[ARCHIVED THREAD] - Help-HK Trigger Pack Problem

Posted: 2/3/2007 2:19:51 PM EDT

Posted here as NFA has the most HK guys.

I was shooting my (HK94) clone today and the hammer strut and spring was popping off the hammer and not allowing the hammer to release when the trigger is pulled. Any ideas why this might be happening, I just switched to an A3 93 stock and I'm wondering if maybe the bolt is travelling to far to the rear and it's kicking the hammer spring and strut off the back of the hammer. Any input would be appreciated. Thanx in advance. Jeff

Posted: 2/6/2007 4:09:56 PM EDT

[#1]

All the clones are build with modified G3 parts and the G3 hammer is not pinned. Hot 9mm ammo will cause the hammer to come off the strut. Replace with a 9mm pinned strut setup.

Posted: 2/8/2007 4:38:51 PM EDT

[#2]

Got it squared it away, it was the A3 stock causing issues, put the A2 on and it ran perfect. Jeff

[ARCHIVED THREAD] - Help-HK Trigger Pack Problem

Armory Sponsor

Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.

Warning

Confirm Action

[ARCHIVED THREAD] - Help-HK Trigger Pack Problem

[ARCHIVED THREAD] - Help-HK Trigger Pack Problem