Armory Sponsor
Posted: 2/10/2013 3:28:03 PM EDT
| I have an AR15 lower with an out of spec safety detent hole. (might be using the incorrect terminology here) I do not have a way to measure it...but I have compared it to several other milspec lowers and the hole is definitely bigger then what it should be. Anyone know where I can send this thing to get fixed? Other then send it back to the maker? I have seen on some other forums of people making little brass sleeves....Since the hole is so big, it causes alot of "play" in the safety selector switch....it still has a crisp break, but goes beyond the 90 degrees...whether its on safe or fire... Thanks for your help gentlemen. |
|
If you don't have measuring tools, drill bits work in a pinch. - such as, a 3/8" bit goes in and wiggles a lot, but a 13/32" does not fit.
Is the detent hold pointed at the center of the safety hole? Otherwise, without pics it's hard to identify what is going on. |
Armory Sponsor