Armory Sponsor
Posted: 10/28/2009 10:33:09 AM EDT
| I'm planning on duracoating a brand new stripped upper and lower receiver and a DD quad rail...other than cleaning and degrease is any other prep work needed? |
|
They recommend that you clean/degrease with TruStrip; some people use brake cleaner. The instructions also say:
...we recommend blasting with aluminum oxide, sand as a second choice. Blasting is not required. Glass bead blasting is not recommended... If you do not have access to basting equipment, simply "rough up" the surfaces with a scotch brite pad...
I would just degrease well and then paint. |
|
Quoted:
They recommend that you clean/degrease with TruStrip; some people use brake cleaner. The instructions also say: ...we recommend blasting with aluminum oxide, sand as a second choice. Blasting is not required. Glass bead blasting is not recommended... If you do not have access to basting equipment, simply "rough up" the surfaces with a scotch brite pad...
I would just degrease well and then paint. agreed. degrease VERY well. |
Armory Sponsor