Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/30/2005 10:32:18 AM EDT
Is there enough recoil with a 10/22 to bump fire it?

Link Posted: 8/30/2005 10:46:12 AM EDT
Link Posted: 8/30/2005 11:23:26 AM EDT
I can get a couple doubles out of mine, but that is about as far as I've gotten so far. I think I am going to try lighten the gun up more (lighter stock, turn barrel down a bit, etc....) when I get more motivation that is.
Link Posted: 8/30/2005 11:27:41 AM EDT
I have a VQ carbon 16in barrel, lightened plastic stock, VQ target hammer, extractor and a bolt buffer. I also have a 4.5x14x40 scope on it. Total with the scope is right under 4.5lbs. I can bumpfire a whole 25rd BC magazine fairly easy. Most of the time I'm in 5-10 round bursts with a second pause because my finger/thumb moved, then bump off the rest of them.
Link Posted: 8/30/2005 12:24:40 PM EDT
How about a picture?
Link Posted: 8/30/2005 1:15:13 PM EDT
Link Posted: 8/30/2005 1:33:06 PM EDT
Cool....I may have to fire up that project again. My biggest trouble was getting the trigger to reset again....I assume a lighter overall gun will help. I have a Volquertsen (sp?) hammer/sear package so I have about a 3# trigger.
Link Posted: 8/30/2005 6:30:41 PM EDT

Originally Posted By michaelj1978:
img.villagephotos.com/p/2004-10/853586/ruger1.JPG


What kind of stock is that?
Link Posted: 8/30/2005 11:36:44 PM EDT
A modified factory Ruger stock.
Link Posted: 8/31/2005 7:06:12 AM EDT

Originally Posted By shotgun:

Originally Posted By michaelj1978:
img.villagephotos.com/p/2004-10/853586/ruger1.JPG


What kind of stock is that?



It is the black plastic stock that came with the gun. The gun was actually the stainless steel barrel/receiver model with the black synthetic stock.

It looked like this before (not my gun but exactly the same)



I cut down the forend and shaped it with bondo. The barrel does not touch any of the forend of the gun, but there is still plenty of room to hold on to up front. I also used bondo to smooth over the rough checkered handgrips behind the receiver.
Link Posted: 8/31/2005 10:10:27 AM EDT
Tenesee Precision arms makes a target trigger with a set screw. The trigger looks awesome and feels very nice. Since there is no over travel it allows the trigger to reset easier and alot of fun to bump. I can dump a full 30 round eagle mag non stop, takes about 4 seconds to do.

http://www.geocities.com/liftedlimited/1022bump.jpg

There I am bumping a mag. You can see some brass in the air. Since the pic is on geocities i cant make it show up, you need to copy and paste into your browser.
Link Posted: 8/31/2005 10:17:15 AM EDT

Originally Posted By ErikM98:
Tenesee Precision arms makes a target trigger with a set screw. The trigger looks awesome and feels very nice. Since there is no over travel it allows the trigger to reset easier and alot of fun to bump. I can dump a full 30 round eagle mag non stop, takes about 4 seconds to do.

http://www.geocities.com/liftedlimited/1022bump.jpg

There I am bumping a mag. You can see some brass in the air. Since the pic is on geocities i cant make it show up, you need to copy and paste into your browser.



4 seconds???Dude try like 2 or less.
Link Posted: 8/31/2005 10:33:39 AM EDT
Bump fired 10/22

Made it hot for ya.
Link Posted: 8/31/2005 10:44:57 AM EDT

Tenesee Precision arms makes a target trigger with a set screw.


Got a website?
Link Posted: 8/31/2005 11:01:23 AM EDT
I use a shoelace because I live in Canada, I never could bump fire anything but my Garand anyways
Link Posted: 8/31/2005 2:09:01 PM EDT
Haven't tried a 10/22, but my MKII with pretravel setscrew and VQ sear bumps quite well!
Link Posted: 8/31/2005 4:25:28 PM EDT
[Last Edit: 8/31/2005 4:26:53 PM EDT by BLY]

Originally Posted By HK_DUDE:

Tenesee Precision arms Tennessee Precision arms makes a target trigger with a set screw.


Got a website?



I think it is Solophoenix's (sp?) website...
Link Posted: 8/31/2005 8:41:26 PM EDT
http://www.tennesseeprecisionarms.com/

That should be their website, it appears to be down. I got the trigger in july last year, hopefully they didnt go out of business. They made a great trigger.
Link Posted: 8/31/2005 8:48:36 PM EDT
As an alternative there are the old BMF Activator mini cranks for the 10/22, four shots per revolution I think.
Link Posted: 9/1/2005 5:53:24 AM EDT

Originally Posted By AK_Mike:
As an alternative there are the old BMF Activator mini cranks for the 10/22, four shots per revolution I think.



Oh, yeah. I have twin 10/22's with MG42 stock sets mounted on a tripod with linked BMF Activators. Approximate cyclic rate of 1050RPM. It can empty two 25 round mags in under 3 seconds.

Here they are before I added the cranks:

http://www.ar15.com/forums/topic.html?b=6&f=11&t=186619
Link Posted: 9/1/2005 8:21:40 AM EDT

Originally Posted By Cpt_Kirks:

Originally Posted By AK_Mike:
As an alternative there are the old BMF Activator mini cranks for the 10/22, four shots per revolution I think.



Oh, yeah. I have twin 10/22's with MG42 stock sets mounted on a tripod with linked BMF Activators. Approximate cyclic rate of 1050RPM. It can empty two 25 round mags in under 3 seconds.

Here they are before I added the cranks:

www.ar15.com/forums/topic.html?b=6&f=11&t=186619



Shweet!
Top Top