Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
12/6/2019 7:27:02 PM
Posted: 10/2/2011 4:37:49 PM EST
Using cut off .358 Winchester cases to cut the 9mm bullets from my pan lube cake increased my lube groove filling percentage from around 50% to just about perfect.

A few pictures:

Cut-off .358 Winchester case:

Silicone meatloaf pan full of pan-lubed 9mm bullets. I use the Lee 125 grain RNFP and size them to .357 for my pistols.

Check out the results!

We don't need no stinking lubrisizer here!

Thought someone here might enjoy.

Take care.

Link Posted: 10/2/2011 4:45:26 PM EST
Now epoxy a handle on it and you'll have a nice push-through cutter.

Link Posted: 10/2/2011 4:52:09 PM EST
Originally Posted By zw123:
Now epoxy a handle on it and you'll have a nice push-through cutter.


It looks like we use almost the same lube.

Link Posted: 10/3/2011 5:59:39 AM EST
I use a once fired 35 Rem. case to cut 38/357 bullets when pan lubing. I drilled out the flash hole and inserted a spring loaded threaded screw that's length adjustable. On the end of the screw I attached a 38 cal FMJ bullet to push out the bullet when it was cut from the lube cake.
Link Posted: 10/3/2011 11:12:10 AM EST
Just got some golf club shaft cut offs from a guy I work with to make me a cake cutter.

My pistol bullets I just push through but I want to use a harder lube for my rifle boolits and they have to be cut out.
Top Top