Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/23/2002 8:40:57 PM EST
Looking for an AR15 bolt carrier that doesn't have the cutout that exposes the firing pin collar.
Link Posted: 3/24/2002 5:13:35 AM EST
M16 bolt carrier?
Link Posted: 3/24/2002 10:34:20 AM EST
Not m16. I know someone makes a bolt carrier that has the rear cut out so it won't engage an autosear, but doesn't have the cutout that exposes the collar on the firing pin. I have a lower that the hammer runs a little high in so it is catching the collar on the firing pin (unless you hold the trigger to the rear causing the disconnector to catch the hammer). I know it isn't a problem with the fire control parts as I've tried 3 different set to no avail.
Link Posted: 3/26/2002 12:19:53 AM EST
[Last Edit: 3/26/2002 12:57:27 AM EST by Shadowblade]
I've heard Colt makes these - not sure though. There was a thread on Bushmaster going PC - which was a rumor - that mentioned it.


Edited:

I just read another post which makes your problem more clear to me. Ignore my Colt remark because I was thinking of something else. The M16 carrier does have an extended ramp - also mentioned was Professional Ordinance carriers. Is there a real problem with what you are running now? I have a preban Bushy with a firing pin that looks like it was beaten to death, but it isn't bent and runs just fine.

Link Posted: 3/26/2002 3:09:29 AM EST
I dont know
Link Posted: 3/26/2002 3:29:13 AM EST
Is this a lower you put together?

Sounds like a problem I had awhile back. Try replacing the hammer with the one with the step, not the rounded hammer.

I replaced it my lower ran like clockwork.

Just a thought, and it is cheaper than buying a new bolt.


Max
Top Top