Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 9/1/2010 12:52:53 PM EDT



Solution! keep it technical not commercial.....
Link Posted: 9/1/2010 1:38:29 PM EDT
[Last Edit: 9/1/2010 1:39:42 PM EDT by Friendly_Crusader]
they're beautiful!

hopefully this will put a dent in the "The FS2000 is garbage because the charging handle breaks..." crowd
Link Posted: 9/1/2010 2:11:51 PM EDT
much much easier to grab onto as well.....more meat!
Link Posted: 9/1/2010 2:31:31 PM EDT
Cool deal man! Those look great.
Link Posted: 9/1/2010 2:48:34 PM EDT
Originally Posted By Judochop:
much much easier to grab onto as well.....more meat!


I see it has a bit more room under there for your finger to flow into when grabbing it.
Link Posted: 9/5/2010 8:42:30 AM EDT
Yikes Judochop, that's quite the paint job on your FS - does it shoot faster like that?
Link Posted: 9/5/2010 1:52:50 PM EDT
i assume hes got an fs2000 for each one of those
Link Posted: 9/8/2010 6:29:00 PM EDT
Link Posted: 9/16/2010 9:59:41 AM EDT
milspec anodizing is taking a week longer than first thought, these little bundles of pure tuffness are almost complete. I shot mine last weekend in an informal competition with 20 of my closest buddies, FLAWLESS operation... The FS2000 is rock solid reliable....
Link Posted: 9/16/2010 10:22:46 AM EDT
Originally Posted By Judochop:
milspec anodizing is taking a week longer than first thought, these little bundles of pure tuffness are almost complete. I shot mine last weekend in an informal competition with 20 of my closest buddies, FLAWLESS operation... The FS2000 is rock solid reliable....


Pictures! Nah I can wait.. Sounds awesome though.
Link Posted: 9/18/2010 8:17:33 AM EDT
Ok... So maybe I have had my head stuck in the ground to long. I see whats going on here but this is the first I have heard about this.
Where do get one of these when they are done
Link Posted: 9/18/2010 2:01:32 PM EDT
[Last Edit: 9/19/2010 8:45:01 AM EDT by cabrito]
Originally Posted By Duratuss:
Ok... So maybe I have had my head stuck in the ground to long. I see whats going on here but this is the first I have heard about this.
Where do get one of these when they are done


+1

How I do I get one for my FS2K?
Link Posted: 9/18/2010 2:28:45 PM EDT
Just browsing (trolling) but wanted give a shout out to enterprising members fabricating enhanced parts, good job sir!
Link Posted: 9/22/2010 4:02:14 PM EDT
bump for any updates
Link Posted: 9/22/2010 10:14:49 PM EDT
Originally Posted By cabrito:
Originally Posted By Duratuss:
Ok... So maybe I have had my head stuck in the ground to long. I see whats going on here but this is the first I have heard about this.
Where do get one of these when they are done


+1

How I do I get one for my FS2K?



+1, Oh ya, I'll take one for my FS2K thank you, where do I sign???
Link Posted: 10/1/2010 4:14:10 PM EDT










Link Posted: 10/1/2010 5:01:58 PM EDT
Oh my those look amazing
Link Posted: 10/2/2010 4:10:01 PM EDT
I want one!
Link Posted: 10/3/2010 9:00:43 AM EDT
I want one. Dumb question coming: Will installing it void the warranty?
Link Posted: 10/3/2010 9:09:24 AM EDT
Originally Posted By xylo:
I want one. Dumb question coming: Will installing it void the warranty?


I don't see how it could.. To install/remove the charging handle claw you just use OREA 892 punch that came with your fs2000, push the roll pin out, then line the hole up with the body and reinsert the roll pin.

If you worry about the warranty, just keep your factory front claw, and replace it if you need to send the rifle in.
Link Posted: 10/3/2010 10:22:35 AM EDT
Originally Posted By Friendly_Crusader:
Originally Posted By xylo:
I want one. Dumb question coming: Will installing it void the warranty?


I don't see how it could.. To install/remove the charging handle claw you just use OREA 892 punch that came with your fs2000, push the roll pin out, then line the hole up with the body and reinsert the roll pin.

If you worry about the warranty, just keep your factory front claw, and replace it if you need to send the rifle in.


+1, That’s exactly what I will be doing!!! So… When will these be available???
Link Posted: 10/4/2010 6:01:45 PM EDT
Originally Posted By Dee_NY:
Originally Posted By Friendly_Crusader:
Originally Posted By xylo:
I want one. Dumb question coming: Will installing it void the warranty?


I don't see how it could.. To install/remove the charging handle claw you just use OREA 892 punch that came with your fs2000, push the roll pin out, then line the hole up with the body and reinsert the roll pin.

If you worry about the warranty, just keep your factory front claw, and replace it if you need to send the rifle in.


+1, That’s exactly what I will be doing!!! So… When will these be available???


Now
Link Posted: 10/5/2010 5:34:53 AM EDT
Originally Posted By Judochop:
Originally Posted By Dee_NY:
Originally Posted By Friendly_Crusader:
Originally Posted By xylo:
I want one. Dumb question coming: Will installing it void the warranty?


I don't see how it could.. To install/remove the charging handle claw you just use OREA 892 punch that came with your fs2000, push the roll pin out, then line the hole up with the body and reinsert the roll pin.

If you worry about the warranty, just keep your factory front claw, and replace it if you need to send the rifle in.


+1, That’s exactly what I will be doing!!! So… When will these be available???


Now



OTW
Link Posted: 10/5/2010 7:15:14 AM EDT

Originally Posted By cabrito:
Originally Posted By Judochop:
Originally Posted By Dee_NY:
Originally Posted By Friendly_Crusader:
Originally Posted By xylo:
I want one. Dumb question coming: Will installing it void the warranty?


I don't see how it could.. To install/remove the charging handle claw you just use OREA 892 punch that came with your fs2000, push the roll pin out, then line the hole up with the body and reinsert the roll pin.

If you worry about the warranty, just keep your factory front claw, and replace it if you need to send the rifle in.


+1, That’s exactly what I will be doing!!! So… When will these be available???


Now



OTW
Link

Link Posted: 10/5/2010 7:47:11 AM EDT
Link Posted: 10/5/2010 8:30:21 AM EDT

Originally Posted By AeroE:
Originally Posted By glockO:

Originally Posted By cabrito:
Originally Posted By Judochop:
Originally Posted By Dee_NY:
Originally Posted By Friendly_Crusader:
Originally Posted By xylo:
I want one. Dumb question coming: Will installing it void the warranty?


I don't see how it could.. To install/remove the charging handle claw you just use OREA 892 punch that came with your fs2000, push the roll pin out, then line the hole up with the body and reinsert the roll pin.

If you worry about the warranty, just keep your factory front claw, and replace it if you need to send the rifle in.


+1, That’s exactly what I will be doing!!! So… When will these be available???


Now



OTW
Link



Read the Conduct Code and the thread about commerce in this forum (I'll bump it back shortly).

Everyone pay attention: Keep ALL of your conversations about selling or buying this product or any other product or personal item out of this forum. If you don't like this policy, take it up with the site owners. However the rules are clear and the owner is not flexible on the topic.


My bad
Link Posted: 10/5/2010 9:25:19 AM EDT
Guys just use IMs and you'll get your answers.

However, reviews and after action reports are still ok here, and I plan I writing one when I get a handle, as I have been waiting for someone to make these for 3 years.
Link Posted: 10/5/2010 9:49:22 AM EDT
[Last Edit: 10/5/2010 10:06:09 AM EDT by Judochop]
while I agree with the policy, I must say that it makes for interesting discussion, when people bring new products to the market and share it with tech forums. Its in the tech forums where dreams can be realized, solutions can be offered, and the snake oil can be seen for what it is. the replacement charging handle is a solution not a business venture, there isn't any MONEY to speak of really. I thank AERO and AR15 for letting the little people like myself display their solutions to problems that are widely documented, with out going overboard to make their point.
Link Posted: 10/5/2010 12:23:12 PM EDT
Link Posted: 10/8/2010 3:09:38 PM EDT
WooWeee! These charging handles look very nice and the finish is excellent.

No reports from me just yet as I don't have time to break out the FS2K.

Can't decide if I want to install it now or just wait for the factory handle to break, if it ever does...

Link Posted: 10/8/2010 3:15:36 PM EDT
i just got mine as well, it's awesome... i installed it and will post a review shortly.
Link Posted: 10/9/2010 3:04:05 PM EDT
IM / Email sent, thank you...
Link Posted: 10/13/2010 4:41:54 AM EDT
Now make an unbreakable switch!
Link Posted: 10/13/2010 2:07:08 PM EDT
Switch problems? what is this switch you speak of?
Link Posted: 10/13/2010 2:42:31 PM EDT
Originally Posted By Judochop:
Switch problems? what is this switch you speak of?


the white "Thing" on the bolt carrier group.. ejects and loads the weapon
Link Posted: 10/13/2010 3:15:27 PM EDT
hmmmmmm. That would be an expensive part to machine....probably not gonna do that one.....
Link Posted: 10/13/2010 3:21:27 PM EDT
Originally Posted By Judochop:
hmmmmmm. That would be an expensive part to machine....probably not gonna do that one.....


also, i was thinking that if the switch were to be made of metal any malfunction, such as a doublefeed, could be cut in half by the switch. A plastic switch just bends the casing.
Top Top