Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/11/2002 12:01:01 PM EST
i would like to adjust the trigger on my bush a2 for a lighter pull. is it possible? or do i need to get a new trigger assembly? fyi, far from being a gunsmith but i'm certain i can follow detailed instructions. thanks.
Link Posted: 12/11/2002 12:35:51 PM EST
Here's a link to the [url=http://www.ar15.com/forums/topic.html?b=1&f=74&t=149423&w=searchPop] 15-Minute Practical Trigger Job for the AR-15[/url]. I used to this to tune the trigger on my Bushy and the results were outstanding. Two things: 1) The web page that hosted the two illustrations is down. Maybe someone has those on their hard drive? 2) I didn't need to tap out the safety on my Bushmaster; the trigger group came out easily without going through that step.
Link Posted: 12/11/2002 2:25:35 PM EST
I think these are the pics you're looking for. Hell, that aint right, I "know" these are the pics you're looking for. I've done this mod on a couple of rifles and it works well. Quick and easy. First pic - Hammer spring modification; [img]http://quartz2.cyberstation.net/~dwpaul/medcop-hammerspringpic1.jpg[/img] Second pic - Trigger spring Modification; [img]http://quartz2.cyberstation.net/~dwpaul/medcop-triggerspringpic1.jpg[/img] When disassembling the fire control group, if you'll remove the hammer first, then the safety switch, and finaly, the trigger, you won't have to "tap out" the safety. To reassemble, simply reverse the procedure. HTH . . . . . Doug . . . . . [beer]
Link Posted: 12/12/2002 12:05:09 PM EST
Thanks for the pics.
Link Posted: 12/12/2002 5:10:26 PM EST
Glad to see you guys like this. If you have any questions, drop me an IM Mail. A Free Man
Top Top