Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 5/8/2003 12:07:20 PM EST
The civilian version of the sir says no gunsmithing and the military 1 says it requiers removal of the delta ring. Do they consider that gunsmithing or what else is involved in instaling the military version.
Link Posted: 5/8/2003 2:41:29 PM EST
I don't own one, but I believe that the only gunsmithing part is to remove the delta ring (this requires removing the barrel).
Link Posted: 5/8/2003 3:04:43 PM EST
I have the "M" and the only thing that needs to be removed is the delta ring assembly. The barrel does NOT have to be removed to do this. You can use a Dremel tool with a cut-off wheel to do the job.
Link Posted: 5/8/2003 3:06:10 PM EST
I own the ARMS SIR #45 civilian model. As you know, it does not require the removal of the delta ring vs the military version which does. I really love my SIR system. I recommend getting the civilian version and not the military version. You will love it.
Link Posted: 5/8/2003 6:27:17 PM EST
Thats good cool that'l be no problem i have a bareel rench so it will be easy. i just wanted to make sure i wasn't going to have to drill any holes in it or anything.
Link Posted: 5/8/2003 7:22:29 PM EST
Yeah, it's that simple. Just remove the delta ring and you are good to go. I prefer the look of the "M" over the "C", myself, but aside from that they are both awesome pieces of gear!
Top Top