Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/25/2005 10:16:47 AM EST
i am using a superior lower, RB Precision LPK and a RRA Upper half. i find that i have to push the trigger forward after shooting to reset the FCG to fire the next round. any ideas on what the problem is. it seems like it is getting better with the more rounds i fire. any help would be great.

Merry Christmas and Happy New Year

Link Posted: 12/25/2005 2:18:41 PM EST
Link Posted: 12/25/2005 2:24:52 PM EST
Link Posted: 12/25/2005 2:27:05 PM EST
[Last Edit: 12/25/2005 2:29:58 PM EST by Dano523]
As above, disco spring with the large coil inserted into the trigger slot.

Hammer spring installed with the front end under the hammer, and the legs forward sitting on the bottom of the receiver cavity.

Also, when you have the trigger out, dry fit the pin into the trigger, You may find a bur in the C channel trigger ends that may need to be knocked off, and don't forget to lube the parts before putting them back in.

And Tweak already beat me to the disco/hammer sears to ckeck for milling end burs that may need to be removed for a clean release.

Link Posted: 12/25/2005 2:29:32 PM EST
Link Posted: 12/25/2005 4:08:15 PM EST
ok guys after a detailed stripping i found that i had somehow installer the hammer spring backwards. i was not putting enough pressure on the hammer to clear the disconnector. all is well now but thank you all for your fast replies.

Link Posted: 12/25/2005 6:41:14 PM EST
Link Posted: 12/26/2005 5:39:37 AM EST
it did start to slip and that is when i put the rifle away for the day.

but i did get about 300 rounds through it. breaking in a new rifle is so much fun

Top Top