Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/26/2004 8:38:25 PM EST
What does the letter "M" above the cloverleaf means? Anyone...
Link Posted: 10/27/2004 4:47:02 AM EST
Link Posted: 10/27/2004 5:26:28 AM EST
mine has the m

did not look at the ramps
Link Posted: 10/27/2004 6:14:17 AM EST
[Last Edit: 10/27/2004 6:15:30 AM EST by QuikSilver]
Actually if it is just an "M" it is the machine code designating an LAR (Grizzly Arms) product. All their "blemished" uppers had this machine mark (no M4 ramps).....

Does the finish not look like typical anodizing? LAR anodizes then puts a teflon coating over it. You'll be able to tell since its a really smooth finish.
Link Posted: 10/27/2004 1:22:28 PM EST
[Last Edit: 10/27/2004 7:04:25 PM EST by Buey]
Oops, My GC has a 4 not a M. I looked again.
Link Posted: 10/27/2004 7:49:39 PM EST
Well, this is a brand new CMMG upper and the "M" is above the cloverleaf in the front of receiver above the Delta ring, I should've made that clear. It would sucked badly if this is a high $$$ blems.
Link Posted: 10/27/2004 10:02:14 PM EST
My LMT has an M
Link Posted: 10/27/2004 11:20:21 PM EST
Perhaps a recevier made by LMT for DPMS?
Top Top