Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/16/2003 2:31:56 PM EST
During a trip to the range today I was
told by a bystander that my shooting of an
AR15 would "burn out the gas tube".

I was shooting a BushMaster 16" Dissipator upper, and using aimed fire to go through a
30-rd. mag. in about 2 minutes.

Given that the rifle was originally designed
as a machine gun, and most manuals I've seen
list the SUSTAINED rate of fire as 12-15 rds.
per minute, I didn't put much stock in what he
said. However, I'm willing to learn from those
who know more than I--is there any validity to
what he said? Thanks.

Link Posted: 11/16/2003 2:39:43 PM EST
Maybe it was all that cheap ammo you were shooting, [:K]!!!
Link Posted: 11/16/2003 2:41:21 PM EST
I've done 2 back to back beta dumps (F/A 200 rounds) before and failed to melt the gas tube. Rumor has it that it fails during the third Beta. I didn't go that far. I have melted my gas rings before. [:D]
Link Posted: 11/16/2003 2:44:16 PM EST
My two cents, if they're made to handle full auto in the military version, I don't see how semi "would burn it up". But I'm not a gunsmith. by the way don't listen to markm. He's just some nob posting negative garbage. He's probably some lib.
Link Posted: 11/16/2003 2:53:12 PM EST
What frisco says is correct.
Link Posted: 11/17/2003 1:05:32 AM EST
If you keep shooting that way you will burn out your barrel before your gas tube.
Link Posted: 11/19/2003 3:40:05 PM EST
In eight years of Army and USAR seevice, I've never seen a gas tube burn out. We also never cleaned them either. It's an urban legand.
Link Posted: 11/20/2003 5:10:54 PM EST
I would think that if this was a problem, they would have seen it in vietnam and corrected the problem. I have fired a bunch of 30 rd mags, 8+, as fast as I can pull the trigger and it has never effected my bushmaster.
Link Posted: 11/21/2003 6:27:06 PM EST
What a stupid statement. Some people grasp at straws to sound smart I swear.
Link Posted: 11/22/2003 9:26:30 AM EST
[Last Edit: 11/22/2003 9:29:13 AM EST by Mikes_Basement]
In my own experience, I had my M16 at a night shoot and I fired 3 or 4 30rd mags of tracer back to back, then fired off a Beta-C mag. I was shooting at aerial targets with fairly long bursts (maybe 10rds or so per burst). The gas tube was glowing cherry red, but it did not fail. I let it cool down for a few minutes then continued firing without any problems. I have seen a couple of gas tubes that have failed so I know it can happen; although, I saw them after they had been removed from the weapons and I don't know under what circumstances they failed. I guess they were either defective, or were abused even worse than I abused mine.
Top Top