AR Sponsor
Posted: 2/12/2003 5:39:51 PM EDT
| Recently bought lower parts kit to assemble another lower. On examination trigger, marked with a M, and hammer marked with a E1 were not the same size as my other ars.Now when I assembled them, when I push back on the hammer, it catches not only on the trigger but on the disconnect. When I pull the trigger the hammer will not fall, only when I push down on the disconect will the hammer disengage and then the hammer will fall when the trigger is pulled. I pulled my rra trigger, hammer disconnect and had no problems. Anyone has similar problems or am I having a brain cramp |
| I bought the parts kit from a dealer, I had held a high standard. I must admit the kit looked of poor quality. I was able to make it work using a combination of hammer with different trigger, trigger with different hammer.Don`t like doing that but they work and thats the main thing. Thanks to all that replied. |
AR Sponsor