Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Tacked The TOOL LOAN Thread (Page 3 of 5)
Page / 5
Link Posted: 1/21/2018 6:05:24 AM EST
I'd like to  borrow an ar10 Geissele reaction rod...
Link Posted: 1/28/2018 9:09:43 PM EST
Anyone have a URX III barrel nut wrench I can borrow?
Link Posted: 2/18/2018 4:29:13 PM EST
[Last Edit: 2/19/2018 11:17:26 PM EST by aeroworksxp]
Link Posted: 2/18/2018 5:38:26 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By cdholmes:
Anyone have a URX III barrel nut wrench I can borrow?
View Quote
Sorry for the delay on the URX wrench... I ran into several issues with the build from issues with the gas block to getting brass formed for loads to test function before returning...
Link Posted: 2/19/2018 9:05:04 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Buck_Naked:

Sorry for the delay on the URX wrench... I ran into several issues with the build from issues with the gas block to getting brass formed for loads to test function before returning...
View Quote
All good brother.
Link Posted: 3/20/2018 4:14:24 PM EST
Anyone have a Geissele reaction rod they are willing to loan me?
Link Posted: 3/24/2018 12:58:58 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By JMG34:
Anyone have a Geissele reaction rod they are willing to loan me?
View Quote
No one? I will gladly send a brand new pmag back with it when returned...
Link Posted: 3/25/2018 2:30:53 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By JMG34:

No one? I will gladly send a brand new pmag back with it when returned...
View Quote
Would you use a Magpul BEV block? I have one of those. No PMag required but I would love help getting a loaned set of headspace gauges in the future when I buy a new barrel (sometimes 0-8 months from now)
Link Posted: 3/26/2018 1:40:48 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Riflenoob:

Would you use a Magpul BEV block? I have one of those. No PMag required but I would love help getting a loaned set of headspace gauges in the future when I buy a new barrel (sometimes 0-8 months from now)
View Quote
I would love to borrow your BEV block. Unfortunately I don't have any headspace gauges or personally know anyone that does though.
Link Posted: 3/26/2018 1:07:12 PM EST
No problem I sent you a PM I will mail you the BEV block on loan.

Appreciate any future poster who reads this giving me a heads up if you can loan headspace gauges for a 5.56 build.
Link Posted: 3/26/2018 6:05:05 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Riflenoob:
No problem I sent you a PM I will mail you the BEV block on loan.

Appreciate any future poster who reads this giving me a heads up if you can loan headspace gauges for a 5.56 build.
View Quote
Thanks! PM sent.
Link Posted: 4/11/2018 11:38:43 PM EST
Anybody have a barrel nut wrench for a DD RIS I could borrow?
Link Posted: 4/16/2018 5:56:07 PM EST
In need of an upper receiver block and tapco armorers wrench to assemble an aero precision m5e1 upper and barrel.
I'd rather not have to buy these for a 1 time build.
Many thanks.
Link Posted: 4/17/2018 12:29:15 AM EST
[Last Edit: 5/15/2018 10:48:26 PM EST by endermend]
I've got lots of things:

  1. Brownells Clam Shell Upper Block
  2. Tubes of Aeroshell Grease
  3. Chinese Armorer's Wrench (For buffer tubes, castle nuts, and stocks)
  4. Brownells USGI barrel nut wrench
  5. Torque Wrench
  6. Roll Pin Punches with standard punches
  7. Tubes of Loctite
  8. BCM KMR Wrench also works with the Castle Nut

If you're interested in using them, just pay for shipping and make a deposit for insurance. Just message me or email me.
Link Posted: 4/19/2018 9:15:21 AM EST
[Last Edit: 6/6/2018 1:14:08 PM EST by Shrockster]
I feel like I have a ton of tools here is as best as I can remember what I have, not all inclusive for sure:

DPMS 308 upper reciever block

Geiselle AR15 Reaction Rod

Geiselle Barrel nut wrench x2

Vseven 5.56 and 308 barrel nut wrench

KAC URX 3 Wrench

Fortis Switch Rail 308 Nut Wrench

Wheeler Bolt Catch Pin Punch set

Geiselle Gas Block Pin starter punch

Magpul Armorer Wrench

BCM KMR wrench

AR15 Upper rec Lapping tool

VLTOR Style Gas Block Jig for drilling pin hole

I am sure there is more
Link Posted: 4/20/2018 4:01:19 PM EST
I lucked out and found a company that makes the vise block for both ar15 and ar10/308 uppers, for a very reasonable price. Then I found a buddy near by that actually had a tapco wrench I can barrow. So I should be all set now. Thanks everyone.
Link Posted: 4/29/2018 2:49:45 PM EST
Hey gang-

Does anyone have an 80% jig and drill bit set they'd be willing to loan me? Naturally I would pay shipping both ways and I throw you a 50-round box of BHA 5.56 for your troubles.

Many thanks.
Link Posted: 4/30/2018 12:43:15 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Amos_Moses:
Hey gang-

Does anyone have an 80% jig and drill bit set they'd be willing to loan me? Naturally I would pay shipping both ways and I throw you a 50-round box of BHA 5.56 for your troubles.

Many thanks.
View Quote
How are you going to be doing your lower, router, mill, etc.

Send me a PM.
Link Posted: 5/1/2018 8:07:44 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By DaveP1:

How are you going to be doing your lower, router, mill, etc.

Send me a PM.
View Quote
PM sent sir.

@DaveP1
Link Posted: 5/7/2018 6:42:49 PM EST
Anyone have a 30mm crows foot wrench I could borrow? Have a barrel nut that only has wrench flats and looks like 1-3/16 or 30mm
Link Posted: 5/15/2018 6:49:17 PM EST
Does anyone have Manson 458 Socom head space gauges and/or a Manson Remington 700 receiver truing kit?

Also the proper size end mill and reamer for a .2770 Ak barrel pin.

Thank you,
Eric
Link Posted: 5/15/2018 6:52:04 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Evile:
Anyone have a 30mm crows foot wrench I could borrow? Have a barrel nut that only has wrench flats and looks like 1-3/16 or 30mm
View Quote
I might have a 1 3/16, I'll look tomorrow.
Link Posted: 6/4/2018 3:51:12 PM EST
Looking to borrow the following:

Upper vice block

Adjustable torque wrench

1 1/8" crows foot drive bit (who knows if anyone has this haha)

I never build my own uppers but my gunsmith has just gotten ridiculous in his pricing for something I can do myself. I'll be glad to pay shipping + extra to borrow these tools and would forever be in your debt. Really dont want to buy all this stuff for one handguard/barrel install. Please message me if any of you guys can help. Thanks a lot.

Here is a picture of the components I'm attempting to put together.
Link Posted: 6/6/2018 1:03:23 PM EST
I got it put together. Thanks anyways.
Link Posted: 6/16/2018 6:49:49 PM EST
Looking for a Remington 700 recoil lug pin jig

Thank you!
Link Posted: 7/1/2018 4:19:13 PM EST
[Last Edit: 7/3/2018 1:52:34 PM EST by HUCK70]
Anyone have a Glock rear sight tool?

*** Got it taken care of, thanks. ***
Link Posted: 7/2/2018 7:50:21 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By HUCK70:
Anyone have a Glock rear sight tool?
View Quote
I have a Factory Glock one... not the best one, and doesnt work with all rear sights(SUppressor sights for example)
Link Posted: 7/11/2018 4:57:06 PM EST
Anyone have a 1911 lower barrel lug cutting tool?

Thank you,
Eric
Link Posted: 7/30/2018 3:59:20 PM EST
[Last Edit: 7/30/2018 6:14:50 PM EST by DamnYankee01]
Anyone have a BEV Block or something similar I can use to install a muzzle device?

Thanks
Link Posted: 8/3/2018 7:32:17 AM EST
I will shortly be in need of a Large Frame SWS barrel nut wrench if anyone has one.
Link Posted: 8/3/2018 9:41:45 PM EST
[Last Edit: 8/9/2018 4:56:40 AM EST by CPT_CAVEMAN]
Does anyone have a router jig i can borrow?
Link Posted: 8/10/2018 1:48:15 PM EST
[Last Edit: 8/10/2018 1:49:42 PM EST by Arygorn]
double post...
Link Posted: 8/10/2018 1:49:07 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CPT_CAVEMAN:
Does anyone have a router jig i can borrow?
View Quote
ar15 or lr308? I have one of each to loan since I upgraded.
Link Posted: 8/10/2018 9:53:58 PM EST
I'm looking to borrow:

.750 gas block dimpling jig

AR15 upper lapping tool

PM or email if you can spare them for a couple days - located in central Texas
Link Posted: 8/16/2018 12:43:09 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CPT_CAVEMAN:
Does anyone have a router jig i can borrow?
View Quote
CPT - keep trying to IM/Mail you - your mailbox is full and rejecting messages.
Link Posted: 8/30/2018 5:51:46 AM EST
[Last Edit: 9/5/2018 1:58:23 AM EST by mpdphil]
Delete
Link Posted: 8/30/2018 5:53:16 AM EST
[Last Edit: 9/5/2018 1:58:56 AM EST by mpdphil]
Delete
Link Posted: 9/11/2018 7:58:00 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Arygorn:
CPT - keep trying to IM/Mail you - your mailbox is full and rejecting messages.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Arygorn:
Originally Posted By CPT_CAVEMAN:
Does anyone have a router jig i can borrow?
CPT - keep trying to IM/Mail you - your mailbox is full and rejecting messages.
@CPT_CAVEMAN
Link Posted: 9/12/2018 4:09:48 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 1057:

@CPT_CAVEMAN
View Quote
Thanks

He got ahold of me finally and it's in route.
Link Posted: 9/16/2018 11:26:52 PM EST
[Last Edit: 9/28/2018 11:25:39 PM EST by prskiller]
Looking to borrow URX 2 wrench.  Will pay shipping both ways and add a pound of Hawaiian coffee to return.

Resolved.
Link Posted: 9/25/2018 8:12:58 PM EST
[Last Edit: 9/25/2018 8:13:42 PM EST by emwen]
Hi all, Does anyone have a carrier key staking tool I can use and get it shipped right back to you the same day or the next at the latest? Either the Michiguns MOACKS or the Brownells. Of course I'd pay for shipping both ways.

Thanks,
Chris
Link Posted: 10/9/2018 10:21:38 PM EST
I've got Clymer 300 BO GO/NO GO gauges if anyones needs them. I've also got a BEV block.

PM me.
Link Posted: 10/13/2018 11:23:13 PM EST
[Last Edit: 10/29/2018 2:17:02 PM EST by Core]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Shrockster:
I feel like I have a ton of tools here is as best as I can remember what I have, not all inclusive for sure:

DPMS 308 upper reciever block

Geiselle AR15 Reaction Rod

Geiselle Barrel nut wrench x2

Vseven 5.56 and 308 barrel nut wrench

KAC URX 3 Wrench

Fortis Switch Rail 308 Nut Wrench

Wheeler Bolt Catch Pin Punch set

Geiselle Gas Block Pin starter punch

Magpul Armorer Wrench

BCM KMR wrench

AR15 Upper rec Lapping tool

VLTOR Style Gas Block Jig for drilling pin hole

I am sure there is more
View Quote
Could use lapping tool and compound and reaction rod. Have a single build so turn around would be a few days. Shipped out. Thank you! ++

Jumping in to show some love, these items are a PITA to order and get in a reasonable timeframe.  Turn around needs to be prompt and willing to ship to the next person on the list or back to me: if this is the case. If you lose or destroy, you will need to replace it with a functional facsimile.. PayPal accepted for shipping: I think each item can be shipped USPS Priority for around $4: if you need multiple items a flat rate small box may be the way to go.  I don't have reasonable access to FedEx or UPS: but they deliver to my location. ;)

Email me if you need:

- 30mm Crow's Foot 1/2" Drive
- Geisselle Barrel Nut Plate 1/2" Drive
- Daniel Defense AR15 RISII Plate: (Don't try to torque it reverse and open it up and keep torque value less than or equal to DD's 50ft/lbs recommendation)
Link Posted: 11/3/2018 8:32:10 PM EST
Need to use a 308 80% lower jig.
Anyone have one?
Link Posted: 11/5/2018 8:06:18 AM EST
[Last Edit: 11/5/2018 8:13:40 AM EST by Arygorn]
PM Inbound...

I have a Gen 1 jig from 80% Arms - please check their site and make sure your lower is compatible before I ship it to you. (All lowers and jigs are not the same)

https://www.80percentarms.com/collections/lower-jigs/products/308-easy-jig
Link Posted: 11/5/2018 8:09:19 AM EST
PM Inbound...

Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Onebad06vtx:
Need to use a 308 80% lower jig.
Anyone have one?
View Quote
Link Posted: 11/5/2018 10:02:44 PM EST
PM back at you
Link Posted: 11/5/2018 10:22:54 PM EST
[Last Edit: 11/7/2018 4:02:11 PM EST by Bad71chevy]
Looking for 80% lower jig for ar15 don't care what one got a free 80% receiver just want to try my hand at it. Have a router and drill will buy tool kit to not use yours, and will replace any part that gets nicked and pay shipping and or deposit. Shipping will be 68137.

Thanks.
Link Posted: 11/20/2018 8:29:19 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Shrockster:
I feel like I have a ton of tools here is as best as I can remember what I have, not all inclusive for sure:

DPMS 308 upper reciever block

Geiselle AR15 Reaction Rod

Geiselle Barrel nut wrench x2

Vseven 5.56 and 308 barrel nut wrench

KAC URX 3 Wrench

Fortis Switch Rail 308 Nut Wrench

Wheeler Bolt Catch Pin Punch set

Geiselle Gas Block Pin starter punch

Magpul Armorer Wrench

BCM KMR wrench

AR15 Upper rec Lapping tool

VLTOR Style Gas Block Jig for drilling pin hole

I am sure there is more
View Quote
Emailed regarding the KAC URX 3
Link Posted: 11/21/2018 10:13:54 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Steamedliver:

Emailed regarding the KAC URX 3
View Quote
Sorry I got it last night but was running around and forgot to reply, I will reply later today
Page / 5
Tacked The TOOL LOAN Thread (Page 3 of 5)
Top Top