AR Sponsor
The TOOL LOAN Thread (Page 2 of 7)
|
Originally Posted By QtrHorse:
Look 3 posts above yours. What part of TX are you in? Originally Posted By QtrHorse:
Originally Posted By OilfieldTrash78:
Looking for a gas block dimple jig...anyone have one I can borrow? Look 3 posts above yours. What part of TX are you in? I am on the West side of Houston. Katy to be exact. |
|
Originally Posted By maggiethecat:
ABSOLUTELY NO FOR SALE OR RENT! Post the tools you will loan, or want to borrow here. Let's keep this thread about the tools only. I have an upper receiver block. Fits the Aero M5 upper. Where are you in Texas? I may need to use that M5 upper receiver block |
|
I know this is a longshot, but I was wondering if anyone who has a 5D tactical jig would loan it to me?
I'v made a few 80%'s with a few jigs and want to try out this jig since its getting a lot of buzz. I'd be willing to purchase the tooling from 5D so you wouldn't have to worry about me messing yours up, send you my current jig as collateral(80%arms) and would pay to replace any part of the jig that gets damaged if something goes wrong as well as paying for shipping. If you're willing to loan it to me, let me know. |
"These blistered hands will come to be the iron fist that bestows true and proper perspective."
|
Manchester NH area resident here. I've got quite a few I'd be willing to loan out.
-Receiver vice block -Wheeler trigger pull gauge -Fat tourque wrench for small stuff, and a bigger one for barrel/muzzle devices -30mm scope ring lapping bar -brass and polymer punch set Also have a drill press w/ various metalwork bits and taps, a drawer full of files and polishing compounds, and a bunch of other shit that I can't think of ATM. Email me at [email protected] w/ "tool loan request" as the subject since I won't remember to check this thread for replies. And if anyone's got a spare 1" scope lapping bar I could borrow, I'd appreciate it. |
|
Originally Posted By alwaysstuck:
If anyone had .308 go/no-go gauges that I could borrow that'd be great. much appreciated @maggiethecat I still have your vise block will get it mailed out this week. |
"I Don't Give a F$&@"- Dave
Certified Sig Armorer-Classic Pistols
Joined:
Mar 2008
Posts:
2124
EE: 100% (245)
MI, USA
|
I need of a loan for a KAC URX 3.0/3.1 barrel nut wrench.
Wanted to purchase a d. wilson KAC URX wrench, but he's nolonger selling them due to people misusing them. IM or email works. |
NRA Benefactor Member, Veteran; US Army 5th Corps 1970-1972
The only time in my life when I got to Rock-N-Roll, and the ammo was free!!
(Avatar is the Unit's shoulder patch)
The only time in my life when I got to Rock-N-Roll, and the ammo was free!!
(Avatar is the Unit's shoulder patch)
|
crowfoot wrench 1-5/16" (Sunex 97741) for free
I ordered this crowfoot wrench because I want to mount the propietary barrel nut which is included in the 2a BL rail I ordered. Because it is impossible to get this tool here in Europe I ordered it to my U.S.-freight forwarders adress. Now the package has arrived in CA but the shipping costs to Austria would be too high (I found an other dealer who sends this item directly to me for less), so it is unprofitable for me to forward this package. It is too good to throw it away but I don't want that it causes additional costs to me. So if someone can pick it up in Hawthorne, CA 90250 you can have it for free. The first one who write me a message will get the adress and the parcelnumber. |
Certified Sig Armorer-Classic Pistols
Joined:
Mar 2008
Posts:
2147
EE: 100% (245)
MI, USA
|
Originally Posted By HimIOwe:
Will 5.56 gauges work in .223 Wylde? If so, I'm interested. Originally Posted By HimIOwe:
Originally Posted By Mguti:
I have go/no go gauges in 5.56 I'd loan out. PM if interested and we can discuss shipping and deposit fee. |
|
Originally Posted By Mguti:
Sorry just seen this. I'm not sure if they will work in .223 Wylde. If you find out let me know we can talk about you using my gauges. Originally Posted By Mguti:
Originally Posted By HimIOwe:
Originally Posted By Mguti:
I have go/no go gauges in 5.56 I'd loan out. PM if interested and we can discuss shipping and deposit fee. |
| I should finally have my piston kit in the next few weeks so I would like to plan for its assembly. I am in real need of a Geissele Reaction rod to install the Faxon barrel as my upper is a CMT billet and I am not sure if a clamshell block will fit on it. Naturally I will cover shipping both ways and won't hold onto tools any longer than is absolutely necessary. Thank you for your consideration. cheotis(at)gmail.com or 901-833-66 two six. |
|
Originally Posted By Philly2123:
Would like to borrow a SLR .750 dimpling jig. Wouldn't have for more than a week, just need to do one barrel. Thanks |
|
GOT ONE!
-Michael *Still looking as of 10/24/17 
*Still looking as of 11/03/17  |
-Things do not happen. Things are made to happen. -JFK
-Beware the fury of a patient man.
-Thousands and thousands of laws....All for just ten commandments.
-"alot" is not a word.
-Beware the fury of a patient man.
-Thousands and thousands of laws....All for just ten commandments.
-"alot" is not a word.
|
I'm looking to borrow a couple things,
1. 5.56 HeadSpace Guages 2. Front Sight Base Block 3. Snap Ring Pliers. Please IM me if you have anything, and we can work out an arrangement. Thanks, Endermend |
"The are no women on the internet. The men are men, the women are men, the girls are FBI agents" (Ancient Kekistani Proverb)
|
I have tons of tools.. if someone needs something here in NC give me a shout.
(Especially car based tools) But, for AR builds i can loan the following: Carbine handguard removal tool Barrel Wrench Castle Nut Wrench Punches And i have a vise if someone needed to come use it. |
The TOOL LOAN Thread (Page 2 of 7)
AR Sponsor