User Panel
User Panel
User Panel
|
Posted: 5/17/2020 6:33:12 PM EST
[Last Edit: MARSH1]
[#1]
Originally Posted By jeepinbanditrider: If ya'll had a fiber powered optic I'd be all over it. I'm not a fan of battery powered stuff I have to switch on and off. At least with the micro red dots battery life is measured in years. I can deal with that. I'd rather just put a little tape on a fiber to darken it to my liking then deal with electronic light up optics. We do have TA44 Acogs with the same ACSS reticles in them. LINK |
|
|
|
|
Posted: 5/18/2020 6:49:46 AM EST
[#2]
Quote HistoryOriginally Posted By KimberZ71: I couldn’t get the reticle in focus, so imagine the FSB fuzzy and a crisp ACSS reticle  . I’ll try later to see if aiming at something in the distance will help the focus. I think the brightness was at about 5 here, I kept changing it trying to get a good image but I suck:https://i.imgur.com/X4wMiR0.jpg I came to ask about this optic with an FSB, is it distracting? |
|
|
|
|
Posted: 5/18/2020 6:54:49 AM EST
[#3]
Quote HistoryOriginally Posted By SickMAK90: I came to ask about this optic with an FSB, is it distracting? For me, the FSB is distracting with any 0/low power optic at cowitness height... I have one rifle with a fixed FSB and it has irons in the rear. |
|
|
|
|
Posted: 5/18/2020 9:48:27 AM EST
[#4]
Quote HistoryOriginally Posted By SickMAK90: I came to ask about this optic with an FSB, is it distracting? It doesn't bother me but I'm also fine using a red dot with a FSB rifle. If you're ok with that, this set up should work for you. That said, I'm thinking of getting a riser or higher QD mount for it to see if I like that more. I have a 16" non-FSB I can put the 2x on, but really like it on my 12.5". |
|
|
|
OR, USA
|
Posted: 5/19/2020 4:57:15 PM EST
[#5]
Quote HistoryAny ETA on when the 4X Acog’s with ACSS will be back in stock? |
|
|
|
Posted: 5/19/2020 6:50:12 PM EST
[#6]
Quote HistoryOriginally Posted By Glock9mm1990: Any ETA on when the 4X Acog’s with ACSS will be back in stock? Mid to late June. We have them up for pre order. Link to green Link to red |
|
|
|
|
Posted: 5/24/2020 2:48:04 PM EST
[#7]
A few people have emailed that they want to use a two screw LaRue or ADM QD Acog base. You will need two long screws. Just shoot me a email with you address and we will send them to you.
|
|
|
|
OH, USA
|
Posted: 5/25/2020 5:10:01 PM EST
[#8]
Quote HistoryOriginally Posted By MARSH1: A few people have emailed that they want to use a two screw LaRue or ADM QD Acog base. You will need two long screws. Just shoot me a email with you address and we will send them to you. Are we able to utilize two screws with your standard mount? |
|
|
|
Posted: 5/26/2020 9:04:23 AM EST
[#9]
Quote HistoryOriginally Posted By HunterKiller86: Are we able to utilize two screws with your standard mount? No and you don't need them. We have tested stock mount thousands of rounds on a .308 SCAR |
|
|
|
|
Posted: 5/27/2020 6:22:40 AM EST
[Last Edit: MARSH1]
[#10]
|
|
|
|
OR, USA
|
Posted: 5/27/2020 1:58:05 PM EST
[#11]
Quote HistoryAre we still looking at late June for the Primary Arms SLx 1-6x24mm FFP scope as well? Just placed an order for one. |
|
|
|
Posted: 5/27/2020 3:08:31 PM EST
[Last Edit: MARSH1]
[#12]
Quote HistoryOriginally Posted By Glock9mm1990: Are we still looking at late June for the Primary Arms SLx 1-6x24mm FFP scope as well? Just placed an order for one. Yes still on tract for June! |
|
|
|
OR, USA
|
Posted: 5/27/2020 3:09:56 PM EST
[#13]
Quote HistoryOriginally Posted By MARSH1: Yes still on tract for June! Great, can’t wait to get mine :D |
|
|
GBR
|
Posted: 5/28/2020 9:35:43 AM EST
[#14]
Are the Height over bore measurements available for the different spacers please? And i don't suppose you know when it will be added to Strelok?
My first PA Optic purchase and i've got to say this looks like it might become a true classic for competition work. |
|
|
|
Posted: 5/28/2020 1:54:06 PM EST
[Last Edit: MARSH1]
[#15]
Quote HistoryOriginally Posted By PewPewUK: Are the Height over bore measurements available for the different spacers please? And i don't suppose you know when it will be added to Strelok? My first PA Optic purchase and i've got to say this looks like it might become a true classic for competition work. I have asked engineering for exact measurements. Dimitri is already working on getting the reticle added to the apps. Engineering came back with height over rail. With the 3 spacers height over rail is 1.41", 1.535", 1.64" With no spacer height is 1.075". |
|
|
|
|
Posted: 5/28/2020 6:14:39 PM EST
[Last Edit: HammerForged]
[#16]
I ordered one for my AK with a Midwest industries AK mini ACOG mount, I see y'all shooting that setup on Instagram, any pictures anywhere?
@MARSH1 |
|
|
|
|
Posted: 5/28/2020 6:37:23 PM EST
[#17]
Quote HistoryOriginally Posted By MARSH1: I have asked engineering for exact measurements. Dimitri is already working on getting the reticle added to the apps. Engineering came back with height over rail. With the 3 spacers height over rail is 1.41", 1.535", 1.64" With no spacer height is 1.075". Any plans for a spacer that would yield a 1.93” height? |
|
|
|
GBR
|
Posted: 5/29/2020 6:10:57 AM EST
[#18]
Thank you Sir!
|
|
|
|
Posted: 5/29/2020 2:15:16 PM EST
[#19]
Keeping this optic. Sure enough that I am going to rattlecan it...that kinda makes it a permanent commitment.
|
|
|
|
|
Posted: 5/30/2020 9:38:23 PM EST
[#20]
Quote HistoryOriginally Posted By KimberZ71: Any plans for a spacer that would yield a 1.93” height? Not in the works. How much demand is there for that height??? |
|
|
|
|
Posted: 5/30/2020 10:42:02 PM EST
[#21]
Quote HistoryOriginally Posted By MARSH1: Not in the works. How much demand is there for that height??? All the demand. |
|
|
|
|
Posted: 5/31/2020 5:58:57 AM EST
[#22]
Quote HistoryOriginally Posted By MARSH1: Not in the works. How much demand is there for that height??? I know I would buy one. Being same footprint as the mini ACOG, I think they would sell. |
|
|
|
|
Posted: 5/31/2020 8:38:27 AM EST
[#23]
Quote HistoryOriginally Posted By MARSH1: Not in the works. How much demand is there for that height??? Quote HistoryOriginally Posted By MARSH1: Originally Posted By KimberZ71: Any plans for a spacer that would yield a 1.93” height? Not in the works. How much demand is there for that height??? Would that be lower 1/3? Since I am running a FSB I think that would be my preferred height. |
|
|
|
|
Posted: 6/1/2020 8:42:29 AM EST
[#24]
Quote HistoryOriginally Posted By SickMAK90: Would that be lower 1/3? Since I am running a FSB I think that would be my preferred height. You can't cowitness irons with a magnified optic. |
|
|
|
|
Posted: 6/1/2020 9:57:41 AM EST
[#25]
True, BUT the optic needs to be high enough or have enough magnification so that the ranging lines clear the shadow of the FSB. I do not use a FSB, so I cannot give a recommendation on this.
|
|
|
|
|
Posted: 6/1/2020 10:06:58 AM EST
[#26]
Quote HistoryOriginally Posted By MRW: True, BUT the optic needs to be high enough or have enough magnification so that the ranging lines clear the shadow of the FSB. I do not use a FSB, so I cannot give a recommendation on this. Got it!!!!! Thanks! We will play with different height spacers to accomodate for that |
|
|
|
|
Posted: 6/1/2020 11:40:49 AM EST
[Last Edit: NoveskeFan]
[#27]
Quote HistoryOriginally Posted By MARSH1: Got it!!!!! Thanks! We will play with different height spacers to accomodate for that With the tallest mount in the box (I believe 1.64”) the FSB is visible, but the reticle ranging line seems to sit above the FSP, at least with my cheek weld and F marked FSB on BCM Kino upper. It’s ok, as it’s similar to a red dot/FSB combo sight picture. I’d like to try a taller mount mostly out of curiosity, since I’ve never tried a 1.93”. Best pic I can get to show what I mean: 
|
|
|
|
|
Posted: 6/3/2020 12:59:21 PM EST
[#28]
And... the Aimpoint Micro used as comparison in my review has malfunctioned. dot turning off under recoil, and a smack to the side brings it back on again.
I'm sending it in to Aimpoint for warranty repair. I'm the original owner, I bought it new. If they can't fix it for free, I'm replacing it with something with an etched reticle. |
|
|
|
FL, USA
|
Posted: 6/5/2020 5:39:41 PM EST
[#29]
@MARSH1
Any idea when the next shipment goes out for preorders? |
|
|
|
Posted: 6/6/2020 3:36:00 PM EST
[#30]
Quote HistoryOriginally Posted By MRW: All right, it's live. Here's my unsolicited review of the PA GLx 2x http://www.thenewrifleman.com/is-the-primary-arms-glx-2x-the-best-value-in-low-power-prism-optics/ @MARSH1 thank you again and I hope you sell a ton of these. It's an ACOG-killer Great review. Thanks. It puts this scope on my next buy list as soon as I can . |
|
|
|
|
Posted: 6/6/2020 4:15:38 PM EST
[Last Edit: TxLewis]
[#31]
Quote HistoryOriginally Posted By MARSH1: Yes 50 yard zero Quote HistoryOriginally Posted By MARSH1: Originally Posted By WallyGeorge: Just placed my order but the spec sheet doesnt specify zeroing for barrel length and bullet drops like the other acss reticles. Do i still zero at 50 yds for a 5.56 20" using m855? Yes 50 yard zero So, out of a16" ar, this will be a 50 yd/250yd zero? Is that specific to 55gr mil or 62 he mil? Thanks, too many good reviews here, great job PA. |
|
|
|
USA
|
Posted: 6/6/2020 5:53:27 PM EST
[#32]
I'm seriously considering putting up my Aimpoint for trade on one of these. Is anyone running one of these on a pistol/SBR? How do you like it if so?
|
|
|
|
Posted: 6/6/2020 10:46:10 PM EST
[#33]
Quote HistoryOriginally Posted By MARSH1: You can't cowitness irons with a magnified optic. Quote HistoryOriginally Posted By MARSH1: Originally Posted By SickMAK90: Would that be lower 1/3? Since I am running a FSB I think that would be my preferred height. You can't cowitness irons with a magnified optic. I know that but I’d want the FSB as out of the way as possible. |
|
|
|
|
Posted: 6/6/2020 11:15:43 PM EST
[Last Edit: 02Overlander]
[#34]
Quote HistoryOriginally Posted By olds442tyguy: I'm seriously considering putting up my Aimpoint for trade on one of these. Is anyone running one of these on a pistol/SBR? How do you like it if so? Just received a couple of days ago & haven't had a chance for a range session yet to zero but first impressions, very impressed w/ the build quality & glass... even the packaging was upscale. Long time owner & fan of the 1-6x ACSS scopes but the GLx2 is built to a noticably higher standard.  |
|
|
|
|
Posted: 6/7/2020 6:12:11 AM EST
[#35]
Quote HistoryOriginally Posted By olds442tyguy: I'm seriously considering putting up my Aimpoint for trade on one of these. Is anyone running one of these on a pistol/SBR? How do you like it if so? I sold an Aimpoint to fund my GLX-2X. Haven't regretted it at all, if that helps. |
|
|
|
USA
|
Posted: 6/7/2020 10:21:14 AM EST
[#36]
Quote HistoryOriginally Posted By 02Overlander: Just received a couple of days ago & haven't had a chance for a range session yet to zero but first impressions, very impressed w/ the build quality & glass... even the packaging was upscale. Long time owner & fan of the 1-6x ACSS scopes but the GLx2 is built to a noticably higher standard. https://thumbnails-photos.amazon.com/v1/thumbnail/Xct7PIYISReVIDRzwAtgxQ?viewBox=1920%2C750&ownerId=A3GV82HUVR9KRR That's good to know. I always thought the 3X and 5X prisms had better glass than the 1-6, so I'm glad that's the case here too. |
|
|
USA
|
Posted: 6/7/2020 11:35:30 PM EST
[Last Edit: cj3waker]
[#37]
What would it take to get a horizontal hash on the 300 yard stadia on the acss reticle? it's my only complaint with that reticle
|
|
|
|
Posted: 6/8/2020 7:53:29 AM EST
[#38]
Quote HistoryOriginally Posted By cj3waker: What would it take to get a horizontal hash on the 300 yard stadia on the acss reticle? it's my only complaint with that reticle Not a bad idea but any change would take months to get to market. With as backed up as everthing is I don't see it happening |
|
|
|
GA, USA
|
Posted: 6/8/2020 9:15:43 AM EST
[#39]
Reticle is now in strelok.
Woo! |
|
|
|
Posted: 6/8/2020 5:22:57 PM EST
[#40]
Quote HistoryOriginally Posted By Klyde96: @MARSH1 Any idea when the next shipment goes out for preorders? This. |
|
|
|
|
Posted: 6/8/2020 6:07:34 PM EST
[#41]
Quote HistoryOriginally Posted By bigvic: This. Quote HistoryOriginally Posted By bigvic: Originally Posted By Klyde96: @MARSH1 Any idea when the next shipment goes out for preorders? This. x2 I got my 300 bo all dialed in and love it so much I ordered one for my 5.56 pistol from the second batch. |
|
|
|
|
Posted: 6/15/2020 7:50:35 AM EST
[#42]
Quote HistoryOriginally Posted By Klyde96: @MARSH1 Any idea when the next shipment goes out for preorders? Pre orders placed now are still scheduled to ship by the end of the month (June). Factory is on schedule but transit time and time to clear customs varies so could get pushed to early July. |
|
|
|
|
Posted: 6/15/2020 6:50:41 PM EST
[#43]
@MARSH1
Ever thought of putting an etching (or silkscreen) of the reticle w/ ranges on the top or side if the optic's body? |
|
|
|
|
Posted: 6/15/2020 9:29:03 PM EST
[#44]
and directional arrow inside the caps so you know which way to turn them after you flip them over
|
|
|
|
GBR
|
Posted: 6/17/2020 7:36:06 AM EST
[#45]
Quote HistoryOriginally Posted By MARSH1: Pre orders placed now are still scheduled to ship by the end of the month (June). Factory is on schedule but transit time and time to clear customs varies so could get pushed to early July. Quote HistoryOriginally Posted By MARSH1: Originally Posted By Klyde96: @MARSH1 Any idea when the next shipment goes out for preorders? Pre orders placed now are still scheduled to ship by the end of the month (June). Factory is on schedule but transit time and time to clear customs varies so could get pushed to early July. I've got a Pre-order from your EU Supplier do you ship direct or am i gonna get doubled bumped on the shipping? |
|
|
|
Posted: 6/17/2020 7:54:48 AM EST
[Last Edit: MARSH1]
[#46]
Quote HistoryOriginally Posted By PewPewUK: I've got a Pre-order from your EU Supplier do you ship direct or am i gonna get doubled bumped on the shipping? Not sure what you mean that you would be double bumped. We ship bulk orders direct to our international dealers/distributors. |
|
|
|
GBR
|
Posted: 6/18/2020 6:03:54 AM EST
[Last Edit: PewPewUK]
[#47]
Quote HistoryOriginally Posted By MARSH1: Not sure what you mean that you would be double bumped. We ship bulk orders direct to our international dealers/distributors. I just wondered if QC was done in house (USA) or on site at the manufacture site? Normally i wouldn't care but its taking a long time to ship stuff from certain places (China ironically seems ok) My local posty is wondering what the hell i'm building because there's a lot of weird post coming in at the moment.... It sucks to be a shooter in the UK you can't get jack locally and everything good costs a Firstborn child and a Kidney to buy :) I needed to have 8 kidneys to pay for my KL-12 (not helped by my love of Four Roses bourbon either) :) |
|
|
|
Posted: 6/18/2020 10:07:39 AM EST
[#48]
Quote HistoryOriginally Posted By PewPewUK: I just wondered if QC was done in house (USA) or on site at the manufacture site? Normally i wouldn't care but its taking a long time to ship stuff from certain places (China ironically seems ok) My local posty is wondering what the hell i'm building because there's a lot of weird post coming in at the moment.... It sucks to be a shooter in the UK you can't get jack locally and everything good costs a Firstborn child and a Kidney to buy :) I needed to have 8 kidneys to pay for my KL-12 (not helped by my love of Four Roses bourbon either) :) Got it. We never ship from the factory to end user or dealer. First QC is done at the factory. Once it is received in our Texas facility every optics is opened and run through our US QC line before it is shipped to end user or dealers |
|
|
|
GBR
|
Posted: 6/18/2020 11:02:31 AM EST
[#49]
Thank you for the info.
i might be up for biggest Air miles optic :) China to Texas to Slovenia to UK wonder if anyone can beat that :) |
|
|
NV, USA
|
Posted: 6/22/2020 4:32:39 PM EST
[#50]
@mrw
I enjoyed your video. You sold me. I just ordered one to try out. Thanks. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2023 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
