Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/29/2006 6:38:05 PM EST
Super tight and binds on all my GI mags.Whats the fix? I don't wanna send these 2 Lowers back but cannot seat mags,they bind up. Any experience here? Carefull filing?I don't wanna file off the anodizing........
Link Posted: 1/29/2006 6:45:37 PM EST
have you contacted LCW to see if they would take care of it for you?
Link Posted: 1/29/2006 7:08:47 PM EST
My LCW lower's mag well is a little on the tight side, but not to the point of binding. Maybe they were a little too liberal with the duracoat?
Link Posted: 1/30/2006 3:07:36 AM EST
Hmm... if I'm not mistaken. LCW lowers are made by LMT aren't they?

If so, all I'll say is this is not the first time people have had problems with LMT lowers having tight mag wells. My PWA\LMT lower had a tight mag well but it has loosened up with time\use (but mine wasn't "super tight" to start with).

If you have two of these and they are both "super tight" then I personally would send them both back and ask the dealer to pay for any shipping costs.
Link Posted: 1/30/2006 3:22:29 AM EST
[Last Edit: 1/30/2006 3:23:06 AM EST by Yojimbo]
This issue has been brought up before about LMT manufactured lowers.

Assuming you have good USGI mags I would definitely contact the dealer you bought it from and see about getting the lower replaced. I would not recommend trying to fix yourself.

BTW, I also have an LCW lower but my mag well is in spec and all my mags drop free.
Link Posted: 1/30/2006 4:51:56 AM EST
Yes, the Lauer lowers are made by LMT, and I don't think they're duracoated (from seeing my friend's).

Contact Lauer. They are a relatively small business and I'm sure they'll take care of you.
Link Posted: 1/30/2006 5:17:33 AM EST
+1 on contacting lcw before you fubar the magwell
Top Top