Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/19/2004 4:14:11 PM EST
So I've never taken an upper completely off the lower....How do I do this?
Link Posted: 9/19/2004 4:37:02 PM EST
There is a pin at the very front of the receiver, just like the takedown pin in the rear, push it in. Then the upper should just lift off.
Link Posted: 9/19/2004 4:38:35 PM EST
There isn't a spring involved in there somehow I need to worry about?
Link Posted: 9/19/2004 4:49:19 PM EST
Nope. Change uppers on M16 all the time
Link Posted: 9/19/2004 4:54:22 PM EST
Alrighty, just took a little pressure, I was worried about the pin holding and spring holding the pivot pin in place....I see now....Thanks
Link Posted: 9/19/2004 4:58:24 PM EST
Link Posted: 9/19/2004 7:00:45 PM EST
Mr. Cobb:


I think it's time you got an operators manual for your rifle. They are available all over the web for free. Please get familiar with your weapon before you hurt yourself or someone else.
Link Posted: 9/20/2004 7:45:29 AM EST
WCobb, you can download a manual from here on ARF com, go up to the bar next to "Equipment Exchange" the one that says "Information" click on it and then select "Manuals and Downloads" In that file there are plenty of manuals to help you out, both with proper maintanence and Cleaning as well as basic safety with an AR, Read them carefully

I hope this helps, and welcome to ARF com!
Top Top