Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/19/2002 8:27:00 AM EST
Hello,

I have an RRA with two forward sling mounts. One is the standard bottom mount and the other is the side sling adapter. Can anyone tell me how to remove them? I plan to remove just one of the two but would like to know how to remove both if possible.

Thanks!

Drivie
Link Posted: 12/19/2002 11:14:09 AM EST
I find it hard to believe that nobody knows how to do this... Should I be posting this in a forum other than discussions? Help please. Drivie
Link Posted: 12/19/2002 11:37:56 AM EST
The build it yourself section would have been better, but its good anywhere. If you take a punch and place it in the hole where the rivit is set and take a hammer it should punch it through. I've done it before and it works..
Link Posted: 12/19/2002 11:40:30 AM EST
Maybe you just asked a dumb question? [{:)] Seriously though, I would like to know also. I would like to remove the original one and add a side sling adaptor. Pretty silly having two. JBritt
Link Posted: 12/19/2002 1:21:54 PM EST
Lawman, thanks for the reply. I'll give that a try. JBritt, DOH! ...it seems silly to me to have two sling mounts also. Drivie
Link Posted: 12/19/2002 2:04:23 PM EST
[Last Edit: 12/19/2002 2:05:06 PM EST by Watch-Six]
I also have taken the correct sized punch and simply driven out the rivet with a hammer. No big deal. If that doesn't do it you could drill out the rivet first, but I have not found that to be necessary. Watch-Six
Link Posted: 12/19/2002 4:04:48 PM EST
I just took a Dremel and cut the rivet and sling loop in the center...took about 5 seconds. To remove the side sling adaptor...just tap out the 2 roll pins on the right hand side of the sight tower. Bradd
Link Posted: 12/19/2002 4:11:32 PM EST
Thanks guys for the replies. I'll give it a try. Drivie
Link Posted: 12/19/2002 7:29:23 PM EST
If you carefully drive the rivet out with a drift or punch, you can re-use both pieces. I have transplanted my "extra" sling loops on a couple of peoples uppers that didn't have them. [;)]
Link Posted: 12/19/2002 7:57:12 PM EST
Yep. Just a standard punch and a light hammer, two strokes and the rivet was gone. No big deal at all.
Top Top