Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 4/12/2006 3:34:33 PM EST
I just installed a Rock River Arms trigger on my Dpms .308. I see that the hammer spring rests against the trigger pin and in it's groove to keep it from coming out on its own. My question is , what keeps the hammer pin located? Mine seems to move from side to side rather easily and I'm afraid it might come out.
Link Posted: 4/13/2006 10:50:15 PM EST
I use anti-walking pins, you can get them on many sites. I got mine from Bushmaster's online shop. Basically, they're pins with a wide head, and a retainer nut/spring at the other end.

Yes, before the anti-walking pins, I've had the trigger pin pop out ...

Hope that helps.
Link Posted: 4/14/2006 2:58:00 AM EST
There is a captive spring and detent in the hammer which keeps the hammer pin from walking. Look through the hammer axel hole and you will see it in there.
Top Top