Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 2/25/2007 5:42:23 PM EST
[Last Edit: 2/25/2007 6:00:15 PM EST by okguy91]
what aimpoint is this and mount I have there tac carry handle. I am a eotech man never mess with aimpoints. http://www.rockriverarms.com/item-detail.cfm?ID=AR0052CASY&storeid=1&image=chndls.gif&CFID=31793407&CFTOKEN=30764724
Link Posted: 2/25/2007 8:05:06 PM EST
it's either a comp ML3 or ML2 (same body) i have the ML3 mounted on my tactical "cary handle" with an aimpoint low ring, the end result is lower 1/3 co witness



in the pic the aimpoint has the protective rubber cover on it (it's been removed) so it may look a bit different than the RRA pic
Link Posted: 2/26/2007 4:52:09 PM EST
THANKS
Link Posted: 2/26/2007 7:23:39 PM EST
[Last Edit: 2/26/2007 7:26:22 PM EST by Hoplophile]
That's one of the original CompM or ML models, but it doesn't matter for your purposes because everything in the CompM series is the same size.

The ring in that pic is the cheap little thing that Aimpoint shipped with those older models. They stopped including it because everybody was buying a better mount and tossing that ring in the box o' parts in teh back of the closet and forgetting about it. ETA that the low-mount ring as shown in the post above is a much better ring and is easier to find since it's still in production. It's also the lowest ring available at this time and may be the only one that'll work with that rail height.
Link Posted: 2/26/2007 9:55:16 PM EST
[Last Edit: 2/26/2007 9:55:43 PM EST by Vellcrow]
This is the RRA I just bought. The Aimpoint works nicely with the low factory ring:


Top Top