Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/19/2017 7:27:10 PM
Posted: 10/28/2002 10:18:55 PM EDT
Anybody using this short stock? Opinions?
Link Posted: 10/28/2002 10:43:24 PM EDT
I have one on my M4gery now, i like it and it works great, but i need a little longer stock...this one is about the same length as a fully collapsed CAR stock.

just my .02

i am trading it btw, if you're interested in one...
Link Posted: 10/29/2002 12:40:22 AM EDT
Put a Knight's Armament 1" Stock Extension Sling Mount Combo, P/N: 98506, and it should help. This will get the stock out to about the length of a collapsible 4 position at the first notch.

Lynn
Link Posted: 10/29/2002 4:19:17 AM EDT
[Last Edit: 10/29/2002 4:20:02 AM EDT by davkenrem]
I have one on my OlyArms CAR97-M4. I got it at Camp Perry from Fulton Armory. They were selling it with a Adjustable butt plate with which you can adjust the length of pull.
I like it.
Link Posted: 10/29/2002 7:09:26 AM EDT
Had one and sold it, it was to short to get a proper cheek/nose weld with. The one inch ext. may help with that, I prefer the A-1 stock
Link Posted: 10/29/2002 7:29:52 AM EDT
I had the RRA LE Entry stock on a 9mm carbine and at first I liked it because it gave the overall appearance of a very short carbine but the feel was not right. I went to an A1 buttstock and it's much better for me.
Link Posted: 10/29/2002 7:40:32 AM EDT
Looks like it would work great with a reflex sight!
Link Posted: 10/29/2002 8:00:36 AM EDT
IM me if you decide on one..have one- brand new-..for sale
Link Posted: 10/29/2002 8:45:05 AM EDT
small chicks and men with thick winter clothes on dig it.

davkenrem,
Can you adjust the butt plate in the field? Please describe the mechanism.

Link Posted: 10/29/2002 8:53:16 AM EDT

Originally Posted By Boomholzer:
Can you adjust the butt plate in the field? Please describe the mechanism.



Only if you bring your two allen wrenchs along. Its a simple clamp and pipe setup for length adjustment - but it takes tools. Height, cant, and lengh-of-pull, are adjustable with 2 different sized allen wrenches.
Link Posted: 10/29/2002 10:59:26 AM EDT

Originally Posted By Boomholzer:
small chicks and men with thick winter clothes on dig it.

davkenrem,
Can you adjust the butt plate in the field? Please describe the mechanism.

www.ar15.com/members/albums/Boomholzer%2FARshort%2EJPG



Ditto what forest said
Link Posted: 10/29/2002 11:20:44 AM EDT
davkenrem, how much does that weigh? If not known, is it heavier than an A2 stock? Thanks.....Chad
Link Posted: 10/29/2002 1:40:52 PM EDT

Originally Posted By CRS188:
davkenrem, how much does that weigh? If not known, is it heavier than an A2 stock? Thanks.....Chad


At 28oz it weighs 3.5oz more than an A2 stock.

Then agains since there is no provision for a cleaning kit you'll get off a bit lighter in the finished rifle .

Its all covered here: groups.msn.com/TheMarylandAR15ShootersSite/stocks.msnw
Link Posted: 10/29/2002 1:49:42 PM EDT
[Last Edit: 10/29/2002 2:20:55 PM EDT by Redleg155]
My little 9mm RR/Bushy works great. At 31" total it is pretty compact. I added a 1" DPMS spacer to get a comfortable fit. The stock without a spacer was way too small.
Approx 8" in length.


Here is the RR 9mm w/shorty stock (bottom pic) compared to a G1 and a SAR1 AK.


Good SHooting
RED
Link Posted: 10/29/2002 2:36:20 PM EDT
Thanks Forest, I have the "stocks" page in favorites, should' remembered it.....Chad
Top Top