Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/19/2017 7:27:10 PM
Posted: 8/10/2003 9:55:38 AM EDT
Just put my TA11 on my Colt flat top using a TA51 mount. I'm trying to bore sight it(approx.75 yds.) by removing the bolt carrier and looking down the barrel and then making my adjustments. It seems the evevation is nearly maxed out because I'm starting to feel some resistence when turning the knob. But it seems to still be a little low. I cant get to the range for a few days to really see what shes doing and I was woundering if anyone else has come across this problem.
Link Posted: 8/10/2003 10:41:43 AM EDT
[Last Edit: 8/10/2003 10:42:34 AM EDT by Duffy]
The TA11 is designed to be mounted on a carry handle, there'll be some elevation adjustments when mounted on a flat top. My TA01NSN never needed any, but then it's meant to go on a flat top. I had to sight in my TA11 at the range. Buy a Leupold boresighter, while it's not gonna get it precisely it will get it at least close. [img]www.brownells.com/Images/Products/526000041.jpg[/img] [url]www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=7796[/url]
Link Posted: 8/10/2003 10:49:00 AM EDT
Try sighting it at the range. Trijicon states that the ACOGs are adjusted at the factory for zero at 100yds. Both of my TA11's were within an inch at 50yds out of the box when mounted on Colt flattops with 16" bbl's.
Top Top