Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/9/2004 8:53:31 PM EST
Hey guys, im building a neutured CA-legal AR-15 from the following:
Pre-Ban Bushy M4 w/ flash suppressor
Bushy lower parts kit
Fab-Ten lower receiver
Mag-Pul M93A


Anyway i was putting it together today with no problems and then it came time to put the stock on. I started screwing it into the lower receiver and it got somewhat jammed so i didnt force it, ran my fingers over the threads and checked em all. Well now as i screw them in they'll go in 2 threads and just kind of come out, could this be a problem with either the receiver or the stock??? Im taking it to my neighbor who has done this kind of thing before and hoping for help but trying to get some here before...
~thanks in advance
Link Posted: 10/9/2004 9:36:35 PM EST
Are you putting the stock on the receiver dry or or you using a lube. You should use a lube on the threads. Grease works but make sure no graphite in grease. Use a moly based grease.
Link Posted: 10/9/2004 9:42:44 PM EST
i tried using the only amount htat i had but it wasnt a lot... it still seemed like it should have helped though
Top Top