Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/24/2017 4:44:23 PM
11/22/2017 10:05:29 PM
Posted: 9/17/2004 12:48:26 PM EST
How should I have made sure that my TriPower is straight from side-to-side in the ARMS mount? I just used a standard bubble level - is there a better way?

And: is a 1x optical sight still considered a "scope"?
Link Posted: 9/17/2004 1:04:38 PM EST
Unless your scope has a built-in BDC or external elevation & windage knobs designed to be used in the field (e.g. to dial elevation for long range), it does not really matter if the scope is rotated a little bit. So in your case, don't worry about it.



Link Posted: 9/17/2004 1:13:25 PM EST
Link Posted: 9/17/2004 1:16:49 PM EST
True, it does make zeroing it a little more complicated. But once that's done, it will never matter again.

A crooked scope with a BDC or external elevation knobs is terrible because using hold-over in the field will add windage.

-z
Link Posted: 9/17/2004 1:28:19 PM EST
I'm sure I got it straight - I was just wondering if there is a tool I can buy that was designed for it. I seem to remember something about them in my Leupold manual, but it was mounted by a gunsmith so I didn't have to mess with it.
Top Top