Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/30/2002 9:10:01 PM EST
Ok..I need a pic of a modified .223 hammer that will work with the RR 9mm upper. I've seen the bighammer.net pics but they aren't what I need. I need to see an actual .223 hammer that has been modified. I do have a RR 9mm Hammer, but the sear has lots of creep. My .223 hammer is much more acceptable, thus my reason to wanting to modify it.

So anyone with a pic of a modified .223 hammer please Email it to me or post.

Thanks
Red
Link Posted: 9/3/2002 9:53:20 AM EST
Buy a M-16 hammer, and cut the rear section off.
Link Posted: 9/6/2002 10:29:24 AM EST
Link Posted: 9/6/2002 11:47:52 AM EST
DRAWING MIGHT BE FOUND AT:

WWW.BIGGERHAMMER.COM

IF I REMEMBER RIGHT?
Link Posted: 9/6/2002 12:08:36 PM EST

Originally Posted By ma96782:
DRAWING MIGHT BE FOUND AT:

WWW.BIGGERHAMMER.COM

IF I REMEMBER RIGHT?




Originally Posted By Redleg155:
I've seen the bighammer.net pics but they aren't what I need.



Hmm?
Link Posted: 9/6/2002 2:50:44 PM EST
I've heard that the colt style 9mm gives off trigger slap. Is that due to the funky look'in hammer?
Link Posted: 9/6/2002 9:21:25 PM EST
Thanks for the pics and the information!

I tried modifying my AR hammer and then after a period of uncertainty I decided to have another look at my 9mm hammer. I ended up doing some very judicious polishing and ended up with a serviceable trigger. Very acceptable for a military trigger.

My original modification did not cut down the top of the hammer enough, so I had to break out the plastic spatula to push the hammer down so I could get the bolt to go back forward so I could disassemble the rifle. Oh well...It needs a little more grounded off, but that will end up being a rainy day project.

Now for my mag block and mags to get in...I hate being at the mercy of the Postman!!

Good SHooting
RED
Link Posted: 9/7/2002 8:24:42 AM EST

Originally Posted By ma96782:
DRAWING MIGHT BE FOUND AT:

WWW.BIGGERHAMMER.COM

IF I REMEMBER RIGHT?





close, it is actually, www.biggerhammer.net and you were correct there is a M16/AR15 hammer ID page.

-psywar
Link Posted: 9/11/2002 10:52:31 PM EST
Sorry, I was working off of my memory....................and that was many beers ago.
Top Top