Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/24/2005 4:13:32 PM EST
Anyone know the name and manufacturer of this rig being worn by Pat?

http://www.10-8forums.com/ubbthreads/postimages/12659-lc20.jpg

Not particularly interested in the holster, but would like to get my hands on the belt rig he's got on. Thanks in advance.
Link Posted: 12/24/2005 4:17:14 PM EST
[Last Edit: 12/24/2005 4:18:50 PM EST by Stickman]
Belt looks like Tactical Tailor to me, either that or they have one very similar.....
Link Posted: 12/24/2005 4:34:29 PM EST
[Last Edit: 12/24/2005 4:35:25 PM EST by GUNGUY1911]
Try this thread!
gandrtactical.com/forum/viewtopic.php?t=2627

I also think some info can be garnered from 10-8 Forums.
Link Posted: 12/24/2005 5:43:05 PM EST
http://www.blackwatergear.com/p-48-i-o-load-bearing-belt.aspx

At $75, they certainly aren't selling it cheap....
Link Posted: 12/24/2005 6:13:59 PM EST
Link Posted: 12/24/2005 6:18:50 PM EST
That was quick! Thanks fellas - the blackwater rig looks to be close enough, if not the exact one. I'll dig around a little more on 10-8 to see if I can get a better report on it.
Link Posted: 12/24/2005 6:33:35 PM EST
Any of them made in the US?
Link Posted: 12/24/2005 6:41:07 PM EST

Originally Posted By JC_:
Any of them made in the US?



Diamondback Tactical makes all their gear in the US
Link Posted: 12/25/2005 9:04:00 AM EST
DBT is top-shelf gear. I'd buy from them long before considering BHI as a source. I haven't used this belt because I'm waaaay too big for a small/medium, but you can rely on them for quality.
Link Posted: 12/25/2005 11:25:58 AM EST
that's the other issue i'm running into - size. i take about a 40-42 belt. small/medium isn't going to cut it for me.
Link Posted: 12/25/2005 12:17:03 PM EST
That is a belt I believe that was made by either Eagle Industries or Crye Industries. Pat gets a lot of cool prototype Kit to try out. I saw this last year in a class I took with him (I'm cool, cause I got to touch it...)
Link Posted: 12/25/2005 12:22:52 PM EST

Originally Posted By VaughnT:
DBT is top-shelf gear. I'd buy from them long before considering BHI as a source. I haven't used this belt because I'm waaaay too big for a small/medium, but you can rely on them for quality.




Originally posted by 1SFG:
that's the other issue i'm running into - size. i take about a 40-42 belt. small/medium isn't going to cut it for me.



At least you skinny guys can measure your belts in inches, I have matured so much I now use feet.


Link Posted: 12/26/2005 5:49:31 AM EST

Originally Posted By Harv24:
That is a belt I believe that was made by either Eagle Industries or Crye Industries. Pat gets a lot of cool prototype Kit to try out. I saw this last year in a class I took with him (I'm cool, cause I got to touch it...hr


Harv, I suspected Eagle given their ties to the 10-8 guys, but couldn't find it on their site. If it is proprietary, then perhaps they haven't brought it out to market yet, but the blackwater version looks close enough - now to see if it will fit.
Link Posted: 12/26/2005 7:39:58 AM EST
Actually, after rereading some 10-8 posts, I believe that is part of the Crye Armored Chassis system. and that is the Armored belt for it. But like you said, some of this stuff can be hard to find.
Link Posted: 12/26/2005 7:48:16 AM EST
Pat, that is one hell of an understatement!

damian@adcofirearms.com
Link Posted: 12/28/2005 6:01:03 AM EST
Link Posted: 1/8/2006 5:17:25 PM EST
more info on the crye armoured belt about halfway down this page:
www.militarymorons.com/gear/crye3.html
i've been using it for a while now and it's pretty nice.
cheers,
MM
Link Posted: 1/9/2006 4:26:34 AM EST
If only it were.....


A) avaiable to mere mortals....

b) affordable to mere mortals....
Top Top