Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/23/2005 12:17:10 PM EST
Which brake is best for controlling barrel rise?
Link Posted: 12/25/2005 9:48:20 PM EST
The JP tank brake.

JP rifles
Link Posted: 12/25/2005 10:45:33 PM EST
muzzle rise?


mstn/pri qc brake
Link Posted: 12/27/2005 3:43:01 AM EST
Link Posted: 12/27/2005 5:53:32 AM EST
All of the above and the regular JP brake and miculek brakes.
Link Posted: 12/30/2005 10:56:04 AM EST
On that subject...can anyone ID the brake on my DPMS Dissy? I'm thinking of replacing it with a Phantom (for purely cosmetic reasons), but if it's something that will give me better performance I would probably keep it.

http://www.pakieser.com/guns/dissybreak.JPG

http://www.pakieser.com/guns/dissybreak2.JPG
Link Posted: 12/31/2005 7:28:48 AM EST

Originally Posted By Pakieser:
On that subject...can anyone ID the brake on my DPMS Dissy? I'm thinking of replacing it with a Phantom (for purely cosmetic reasons), but if it's something that will give me better performance I would probably keep it.

www.pakieser.com/guns/dissybreak.JPG

www.pakieser.com/guns/dissybreak2.JPG



Sorry ... I'm unfamiliar with that.
Link Posted: 12/31/2005 11:07:23 AM EST
[Last Edit: 12/31/2005 11:07:51 AM EST by FlyingFive0]
Looks to be the Fabio Muzzle Stabilizer.
www.dpmsinc.com/10Browse.asp
Link Posted: 12/31/2005 2:42:28 PM EST
Thanks for your help.
Link Posted: 12/31/2005 4:22:05 PM EST
Iwould use an mgi or enendine buffer before a muzzle break because of the increased noise.
Link Posted: 12/31/2005 7:00:02 PM EST

Originally Posted By Lycanthrope:
The JP tank brake.

JP rifles




+1

I have Miculek, Bennie Cooley, MSTN, and the JP - JP tank brake wins easily - you just don't want to be on either side of it
Link Posted: 1/1/2006 5:05:28 AM EST
For those who have experience with them, how does the Miculek compare to the MSTN QC? The factors important to me are: quality in construciton/finish, bombproofness, effectiveness in reducing muzzle rize, noise, and overall size (i.e. do they look a little too big sitting on the end of a 14.5" barrel?).

Any opinions would be helpful. Currently I've got a Smith brake (the one that looks like a long A2 flash hider, NOT the funky looking one with all the holes in it), from Brownells that I'm happy with. Just looking to see if something might be a little better.

Thanks and Happy New Year!
Link Posted: 1/1/2006 12:12:02 PM EST
I've got the Miculek brake on the end of a 14.5" M4. It is very well machined and looks good. I don't notice any muzzle rise and very minimal recoil. However, it annoys people adjacent to me at the range.
Link Posted: 1/1/2006 5:55:25 PM EST
My Colt 6400C has a brake that resembles a Miculek brake and it's amazingly effective...but noisy.

If you're building a range gun and will *always* be wearing hearing protection when firing it, a brake is a great idea. The extra pressure and noise they redirect won't be a problem.

However...if you have any plans on using the rifle for home defense, you'd want to consider a regular flash hider if your state law allows.

I've fired M4 variants with regular flash suppressors and they're much easier on unprotected ears than any of the brake/compensator ones.

Again, only a consideration if the rifle is destined for use where hearing protection isn't practical.
Link Posted: 2/14/2006 7:41:05 PM EST
I am looking for a brake for a 13" bbl AC556- to cntrol muzzle rise.

Any suggestions?
Link Posted: 2/15/2006 4:17:45 AM EST
The Tank brake is the most effective but its not legal - except in open.

Tried the Mini Y from bushmaster & its the most obnoxious by far & not as effective.

Best brake? the Cooley comp available through JP.

I also hear good things about the TTi.
Link Posted: 2/15/2006 5:56:13 AM EST
I'm talking about putting this on a full auto MG. Not worried about legality for competition.
Link Posted: 2/15/2006 8:23:51 AM EST
A good suppressor.
Link Posted: 3/8/2006 11:23:04 AM EST
Has anyone tried the Tri-Nozzle Flash-Break from Stag?

http://www.stagarms.com/accessories.htm
Top Top