User Panel
Posted: 2/8/2017 8:41:32 PM EDT
Think we'll need some zip ties.
ETA: Some pics - Hate their logo, but it's the least expensive available trigger jig I'm familiar w/. It'll bolt right onto a Hera Arms thumbhole stock. Zip tie this on top: ETA: JsARCLIGHT graciously sold me his Hera thumbhole stock after his review here: http://www.ar15.com/forums/t_6_2/474219_HERA-Arms-CQR-stock-and-front-grip.html 12 March - tail trimming of jig complete, sample's .22" LR upper installed. Range tomorrow. 13 March - test fired multiple times w/o zip ties. 27 May - test fired multiple times using 5.56x45mm upper, still without zip ties. Brass ejects, bolt returns to battery. Video taken of 1st shot, will be a bit before I post the link - have a wedding to attend to. |
|
Needs pics .....and the hera stuff peaks my interest, especially in sbr form
|
|
I think I know where you're going with this. Makeshift bull pup... I've thought of it plenty.
|
|
|
|
|
|
|
Anyways, why not just get an 80? A little machine time and no zip ties required.
|
|
B/c when you take apart an AR made from an 80% receiver, you still have a firearm. When you cut the zipties on this, you now have a pile of parts - none of which is legally a firearm.
And there's no machine time on this. Ziptie, load, bang! |
|
I would at least drill a hole for the rear receiver pin.
Im not sure how well that stock will Work without a receiver extension. Might need to put a tube in it to keep everything lined up. |
|
Quoted:
B/c when you take apart an AR made from an 80% receiver, you still have a firearm. When you cut the zipties on this, you now have a pile of parts - none of which is legally a firearm. And there's no machine time on this. Ziptie, load, bang! View Quote I'm no lawyer, but from some of the pretzel logic they've employed in the past, I'm thinking that ATF could find something to consider the receiver if they wanted to, most likely either the trigger jig or the stock. Perhaps not before it was assembled, but if it could be proven ever to have been assembled, then whatever part they decided was the receiver might then be a receiver forever. |
|
Quoted:
B/c when you take apart an AR made from an 80% receiver, you still have a firearm. When you cut the zipties on this, you now have a pile of parts - none of which is legally a firearm. And there's no machine time on this. Ziptie, load, bang! View Quote Why not use those damn steel receivers? I like this idea. Will need to make a few holes in the jig for the zip ties. Very intriguing indeed. Theres a channel on YouTube of this kid making crudely slapped together pipe rifles and pistols, and he's using a trigger block from somewhere but i can't remember the name. Gotta watch a view videos, i only recall him mentioning it once, but uses it on alot of his grease gun style builds. Anyways, that trigger should work great, and be able to mount a different stock possibly. |
|
Quoted:
I'm no lawyer, but from some of the pretzel logic they've employed in the past, I'm thinking that ATF could find something to consider the receiver if they wanted to, most likely either the trigger jig or the stock. Perhaps not before it was assembled, but if it could be proven ever to have been assembled, then whatever part they decided was the receiver might then be a receiver forever. View Quote You can make whatever you want. Just not sell it or serialize it. Or possibly take it out in public, depending on local laws of course. Remember, you haven't committed a crime until proven do in the court of law |
|
Quoted:
I would at least drill a hole for the rear receiver pin. Im not sure how well that stock will Work without a receiver extension. Might need to put a tube in it to keep everything lined up. View Quote And the Hera stock has beautiful internal ribs that will hold 2 part epoxy perfectly. Absolutely you'll want a buffer tube. Drill a takedown pin hole in the jig if you like. |
|
Quoted:
I'm no lawyer, but from some of the pretzel logic they've employed in the past, I'm thinking that ATF could find something to consider the receiver if they wanted to, most likely either the trigger jig or the stock. Perhaps not before it was assembled, but if it could be proven ever to have been assembled, then whatever part they decided wIas the receiver might then be a receiver forever. View Quote |
|
Aside from the possible legality aspect, there are plenty of reasons why this wouldn't work. If you want to use zip ties to hold your pressure switches in place, fine. But using zip ties to hold operating parts that aren't even remotely close to self contained in place, yeah that's beyond dumb.
|
|
Quoted:
I suppose we'll have to try it then. View Quote The most surefire way to determine if an idea is dumb or not. It's just 5.7, so there's not gonna be a ton of pressure. Your hands and arms might get dirty or a little warm. But like someone else said, you need a buffer tube, buffer and spring. You might be able to mill out the trigger block, set the buffer tube in it and epoxy that way. Then epoxy the stock onto the tube. But would be a passion getting it apart if need be. I don't think it's dumb, i think it's weird, but kinda intuitive. |
|
Quoted: The most surefire way to determine if an idea is dumb or not.
It's just 5.7, so there's not gonna be a ton of pressure. Your hands and arms might get dirty or a little warm. But like someone else said, you need a buffer tube, buffer and spring. You might be able to mill out the trigger block, set the buffer tube in it and epoxy that way. Then epoxy the stock onto the tube. But would be a passion getting it apart if need be. I don't think it's dumb, i think it's weird, but kinda intuitive. View Quote 5.7x28mm probably does generate more than a ton of pressure on the bolt face. If we have the upper correctly aligned w/ the buffer tube, the action will cycle. Orion's Hammer got 3 shots out of his wooden AR lower before the bolt stuck in the misaligned buffer tube. I don't have a $700 5.7 AR upper, so once I get my hands on a trigger jig, I'll give this a shot - a single shot, that is - w/ the 7.62x39mm upper sample gave me. Unless he wants me to try it w/ the upper I gave him. If we can get a standard DI upper to eject and then close the bolt, I think we might have something here. I don't know when the 5.7 AR uppers 1st came out, but it's not the only upper that doesn't require a magwell in the lower. Some years back, there was a small Oklahoma company producing .45" ACP uppers that took side-fed Thompson mags. I don't believe they still have a website. The FightLite beltfed upper and the new 9x19mm beltfed upper clearly don't require a magwell, nor do the .50" BMG uppers - though I think the recoil on those would be a bit much for this application. A Can Cannon upper would be interesting to try on this as well. I absolutely agree w/ the folks that say we need a buffer tube, buffer, & spring - the Hera Arms thumbhole stock isn't set up to take a buffer & spring w/o a tube installed. You'll probably need about 3 hands to assemble this thing, as there won't be a buffer retention pin. |
|
I've got that jig and a 5.7 upper. It's a 7" upper so I won't be attempting this though.
Ive already paid my $200 penalty and put it on a standard AR lower anyways. |
|
Yeah, having a fixed stock and not knowing where to put the serial number would be a bit of a downer.
Would you mind taking some pics of your trigger jig underneath the rear of the lower? What I don't know is if the sides of the jig are the same height as a standard lower, how wide they are, etc. We might have to trim the sides a bit to get it to line up, or we might have to add some shims. |
|
You're expecting a zip tie to hold the upper in alignment with the buffer tube. That's where you will be sorely disappointed.
|
|
|
I am in...post pics
I do believe that one of the 9mm uppers you mentioned does need a magwell as the ejector is mounted in a block that goes in the magwell. Just FYI. I still like the plan. |
|
Quoted: I am in...post pics
I do believe that one of the 9mm uppers you mentioned does need a magwell as the ejector is mounted in a block that goes in the magwell. Just FYI. I still like the plan. View Quote No parts yet. This just popped into my head last night after I posted a pic of the trigger jig in another forum for a semi-auto STEN build someone was working on. I just recently picked up a used Hera thumbhole stock from a member here. I had previously thought about using a trigger jig on a thumbhole stock, but the magwell and forward takedown boss had eluded me. Then the 5.7 upper popped into my head - don't need a magwell. A 9x19mm upper, or any other upper that requires a magwell in the lower, is another challenge for another day. I've been tilting @ that windmill for awhile now. |
|
Quoted:
Quoted: You're expecting a zip tie to hold the upper in alignment with the buffer tube. That's where you will be sorely disappointed. I agree, it needs a rear pin. Not just a zip tie. The rear lug of the upper will have to fit in the rear slot of the trigger jig. If it's not wide enough, we'll have to widen it; if it's too wide, we can add shims - and maybe some bubblegum? I don't have a trigger jig in my hands yet, so let us percolate this in our minds a bit, and perhaps someone will come up w/ a better idea than zip ties. I'm already considering my old stand by - super glue. Perhaps one of our agricultural or aviation experts could clue us into wire tying? Maybe we use the screw holes on the front of the jig to rig something up to the front takedown boss of the upper. I view drilling a rear takedown pin hole as a last resort, as that will probably make the trigger jig not just a trigger jig, but a lower. That may be the only way it works, however. We'll have to see. jaqufrost just sent me an eBay link to a trigger jig that has the rear takedown pin. Even better. |
|
|
Yeah, I know, my house is filled with cast plastic lowers à la Boris.* I was only addressing backbencher's comment that it would not be a firearm before it was assembled or after it was disassembled again. I'm fairly sure that if the ATF noticed it had ever been assembled, one of their lawyers would come up with some exotic criteria to prove one or another part to be the legal receiver. Which isn't a problem for most purposes but perhaps is for some (travel through certain states, on certain Federal properties, etc.). * ETA: I don't mean to imply that my cast lowers look or meet specs nearly as well as Boris', because so far they don't, but the principle is sound, and I've lost track of how many test castings I've made, presumably all of them being legally receivers, even when they don't fit or work quite right. Quoted:
I don't have a $700 5.7 AR upper, so once I get my hands on a trigger jig, I'll give this a shot - a single shot, that is - w/ the 7.62x39mm upper sample gave me. Unless he wants me to try it w/ the upper I gave him. Great heavens, man, why wouldn't you first try it with the .22 upper? Just remind me to get it to you one of these weeks. |
|
Quoted: Great heavens, man, why wouldn't you first try it with the .22 upper? Just remind me to get it to you one of these weeks. View Quote Oh - had forgotten about it. That won't really test the buffer tube, however. I thought you were going to tell me to go big or go home. PappaSunrise on Weaponeer has suggested hose clamps instead of zip ties. A bit sturdier. |
|
Quoted:
Not just a zip tie. The rear lug of the upper will have to fit in the rear slot of the trigger jig. If it's not wide enough, we'll have to widen it; if it's too wide, we can add shims - and maybe some bubblegum? View Quote With just zip ties, or even hose clamps, every time the hammer strikes the firing pin it's going to push the entire upper forward. Any pressure on the upper, from holding the handguard or resting it on sandbags or a pack, etc. is going to push it out of alignment. Every time it recoils, it's going to get interesting. And it's time to give up on superglue, it doesn't belong anywhere near a firearm. |
|
Quoted:
You need to keep it lined up on all planes, not just horizontal. Even just having a rear pin isn't a great idea, but it's better than no pins at all. View Quote 2 hose clamps should do it. Or 3 for added assurance. I'm still curious how you plan on keeping the buffer tube straight. I wouldn't trust the stock to keep it dead nuts for the epoxy. Have a tig welder? |
|
Quoted:
2 hose clamps should do it. Or 3 for added assurance. I'm still curious how you plan on keeping the buffer tube straight. I wouldn't trust the stock to keep it dead nuts for the epoxy. Have a tig welder? View Quote View All Quotes View All Quotes Quoted:
Quoted: You need to keep it lined up on all planes, not just horizontal. Even just having a rear pin isn't a great idea, but it's better than no pins at all. 2 hose clamps should do it. Or 3 for added assurance. I'm still curious how you plan on keeping the buffer tube straight. I wouldn't trust the stock to keep it dead nuts for the epoxy. Have a tig welder? Nope. We'll try it w/ the .22" LR upper 1st, then the 7.62x39 upper. The first test will just be of the hammer alignment. The second test will be how well we aligned the buffer tube. Apparently, the Hera stock will take both mil-spec and commercial diameter tubes. I have both, so we'll see which one fits best. If epoxy proves necessary, I'll try that. If I get to the epoxy, I could use an actual lower & upper, and a 1" dia wood rod to align the buffer tube before the epoxy sets. Josh, I'm well aware the bolt carrier recoils into the buffer tube, so yes, it has to be closely aligned to perfect. That was the issue Orion's Hammer had w/ the Pine A.B.O.R.T.I.O.N. - his front pin boss had broken off from the wooden lower, so only the rear pin was holding the upper in place. He wasn't using zip ties, however. He did have his buffer tube wired in place, however, after his buffer tower boss broke. |
|
Quoted:
Oh - had forgotten about it. That won't really test the buffer tube, however. View Quote View All Quotes View All Quotes Best to start small and simple in case it turns out to be an especially bad idea. Quoted:
PappaSunrise on Weaponeer has suggested hose clamps instead of zip ties. A bit sturdier. That was going to be my suggestion too. Quoted:
With just zip ties, or even hose clamps, every time the hammer strikes the firing pin it's going to push the entire upper forward. Any pressure on the upper, from holding the handguard or resting it on sandbags or a pack, etc. is going to push it out of alignment. Every time it recoils, it's going to get interesting. The rear takedown pin should locate the upper to the trigger jig longitudinally and should locate the rear of the upper vertically. If needed, a shim at the front of the jig (where the rubber stop is now) could correct the vertical location if it the upper receiver were too low in the front. If the upper were too high in the front, a file should be able to fine tune it. Horizontal location of the front of the receiver is going to the the harder bit. Best low-tech solution thing I can think of off the top of my head is to clamp a block onto the front of the jig and slot and drill it to take the front takedown pin. For the lazy or drill-less, the block could instead be thinned down at the front to the width of the front takedown stud and clamped again. Not a lot of meat on that stud for a clamp to grab onto though. Quoted:
And it's time to give up on superglue, it doesn't belong anywhere near a firearm. Quoted for truth. |
|
Quoted: The rear takedown pin should locate the upper to the trigger jig longitudinally and should locate the rear of the upper vertically. If needed, a shim at the front of the jig (where the rubber stop is now) could correct the vertical location if it the upper receiver were too low in the front. If the upper were too high in the front, a file should be able to fine tune it.
Horizontal location of the front of the receiver is going to the the harder bit. Best low-tech solution thing I can think of off the top of my head is to clamp a block onto the front of the jig and slot and drill it to take the front takedown pin. For the lazy or drill-less, the block could instead be thinned down at the front to the width of the front takedown stud and clamped again. Not a lot of meat on that stud for a clamp to grab onto though. View Quote Keep in mind the AR 5.7 upper ejects downwards, through our non-existent magwell. If you're reaching the forward takedown pin, you've basically recreated the magwell - which I'm hardly opposed to, as then we can use any upper. I note that MGI's interchangeable magwells run $275 a pop - it's cheaper to cut up an existing AR lower than use their parts: http://www.mgi-military.com/store/index.php?product_id=26 If we used longer pins in the trigger and hammer, we could use bits from the Flat Spot - bolt the side plates onto the trigger jig. Attaching the magwell plates, which would give us the forward takedown pin boss, would require some attachment method, and for once I agree w/ you cats, superglue doesn't work on the Flat Spot lower, b/c I've tried it. Welding and brazing works - but then you might as well weld up the whole thing. Screwing it together might work, as well as riveting. I have not tried two-part epoxy for that, so that remains a possibility. |
|
^^^
Won't that defeat the purpose of using parts that cannot be determined firearm status by themselves? Would not easily be disassembled that way, but in theory should work. |
|
I think that none of the parts being a firearm by itself is a possible advantage of this - but it's not the defining advantage. I'd like a no mill, no weld, no 3-D print method of making a capable firearm - this would appear to be one such way. If I have to Dremel off the end of a trigger jig, or epoxy a buffer tube into a stock, I think that's easily done work that can be done by the average apartment-dweller. I'd prefer to not have to drill precisely-located holes - if we go that route, an 80% lower becomes the obvious answer.
|
|
Failed To Load Title |
|
View Quote Failed To Load Title Yes, open bolt .22" LR long guns will be quite a bit less expensive than this. |
|
Thanks again to jaqufrost, jig & pistol grip adapter ordered. To quote one of our famous shysters,"Soon."
|
|
Sample has supplied the .22" LR upper - we're just waiting on our eBayer to ship - already have the tracking number.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.