Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 10/31/2009 1:42:55 PM EST
I get to build a new bullet launcher and was wondering what you guys think... I have two choices for the 16" Midi - Upper that are in my price range.. LMT and or BCM (From Bravo Co.) I hear that BCM puts out a better upper? Also - if i roll with the BCM.. should i spring the extra 100 bones for the BFH (Barrell, Forged, Hammer)?

BCM Standard 16" Mid Length Upper Receiver Group = 425.00 (http://www.bravocompanyusa.com/BCM-16-Mid-Length-Upper-Receiver-Group-p/bcm-urg-mid-16.htm)


BCM BFH™ 16" Mid Length Upper Receiver Group = 525.00 (http://www.bravocompanyusa.com/BCM-BFH-16-Mid-Length-Upper-Receiver-Group-p/bcm-urg-mid-16%20bfh.htm)

Thanks in advance
Link Posted: 10/31/2009 1:43:57 PM EST
as far as i know, LMT dosen't make a 16" middy.

So BCM is your only choice.

Link Posted: 10/31/2009 2:03:49 PM EST
Ooops.. i mistyped... as i was looking primarily at the BCM. So its either the Mid-Length BCM or the M4 LMT. What say you.
Link Posted: 10/31/2009 2:14:49 PM EST
Originally Posted By WMurderface:
as far as i know, LMT dosen't make a 16" middy.

So BCM is your only choice.



....unless you want a mrp upper.
Link Posted: 10/31/2009 2:16:43 PM EST
I have both and I can say hands down that if I would have bought the BCM first I would only have one. Its that awesome. I love my BCM middy.
Link Posted: 10/31/2009 2:45:40 PM EST
BCM middy hands down. I like the midlength system better on a 16" barrel and I trust BCM's quality much more than LMT right now. Thankfully it looks like LMT is starting to get their shit back together

again though.
Link Posted: 10/31/2009 3:16:03 PM EST
I have both the BCM middy and the BCM 14.5" M4, they are both top notch uppers!
Link Posted: 10/31/2009 4:13:22 PM EST
Much thanks.. looks like i will be getting the BCM upper and BCM BCG.
Link Posted: 10/31/2009 9:59:47 PM EST
Originally Posted By sydeshowbob:
Much thanks.. looks like i will be getting the BCM upper and BCM BCG.


Good decision.
Link Posted: 11/1/2009 4:19:10 AM EST
You can't go wrong with either. My vote would be for the BCM standard middy because it's cheaper, you're not going to notice any difference if you were to pay more for the CHF barrel. Also BCM parks under the FSB and uses taper pins in the FSB which LMT does not. The middy for ME allows a grip further out front for better control of follow up shots.
Link Posted: 11/1/2009 4:23:25 AM EST
I have a 16" carbine LMT and it has been great.

I just ordered a BCM middy.

I celebrate diversity
Link Posted: 11/1/2009 5:27:44 AM EST
Both are considered great uppers.....you wont go wrong with either one
Link Posted: 11/4/2009 3:48:20 PM EST
whoot whoot..got by BCM gear delivered in 5 days... not bad turnaround... thanks guys.
Top Top