Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/18/2006 4:19:01 PM EST
What size vise do I need to hold the action block. I have my action block ordered but I do not know the dimensions of the block. I want to go ahead and get a vise so I will be ready to finish my build.
Any suggestions on a vise are welcome...

Link Posted: 3/18/2006 5:44:12 PM EST
My Brownell's upper receiver block is 2.5" thick in the section that fits in the vise.

Link Posted: 3/18/2006 6:08:48 PM EST
Thanks, Alpine

Link Posted: 3/19/2006 5:14:09 AM EST
A 4 to 5 inch vise should suffice for any of the various action blocks/methods. I have a 4". Bigger should equal stouter though.
Link Posted: 3/19/2006 7:11:49 AM EST
I have a 5" vise... but a 4" will do. The most important thing is that the vise is solidly mounted. My workbench is assembled with Simpson Strong-Tie Connectors. It is screwed to the wall. There are two layers of ply on the benchtop, with glue in between. The bench and vise do not move.
Link Posted: 3/19/2006 10:18:43 AM EST
I am using a 4inch with no problems that I got from Lowes.
Link Posted: 3/19/2006 10:57:01 AM EST
Thanks Guys,
Now I will ready when my block arrives.

Link Posted: 3/19/2006 12:15:52 PM EST
4" will do anything AR related that you need
Top Top