Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/10/2010 9:13:17 PM EST
Anyone use a Larue .750 gas block with a BCM SS410 18" barrel? When I slide it over the barrel it seems really loose. Does it tighten up right when installed? Hope this isn't a stupid question. This is my first complete build and I want it to be right. Thanks guys!
Link Posted: 9/11/2010 2:52:23 AM EST
Originally Posted By MIDGAPATRIOT:
Anyone use a Larue .750 gas block with a BCM SS410 18" barrel? When I slide it over the barrel it seems really loose. Does it tighten up right when installed? Hope this isn't a stupid question. This is my first complete build and I want it to be right. Thanks guys!


At the point where the port on the GB lines up with the port on the barrel, you should be able to turn the GB freely with your fingers but it's should not fall of the barrel under it's own weight.

At this point.


Hope this helps.

J

Link Posted: 9/11/2010 5:18:41 AM EST
Thanks for the info!
Link Posted: 9/11/2010 11:59:17 AM EST
Anyone else have any info?
Link Posted: 9/11/2010 1:04:32 PM EST
is the GB designed for the barrel profile?
Link Posted: 9/11/2010 1:20:02 PM EST
Originally Posted By Phil1988:
is the GB designed for the barrel profile?


Yep. According to BCM's website the barrel requires a .750 gas block.
Link Posted: 9/11/2010 1:48:57 PM EST
Originally Posted By MIDGAPATRIOT:
Originally Posted By Phil1988:
is the GB designed for the barrel profile?


Yep. According to BCM's website the barrel requires a .750 gas block.


Just screw that GB down, and you'll be fine. Some GB give more "slack" at the port, luckily the YHM unit happens to be just right for thet barrel.

J
Top Top