Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 10/15/2004 9:00:10 AM EST
How hard would it be to remove the front sight on my Bushy and replace with a flip up?
Link Posted: 10/15/2004 9:02:57 AM EST
EZ to do with the proper tools. Bushmaster's seem to give many people problems. I haven't had any problems with them yet.

FSB Removal
Link Posted: 10/15/2004 10:55:02 AM EST
Like He said EZ.

1st remove gas pin.
2nd remove gas tube from front sight
3-push out pins that hold front sight on
4 remove old sight
5-put new sight on
replace pins and handgaurds and finished
Link Posted: 10/15/2004 11:05:47 AM EST

Originally Posted By usagold:
Like He said EZ.

1st remove gas pin.
2nd remove gas tube from front sight
3-push HAMMER out pins that hold front sight on
4 remove old sight
5-put new sight on
replace pins and handgaurds and finished



Fixed, as it takes some force to get them out. If you pansy around with them, you'll mushroom them and never get them out.
Link Posted: 10/15/2004 11:33:33 AM EST

Originally Posted By mongo001:

Originally Posted By usagold:
Like He said EZ.

1st remove gas pin.
2nd remove gas tube from front sight
3-push SLEDGE-HAMMER out pins that hold front sight on
4 remove old sight
5-put new sight on
replace pins and handgaurds and finished



Fixed, as it takes some force to get them out. If you pansy around with them, you'll mushroom them and never get them out.



Now it's correct. Remember, it's a Bushmaster.

Top Top