Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/7/2003 6:56:41 PM EST
I was wondering if a light profile barrel can be fluted, or would that cause unintended disasterous consequences? Thanks for your feedback.
Link Posted: 12/7/2003 8:32:25 PM EST
Why would you want to, it's already lightweight? Fluting is best for heavy barrels that you want to lighten, or to have a barrel that's a little heavier and stiffer, but with a weight closer to light. It's best to treat flutes as fins on a barrel.
Link Posted: 12/8/2003 11:50:00 AM EST
Only H-Bar's or medium-weight barrels can be fluted. Vietnam-era "pencil" barrels and 16" carbine "superlight" barrels are as skinny as they can get and still safely handle the pressure that a 5.56 creates. Cutting flutes into these barrels would be dangerous. The same is true of 20" A2 profile and M4 barrels under the hand-guards; although, I have heard someone propose fluting a 20" A2 barrel IN FRONT OF the hand guards.
Link Posted: 12/8/2003 8:11:21 PM EST
Thanks for the comments. I'm just looking to shave ozs where I can.
Link Posted: 12/8/2003 8:19:37 PM EST
[Last Edit: 12/8/2003 8:20:01 PM EST by Green0]
Look at BM's Carbon-15 Ar's they have a special fluting that reduces about 1.5OZ that can be applied to pencil barrels. Not that the 1.5OZ is worth it.
Top Top