Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
PSA
Member Login

Site Notices
Posted: 3/11/2010 7:42:20 AM EDT
Will it work.  I have an M3 on a Larue mount.  Will the Eotech with eotech mount work with the Aimpoint or will it be offset.
Link Posted: 3/11/2010 7:56:38 AM EDT
The standard LaRue mount is setup to give you a lower 1/3 co-witness.  The FTS mount for EoTech should come with a 7mm riser either installed or in the box.  If you use the riser, it will line up just fine.  Without the riser, it won't line up.

I used the EoTech FTS mount with the 3X maginifer with the riser and had no problems lining up with a 553 EoTech which has the 7mm riser built into it as well.
Link Posted: 3/11/2010 8:07:28 AM EDT
Note that only the G23 (Gen 2) EOTech magnifier comes with a spacer mount. If you have a Gen 1, the magnifier will sit too low.
Link Posted: 3/11/2010 8:21:15 AM EDT
Nothing that can't be fixed with a small riser.
Link Posted: 3/11/2010 8:29:19 AM EDT
Is there a riser that raises it only .25"?  Anything more will be too high.
Top Top