Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 4/5/2006 2:00:53 PM EST
[Last Edit: 4/5/2006 7:40:53 PM EST by 92FS_26_M4]
What is the word on these uppers with a secondary micro gas block?

Do they run reliable?

Is it better than an LMT 10.5 with a Krink?

I am interested in semiauto operation only.
Link Posted: 4/5/2006 2:21:41 PM EST
Link Posted: 4/5/2006 7:30:06 PM EST
Link Posted: 4/5/2006 7:40:28 PM EST
[Last Edit: 4/5/2006 7:41:29 PM EST by JBowles]

Originally Posted By CMMG:

CMMG M2SG(Short Gas) advanced 10.3 upper.

The M2SG has a secondary gas block mounted behind the standard front sight base. Gas is diverted earlier than on a standard 10" barrel through a small gas port. Gas is then directed up, rearward and forward. The goal was to increase the reliability envelope and decrease wear.

The M2SG uses a standard gas tube with a 2nd gas hole drilled. Gas that goes forward moves into an expansion chamber created by the excess CAR gas tube. The gas travels forward and is diverted through the FSB and stops at the barrel(there is no hole drilled under A2 FSB) This dereases the initial pressure spike normally associated with the carrier unlocking.

The carrier is unlocked with a push rather than a slap. This will reduce the accelerated wear associated with standard shorty uppers.

With the gas port farther back the from the muzzle the residual pressure is longer than with a standard gas system making for an all around more reliable system.

Additional specs: Barrels are .840 diameter, chrome lined, 1/7, 4150, MP tested and 5.56 chambered.

Here is a vid of some of the testing we have done. (40mb)

We ran two tests using one full mag of 77gr, one full mag of 45gr and one 20 rd mag with 10 different types of ammo ranging from 45-77gr.

Here is a photo of the ammo we used for the test. While the ammo ran differently all ammo all functioned without incident.

Check out the Vidoes
Top Top