AR Sponsor
Posted: 6/24/2011 8:48:49 PM EDT
I want to remove the standard BB that was installed on my RRA lower and install a Raddlock "convertible" BB. How do I remove the standard BB from the lower? I cannot figure it out to save my life. TIA. 
|
|
You need a tool to unscrew the internal screw.
Hopefully there isn't any red loctite on it. You may be able to back the internal screw off enough with a mini screw driver to get a regular screwdriver on it to unscrew it the rest of the way. I made a tool out of a slotted screwdriver bit. I dremeled the middle of the blade away leaving two small ears so it looked like a litte two tined fork. That gave me quite a bit of leverage to get the screw off when put in a screw driver. Mine was only locked with blue loctite. If it has red loctite on it you will have to use a heat gun to break the bond. |
|
Quoted: You need a tool to unscrew the internal screw. Hopefully there isn't any red loctite on it. You may be able to back the internal screw off enough with a mini screw driver to get a regular screwdriver on it to unscrew it the rest of the way. I made a tool out of a slotted screwdriver bit. I dremeled the middle of the blade away leaving two small ears so it looked like a litte two tined fork. That gave me quite a bit of leverage to get the screw off when put in a screw driver. Mine was only locked with blue loctite. If it has red loctite on it you will have to use a heat gun to break the bond.  Move recently? |
|
Quoted:
Quoted:
You need a tool to unscrew the internal screw. Hopefully there isn't any red loctite on it. You may be able to back the internal screw off enough with a mini screw driver to get a regular screwdriver on it to unscrew it the rest of the way. I made a tool out of a slotted screwdriver bit. I dremeled the middle of the blade away leaving two small ears so it looked like a litte two tined fork. That gave me quite a bit of leverage to get the screw off when put in a screw driver. Mine was only locked with blue loctite. If it has red loctite on it you will have to use a heat gun to break the bond.
Move recently? I move every 2-3 years - see my tank for reference...  
I didn't want to register all of my "Assault Weapons" while in the PRK so I put bullet buttons on several of them. |
AR Sponsor