AR Sponsor
Posted: 11/21/2010 4:33:25 PM EDT
| I am getting bored with my A4 clone. I am thinking about taking my SS scope off my rarely used Remmy SPS Tactical and use the A4 clone as a bench shooter at about 100yds. The question I have is this: this is basically a no budget build as in I'm just switching parts/optics around, so can I expect MOA accuracy out of a 20'' RRA 1/9 Gov't profile barrel? I can't buy anything like a better trigger or FF handguards or anything, but I'm thinking of cutting the FSB down. 2 MOA at 100yds will be acceptable and this rifle will just be a range rifle. I'm most likely going to just be shooting WWC Q3131 and LC M855. |
|
Since RRA states 1 MOA with match ammo - I'm sure 2 moa with m855 is capable. If you are running a normal run-of-the-mill DPMS/RRA parts kit with crap trigger - I'd suggest at least dropping $75 on a decent RRA 2-stage or like. That should help out quite a bit.
|
AR Sponsor