Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 6/15/2007 12:33:48 PM EDT
I know Brownells carries this stuff, but what I want to know is, has any one used it? Also what kind of results did yall get. Not doing the receivers or anything, only the furniture.
Info, results, and pics of results would be appreciated.

Thanks
Link Posted: 6/15/2007 12:37:37 PM EDT
I've been using it for years and it's good stuff. Very tough and solvent resistant, but you need to be sure of two things:

1. The surface is thoroughly clean and degreased.
2. Allow several days for the finish to cure.

Link Posted: 6/15/2007 3:56:22 PM EDT
I did a AK kit with Dark Park and it has held up very well. Just be sure to follow the instruction about light coats and let it dry really well.

http://i116.photobucket.com/albums/o32/Matt_Mc99/100_0713.jpg
Link Posted: 6/15/2007 5:47:54 PM EDT
[Last Edit: 6/15/2007 5:48:24 PM EDT by MED-TAC]
Hmmm... what about mags? does it hold still from rubbing the mag well?
Link Posted: 6/15/2007 6:28:29 PM EDT
That area will show wear fairly quickly...but then, no spray-on finish will hold up for long in that area.
Link Posted: 6/15/2007 6:45:53 PM EDT
[Last Edit: 6/16/2007 6:19:23 AM EDT by MED-TAC]

Originally Posted By DRich:
That area will show wear fairly quickly...but then, no spray-on finish will hold up for long in that area.

I may just stick with black mag pul pmags then. I planning on either doing the furniture plus a few receiver parts (ie latches, buttons, switches, and maybe ejection port cover) OR doing the upper and lower receivers. Dont know how well itll work or if I need to try to find unfinished upper, lower, barrel...
Top Top