Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/24/2003 11:56:35 AM EST
I have a Preban Bushmaster with out the removable handle. I want to mount an Aimpoint on the Gun . What would I need to do this, Is there a set up that would allow me to still use my Iron sights if I had to? Any Help would be appreciated
Link Posted: 10/24/2003 1:14:35 PM EST
The ARMS #39A2PLUS and #22M68 would do the trick quite nicely. Eagle Firearms has great prices on them and extremely good service. Check them out at www.eaglefirearms.net
Link Posted: 10/24/2003 2:50:35 PM EST
This is how the M4 + M68 + #39A2Plus look: [url="http://www.hunt101.com/?p=66344&c=500&z=1"][img]http://www.hunt101.com/img/066344.jpg[/img][/url] -- Chuck
Link Posted: 10/24/2003 3:13:42 PM EST
That is a sweet looking set up. Would I need any spacers or would the handle mount and site mount be it?
Link Posted: 10/24/2003 3:56:32 PM EST
This is the standard USGI Aimpoint Quick Release (Rail Grabber) mount between the M68 and the #39A2Plus rail. Some folks prefer the ARMS #22M68, but I prefer the ability to remove the sight even when wearing gloves. The ARMS lever is a bit more compact. It's a tossup. No spacers are needed with this arrangement and either mount. A major benefit in this mount is the ability for the lens caps to open down. And positioning the maximum distance from the eye enables faster target acquisition and transition between targets. I've returned to this setup after trying flattops and the SIR System. KISS. -- Chuck
Link Posted: 10/24/2003 4:25:15 PM EST
IMHO this is the best way to mount an Aimpoint. ARMS throwlever mount w/cantilever extension [url="http://www.hunt101.com/?p=66363&c=500&z=1"][img]http://www.hunt101.com/img/066363.jpg[/img][/url]
Link Posted: 10/24/2003 6:15:23 PM EST
I concure, the ARMS #39 with the 22M68 is the way to go. very good shootin, Jack
Link Posted: 10/25/2003 5:21:39 AM EST
If you're [s]stuck with[/s] using a flattop then the cantalever mount will help push the sight forward and allow the caps to flip down, as will the ARMS "Swan Sleeve." The question here was about a standard upper receiver with permanent handle and neither of these devices will work on one. -- Chuck
Link Posted: 10/25/2003 9:04:04 AM EST
ARMS #39 ARMS #22M68 [img]http://home.nc.rr.com/blueshockey77/ar15.jpg[/img]
Link Posted: 10/25/2003 9:09:39 AM EST
Rotate the lens covers so they flip down and you're good to go! -- Chuck
Top Top