Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 10/6/2004 7:58:05 AM EDT
Ok you wouldn't think this would be too hard, but I had to bang mine on with a hammer.

Do they all fit this tightly, or is my upper out of spec?
Link Posted: 10/6/2004 8:19:28 AM EDT
Why are you banging on it? My slips right onto my Bushie M4. Are you sliding it onto the rear of the flat top or are you trying to put it on top like you would scope rings?
Link Posted: 10/6/2004 8:20:39 AM EDT
[Last Edit: 10/6/2004 8:21:10 AM EDT by Duke_of_Lawnchair]
Out of the two that I've had/have they were never that tight. Neither were the ones that I've helped install on my friends' uppers.

One of my shooting collegues has the #40 and it was just as cherry as the rest.

Just slide it on!

It COULD be your upper OR the #40 itself.

Have you tried different BUIS's on the receiver?

Try installing the #40 on someone else's upper as well.

-Jim
Link Posted: 10/6/2004 8:26:14 AM EDT
You have to take the crossbolt out first!!!

<­BR>






Seriously, I have never had an ARMS 40 be tight on an upper. What brand is it? Wasn't there some issue with early RRA uppers, incorrect rail height or something?
Link Posted: 10/6/2004 8:51:10 AM EDT
[Last Edit: 10/6/2004 8:52:20 AM EDT by NoVaGator]
Yup, sliding it on from the rear.
It's a Bushmaster upper.
Haven't tried a different BUIS.

It's on, but it's tighter than a nuns...\


edit...I should have said "tap on" not "bang on" A few soft taps did it.
Link Posted: 10/6/2004 8:57:34 AM EDT

edit...I should have said "tap on" not "bang on" A few soft taps did it.


Shiite amigo!!!

That's all you had to say!

I'm sure you'll be fine. The snug fit will help the loctite out.
Link Posted: 10/6/2004 9:47:28 AM EDT
[Last Edit: 10/6/2004 9:47:39 AM EDT by NoVaGator]
Ok ok ok ...it's somewhere between a tap and a bang.
Link Posted: 10/6/2004 9:58:47 AM EDT
man i didnt have to tap or bang none of my arms products onto my bushmsters! all slid onto upper
Link Posted: 10/6/2004 11:46:47 AM EDT
Bring it tonight and I'll take a look at it.
Link Posted: 10/6/2004 12:05:23 PM EDT

Originally Posted By M4arc:
Bring it tonight and I'll take a look at it.



Oh, it's on there good now. Loctite and all. It ain't coming off. I just hope I can zero it.
Link Posted: 10/6/2004 12:24:10 PM EDT

Originally Posted By NoVaGator:

Originally Posted By M4arc:
Bring it tonight and I'll take a look at it.



Oh, it's on there good now. Loctite and all. It ain't coming off. I just hope I can zero it.



If that thing starts hitting my target then we know you have a problem!
Link Posted: 10/7/2004 5:49:49 AM EDT
Update...it zeroed fine. My Aimpoint with the GGG Cantilever mount was damn near zeroed right out of the box!.
Link Posted: 10/7/2004 6:35:23 AM EDT

Originally Posted By NoVaGator:
Update...it zeroed fine. My Aimpoint with the GGG Cantilever mount was damn near zeroed right out of the box!.



Thanks for letting me have a go at it! Was it just me shooting right? I contribute it to a funky shooting position
Top Top