Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Page / 81
Link Posted: 11/23/2004 8:58:35 AM EST
Btt, because I was hopeing to see a xm-177 style 9mm upper in the bunch.  (a few of pics failed, so maybe there already is)

Is Oly the only place that makes these uppers?  Does anybody sell the 5.5" FH's in 9mm in case I just wanted to send a regular 16"bbl off to get cut?
Link Posted: 11/23/2004 9:19:21 AM EST
[Last Edit: 11/23/2004 9:19:46 AM EST by Hallmark_Ent]

Originally Posted By davidp14:
Btt, because I was hopeing to see a xm-177 style 9mm upper in the bunch.  (a few of pics failed, so maybe there already is)

Is Oly the only place that makes these uppers?  Does anybody sell the 5.5" FH's in 9mm in case I just wanted to send a regular 16"bbl off to get cut?



Working on a 9mm XM-177 project now (Colt type system), stay tuned.

Steve
Link Posted: 11/23/2004 9:38:44 AM EST
I am still slowly adding to it. I haven't had much time to do anyhting since the hurricane hit. Maybe I can do more after Christmas.

Before:


After:


Link Posted: 11/23/2004 9:39:39 AM EST

Originally Posted By Hallmark_Ent:
Working on a 9mm XM-177 project now (Colt type system), stay tuned.

Steve



email sent
Link Posted: 11/23/2004 10:40:35 PM EST
Beowolf, whats your setup?
Link Posted: 11/23/2004 10:51:07 PM EST
I'm going to have to get one of those 3-lug adapters.  Easier than buying a new barrel!
Link Posted: 11/24/2004 3:44:03 PM EST
if the pic works....(cant seem to remember how to do a pic post.....)

Colt 9mm
Gemtech Talon SD upper
11" Upper with XXX suppressor

just got done doing the Norell's moly-coat on the sunomi drums and XXX....

[http://onfinite.com/libraries/180966/217.jpg]
Link Posted: 11/24/2004 3:47:26 PM EST
Link Posted: 11/24/2004 3:48:43 PM EST
sheesh........i guess i need to figure out how to make the picture SMALLER........next time huh>>?

Link Posted: 11/24/2004 5:30:04 PM EST
[Last Edit: 11/24/2004 5:31:41 PM EST by Sidx]
Originally Posted By Burnsome-:




Who makes the 9mm suppressed upper ? Is that a SBR ? (btw: very nice)

Link Posted: 11/24/2004 5:51:52 PM EST
thanks for resizing Sidx - how'd ya do that anyway?

the SBR hosts the Gemtech Talon SD 9mm integrally suppressed upper.  the can on the bottom is the American Manufacture Triple-X.  I use the Triple-X for my .223 upper as well....originally it was for my .223, but i had Mike at AA bore it out so i could use on my 9 as well..... works well for me and keeps 147gr winchester white box ammo subsonic....
Link Posted: 11/24/2004 10:58:01 PM EST
TS Inc.

TS Inc. will produce XM177 moderators in 9mm on a custom basis. Price is $75.

Sammy
Link Posted: 11/30/2004 9:57:02 PM EST
keep this puppy on top!
Link Posted: 11/30/2004 10:04:07 PM EST
Link Posted: 11/30/2004 10:59:31 PM EST
Another couple of pics of the same weapon I had posted earlier.

Dan



Link Posted: 12/2/2004 10:27:07 AM EST
My wife's 9mm (top one) with an Eotech and a $30 BSA laser for fun.

Link Posted: 12/2/2004 11:31:42 PM EST
Completed SBR build:


And posing with my other 9mm shorty. The AR is actually a little shorter and quite a bit lighter, but the MAC has the go-fast switch.
Link Posted: 12/3/2004 2:38:53 AM EST
A more better pic of my SBRed Colt.

Link Posted: 12/7/2004 8:54:39 AM EST
Tagged.
Link Posted: 12/8/2004 4:26:51 AM EST
[Last Edit: 12/8/2004 4:27:38 AM EST by Colt_SBR]
I got a box stock L.E.O. Colt 9mm right after the sunset.  I like it.  

Wish I could have gotten one sooner with the evil features.  Now I have an evil 9mm Colt.  

My only gripe is the cost of the Colt mags.  I like the hold open so I have  to stick with the Colt mags.  I've got two 32 rounders.  Would like a couple of 20's but not at the highway robber's prices.  

Guess I'll have to get a couple of Uzi mags.  

Colt_SBR  
Link Posted: 12/8/2004 7:12:18 AM EST

Originally Posted By Colt_SBR:
My only gripe is the cost of the Colt mags.  I like the hold open so I have  to stick with the Colt mags.  I've got two 32 rounders.  Would like a couple of 20's but not at the highway robber's prices.  

Guess I'll have to get a couple of Uzi mags.  

Colt_SBR  



Check out this thread:
www.ar15.com/forums/topic.html?b=3&f=15&t=207682

They re-engineered the magazine, and it has been reported to activate the bolt stop.

AND THEY'RE CHEAP!!!
Link Posted: 12/8/2004 7:36:31 AM EST
[Last Edit: 8/18/2006 2:30:47 PM EST by mjohn3006]
Link Posted: 12/8/2004 7:37:16 AM EST
Tagged for more sweet pics.

I am waiting on my Colt 6450.  
Link Posted: 12/8/2004 7:52:57 AM EST
Link Posted: 12/8/2004 9:52:27 AM EST

Originally Posted By Rabbit9:

Originally Posted By Colt_SBR:
My only gripe is the cost of the Colt mags.  I like the hold open so I have  to stick with the Colt mags.  I've got two 32 rounders.  Would like a couple of 20's but not at the highway robber's prices.  

Guess I'll have to get a couple of Uzi mags.  

Colt_SBR  



Check out this thread:
www.ar15.com/forums/topic.html?b=3&f=15&t=207682  

They re-engineered the magazine, and it has been reported to activate the bolt stop.

AND THEY'RE CHEAP!!!

 

Rabbit9  

Thanks for the heads up.  

My brother was at this weeks big show in Az.  He told me about these mags.  He said they looked cheep but if they work I’d be interested.  

Colt_SBR  

Link Posted: 12/9/2004 5:20:21 PM EST
[Last Edit: 12/9/2004 5:22:33 PM EST by Hitman]
Colt Lower
Colt A1 Upper
Colt 1 piece mag block
Colt mags
Colt side sling adapter
KAC RAS and grip
OKO electronic sight with protective cover
MFI fake can (to cover the long 16" barrel)
Crane clone stock


Link Posted: 12/9/2004 5:34:26 PM EST
[Last Edit: 12/18/2004 10:25:12 AM EST by Rabbit9]

Originally Posted By Hitman:
Colt Lower
Colt A1 Upper
Colt 1 piece mag block
Colt mags
Colt side sling adapter
KAC RAS and grip
OKO electronic sight with protective cover
MFI fake can (to cover the long 16" barrel)
Crane clone stock

www.photobucket.com/albums/v397/ar15hitman/74d6daa8.jpg



The MFI fake suppressor looks good on your barrel.  Is it AIRSOFT?
Link Posted: 12/9/2004 5:39:58 PM EST
Nice pics, keep it up.
Link Posted: 12/9/2004 5:47:05 PM EST

Originally Posted By Rabbit9:

Originally Posted By Hitman:
Colt Lower
Colt A1 Upper
Colt 1 piece mag block
Colt mags
Colt side sling adapter
KAC RAS and grip
OKO electronic sight with protective cover
MFI fake can (to cover the long 16" barrel)
Crane clone stock

www.photobucket.com/albums/v397/ar15hitman/74d6daa8.jpg



I the MFI fake suppressor looks good on your barrel.  Is it AIRSOFT?



The manufacturer is MFI. They make accessories for airsoft and real guns.
www.mfiap.com/airsoft/acce/m4-fake.htm


They also make a new Socom style one too.


Link Posted: 12/10/2004 8:37:55 AM EST
[Last Edit: 12/21/2004 8:30:26 AM EST by davidp14]
Future home of my 9mmAR:
Not much to look at yet, but its a start..........

Getting closer.
Link Posted: 12/12/2004 1:57:18 AM EST
[Last Edit: 9/15/2010 7:41:41 PM EST by cwm1150]
Here is my All Colt 9mm AR15 ex-LEO gun from KY imports, only cost $450 with 3 32 rounds mags

Link Posted: 12/12/2004 2:35:44 AM EST

Originally Posted By Hitman:
Colt Lower
Colt A1 Upper
Colt 1 piece mag block
Colt mags
Colt side sling adapter
KAC RAS and grip
OKO electronic sight with protective cover
MFI fake can (to cover the long 16" barrel)
Crane clone stock

www.photobucket.com/albums/v397/ar15hitman/74d6daa8.jpg



Hitman,

Does the MFI fake supressor actually fit over the flash hider, or did you have to remove it?  if you remove it,does the MFI screw onto the barrel threas, or have you installed a thread protector and the MFI mounts with set screws?  

Dawg
Link Posted: 12/12/2004 7:14:29 PM EST

Originally Posted By Dawg180:
Hitman,

Does the MFI fake supressor actually fit over the flash hider, or did you have to remove it?  if you remove it,does the MFI screw onto the barrel threas, or have you installed a thread protector and the MFI mounts with set screws?  

Dawg



You get an adapter that the fake suppressor screws on to. Make sure you get the correct adapter for the 9mm threads.  You need to unscrew the 9mm flash suppressor then the adapter goes over the barrel's threads. The fake suppressor has set screws that you tighten onto the adapter. You have the option of tightening the other set screws all around the fake suppressor to give it a more solid hold on the barrel. Hoever it may make some cosmetic marks on the barrel if you do.

Hitman
Link Posted: 12/18/2004 8:43:16 AM EST
[Last Edit: 12/18/2004 8:44:01 AM EST by ARthuri]
Here´s my SBR
Bushmaster Lower receiver
RRA telestock
Upper (cerro forge)
Barrel is from Suomi m31 submachine gun
Uzi magazines
CAR handguards
RRA magazine adapter and bolt
Aimpoint COMPML XD
Aimpoint QRP -mount
ARMS #40
ErgoGrip picatinny rail under handguards
ErgoGrip pistol grip with Hogue
Knight`s  vertigal grip

Now i only need some curved mags..  PM me if you have them for sale. http://www.hunt101.com/img/231731.jpg
Link Posted: 12/19/2004 12:38:21 PM EST
[Last Edit: 12/19/2004 12:39:02 PM EST by M4A2_L073754]
More eeeeevil goodies from Finland...

MN
Link Posted: 12/25/2004 9:34:52 PM EST
Here is my baby


Link Posted: 12/25/2004 11:25:19 PM EST
Damn that is sweet!!!


Originally Posted By M4A2_L073754:
More eeeeevil goodies from Finland...
www.sniperworld.com/ar/9mm/ar15_sd_proto.jpg
MN

Link Posted: 12/27/2004 9:32:05 PM EST
[Last Edit: 12/27/2004 9:32:44 PM EST by Aim4MyHead]
Oly 9mm lower, custom colt upper.




J
Link Posted: 12/28/2004 5:34:42 AM EST
dam the more photos you guys post the more ideas I get, the more ideas I get the more money it cost me, I really need to stay away from this board, it is a really bad illness
Link Posted: 12/29/2004 6:28:57 PM EST
[Last Edit: 9/4/2006 8:49:14 AM EST by dtarbox]
The latest addition to the family.

***** image removed ******


Link Posted: 12/31/2004 7:18:02 PM EST
Link Posted: 12/31/2004 9:58:41 PM EST
[Last Edit: 1/1/2005 10:31:01 PM EST by YardDogOne]
Colt
Colt
Colt
Lauer lower

Link Posted: 12/31/2004 11:19:19 PM EST
[Last Edit: 12/31/2004 11:20:00 PM EST by Czexybeast]
The more I see them, the more I want one in a shorty flavor. Damn, I just put a USP .45 C on layaway. I'm gonna need to start pimping myself out soon. h.gif
Link Posted: 1/3/2005 12:13:09 AM EST

Originally Posted By M4-TUNA:
OK ONE MORE TIME. Nice guns guys. U lucky BASTARDS with the AUTOShref=img.photobucket.com/albums/v370/M4-TUNA/DSC00185.jpg



Great rifle !!!

Let's have some specifics - is that a variant of the Magpul M93A butt stock?
Who's upper / lower?
Who's Forgrip?

(Drool)
Link Posted: 1/3/2005 5:19:31 PM EST
[Last Edit: 1/9/2005 7:38:45 AM EST by rockytherotty]
Just got mine done last night.  I'm still waiting for a couple of mags though  
Stag lower, RRA LPK, Fulton Armory M16 "slickside" upper, Colt 9mm UPK, RRA bolt carrier assembly, Colt mag block, RRA 16" barrel w/break, RRA OD Green furniture.

Link Posted: 1/8/2005 2:56:54 PM EST
[Last Edit: 1/8/2005 4:07:25 PM EST by Txnrcr]
My new AR15/9 "Build".
RRA 9mm A4 CAR Upper
RRA Complete lower with 6-position stock
RRA 9mm Hammer
RRA 9mm Buffer
Hahn bottom loading mag block
Colt 32 rnd 9mm mag
ARMS #40 BUIS
Eotech 511 rev. F

http://img.photobucket.com/albums/v230/txnrcrc/9mmAR1.jpg
http://img.photobucket.com/albums/v230/txnrcrc/9mmAR2.jpg

Range Report:
Only one trip to the indoor range so far.
50 rnds of Winchester 115 grn Value Pack.
100% function, no failures or jams.
Last round BHO - 5 out of 5, so far so good.
Seems to be very accurate at 25 yrds, but I was testing function more than accuracy this range trip.
Very fun carbine to shoot, being able to shoot an AR indoors - priceless!

Big thanks to AR15com and its members for the vast amount of knowledge on this site, and to the Industry partners for making this project happen.
Link Posted: 1/9/2005 2:19:13 AM EST


Mega 9mm Lower
Oly Arms "Transition" Upper (started life as a Pre-ban, but was sold during the start of the ban, so was chopped)
CQB MOUT sling

btw, if anyone knows any information about the "Straight Sided Delta Ring" please shoot me a PM or email.

Thanks!

-Jason
Link Posted: 1/15/2005 8:56:01 PM EST
[Last Edit: 1/15/2005 8:57:19 PM EST by M4-TUNA]

Originally Posted By double_trouble_2003:

Originally Posted By M4-TUNA:
OK ONE MORE TIME. Nice guns guys. U lucky BASTARDS with the AUTOS img.photobucket.com/albums/v370/M4-TUNA/DSC00185.jpg



Great rifle !!!

Let's have some specifics - is that a variant of the Magpul M93A butt stock?
Who's upper / lower?
Who's Forgrip?

(Drool)

RRA gun top and bottom and block, Vltor stock with Arms 58, Phatom FS milled out , I hade my barrel threaded for the 223. I am not worring about putting another FS on it. TD Vgrip. Aimpoint ML2 with Arms mount
Link Posted: 1/16/2005 1:51:26 AM EST
[Last Edit: 1/16/2005 1:59:55 AM EST by mikes8750]
This is my baby!

ASA 9mm upper receiver
Stinger Arms lower
Olympic arms "Firsh" quad rail free float Handguards
Tacpoint optic
ASA mag block
ASA flip-up front and rear sights
Promag 32rd magazine
Six position stock
GG&G single point connection plate
CQB single point sling
Euro grip  

Link Posted: 1/16/2005 6:58:58 PM EST
tag
Page / 81
Top Top