AR Sponsor
|
endofdays :: the front sling swivel & rivet are on the way , LMK when you get them ..ken Originally Posted By endofdays:
Still have a bunch of a2 grips and trigger guards Looking for a sling loop with hardware for an a2 fsp |
" You Don't Always Need to Have Sex with Your Wife / X Wife, to Get a Good Fuckin !!!!
|
I got a rear Magpul flip sight -Taken shipping today, fixed rear Troy sight - taken shipping today ,a Magpul hand stop, brown gi 1911 grips, and a 1in riser for an optic. Just started my first build and would love to help someone out doing the same! https://imgur.com/gallery/0RMFDaB Here is what I have so far ! |
|
Originally Posted By PursuitSS:
Here are the rules as set forth by Site Staff.... 1: If you have something you don't need and wouldn't mind passing it on,post it. 2:This thread is ABSOLUTELY NOT for Trades or selling,you are donating to another member to help 'em out. 3: The shipper pays the shipping, unless the Receiver lives outside CONUS, or it's agreed upon by both parties to do something different. 4: Keep ALL transactions legal and above board. All transactions are to be conducted within this thread, and NO IM/Email transactions other than shipping information should take place. 5:The person receiving must post an "I'll take it" in the thread. This keeps the back door snipers out of the picture, and no one will get upset over a lost opportunity. 6: If you do take something, please offer something up that others may want. This helps others get stuff too. 7: Don't be greedy and definitely don't start selling the stuff on the EE. If it's determined you're taking free stuff to profit, you will lose your posting privileges. 8: Since these aren't EE transactions, any problems should be dealt with here, and not in the EE. |
|
Originally Posted By stolenheron:
@Brushwag45 you may want to use the quote feature... Originally Posted By Brushwag45:
New here how do I make a post on this thread I have some stuff I don’t need 
|
Code word is Yellow Umbrella.
"All welchers should be removed from the EE"-Aimless
"All welchers should be removed from the EE"-Aimless
|
Originally Posted By GMG3TROUTT:
I have a black magpul if anyone needs one. http://imgur.com/gallery/aUOBK8m |
|
Originally Posted By Tigwelder1971: Located here: https://www.AR15.Com/media/mediaFiles/416992/Screenshot_20190307-153229-869443.jpg |
|
Originally Posted By Brushwag45:
I got a rear Magpul flip sight , fixed rear Troy sight ,and a Magpul hand stop. Just started my first build and would love to help someone out doing the same! 
I have an assortment of small parts, like extra detents and springs. The things that somehow disappear during a build. Shoot me a message and I’ll see if I got it. |
|
Originally Posted By Ed_Victory: I can use the Troy if it’s still available.
I have an assortment of small parts, like extra detents and springs. The things that somehow disappear during a build. Shoot me a message and I’ll see if I got it. |
|
Originally Posted By Brushwag45:
I got a rear Magpul flip sight , fixed rear Troy sight ,and a Magpul hand stop. Just started my first build and would love to help someone out doing the same! |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
Originally Posted By TheOTHERmaninblack: I've got a project could use the magpul rear sight. [email protected] |
|
Originally Posted By Ed_Victory: I can use the Troy if it’s still available.
I have an assortment of small parts, like extra detents and springs. The things that somehow disappear during a build. Shoot me a message and I’ll see if I got it. |
|
Originally Posted By Brushwag45:
I would like this I have a magpul hand stop and rail covers to offer up 
|
|
Originally Posted By Ed_Victory: I can use the Troy if it’s still available.
I have an assortment of small parts, like extra detents and springs. The things that somehow disappear during a build. Shoot me a message and I’ll see if I got it. |
|
Originally Posted By brainiak4431:
I could use the hand stop, rail covers, and riser if they're still available. I'll send you an email. I have a 1" flashlight offset mount for picatinny rail, similar to this, up for grabs. https://images-na.ssl-images-amazon.com/images/I/61UzyhNI5nL._SX425_.jpg |
|
Originally Posted By Ed_Victory: I can use the Troy if it’s still available.
I have an assortment of small parts, like extra detents and springs. The things that somehow disappear during a build. Shoot me a message and I’ll see if I got it. |
|
Originally Posted By Brushwag45:
Did you receive the package ? Originally Posted By Brushwag45:
Originally Posted By TheOTHERmaninblack: I've got a project could use the magpul rear sight. ETA: Tracking shows it as out for delivery, so I should see it by end of day. ETA2: Package arrived while I was at work, and waiting for me when I got home. Thanks! |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
Originally Posted By TheOTHERmaninblack: Not yet, but this whole end of the state was shut down Wednesday and part of yesterday because of snow, so it's probably delayed. ETA: Tracking shows it as out for delivery, so I should see it by end of day. ETA2: Package arrived while I was at work, and waiting for me when I got home. Thanks! |
If anyone has a few extra safety and takedown detent springs, that would be awesome. I may have kinda managed to bend the ones I have pretty well by accident. 
As for offering: Looks like the following are claimed. I'll try to get them in the mail in the next few days. Stock has been temporarily struck, as I realized shipping that might be a pain in the ass. Will repost once I get it figured. PM's returned to the below. -BCM Grip to @303_enfield PM returned. -Warne scope base to @stolenheron -MOE grip to @samIam007 Due to travels, there may be a delay in shipping though. 
|
Atom bomb baby, little atom bomb, I want her in my wigwam.
She's just the way I want her to be, A million times hotter than TNT...
She's just the way I want her to be, A million times hotter than TNT...
|
I'd like the stock an the BCM grip please.
I'll send you some take down springs
Originally Posted By NorthPolar:
If anyone has a few extra safety and takedown detent springs, that would be awesome. I may have kinda managed to bend the ones I have pretty well by accident.
As for offering: -OD green Magpul FCS stock with regular and extra long buttpads and QD socket. It does have some leftover OD green alumahyde on it, so there is a little color mismatching. Temps are too cold currently to give it a good soak in citristrip to clean it currently. It does come with both 'caps' to allow for QD/ASAP plate use. Fits milspec buffer tubes. -Warne RAMP 1" scope mount. Functionally perfect, cosmetically ugly. Same OD green alumahyde as above. I got 90% of it off by hand, but it needs a good soak and scrub to be 100% off. -MOE grip (black) -BCM grip (OD alumahyde again) Due to travels, there may be a delay in shipping though. https://i.imgur.com/1yR0V8L.jpg https://i.imgur.com/ntyiubr.jpg https://i.imgur.com/Kwu7SO1.jpg?1 |
LaRue made "ME" do it!
|
Originally Posted By NorthPolar:
If anyone has a few extra safety and takedown detent springs, that would be awesome. I may have kinda managed to bend the ones I have pretty well by accident.
As for offering: -OD green Magpul FCS stock with regular and extra long buttpads and QD socket. It does have some leftover OD green alumahyde on it, so there is a little color mismatching. Temps are too cold currently to give it a good soak in citristrip to clean it currently. It does come with both 'caps' to allow for QD/ASAP plate use. Fits milspec buffer tubes. -Warne RAMP 1" scope mount. Functionally perfect, cosmetically ugly. Same OD green alumahyde as above. I got 90% of it off by hand, but it needs a good soak and scrub to be 100% off. -MOE grip (black) -BCM grip (OD alumahyde again) Due to travels, there may be a delay in shipping though. https://i.imgur.com/1yR0V8L.jpg https://i.imgur.com/ntyiubr.jpg https://i.imgur.com/Kwu7SO1.jpg?1 I will put up: -a used standard carbine buffer spring off of a Daniel Defense lower -one 10 pack of 1.25" "ranger bands" -these work well for skinny VFG and pressure pad combos (like KAC broomsticks and old M952 pressure pads as seen in photo). I recommend 2 bands per pressure pad/vfg combo, so this one pack will cover you for 5 rifles. (See photo) 
|
|
I’ll take the black grip. Still have a charging handle to offer.
Originally Posted By NorthPolar:
If anyone has a few extra safety and takedown detent springs, that would be awesome. I may have kinda managed to bend the ones I have pretty well by accident.
As for offering: -OD green Magpul FCS stock with regular and extra long buttpads and QD socket. It does have some leftover OD green alumahyde on it, so there is a little color mismatching. Temps are too cold currently to give it a good soak in citristrip to clean it currently. It does come with both 'caps' to allow for QD/ASAP plate use. Fits milspec buffer tubes. -Warne RAMP 1" scope mount. Functionally perfect, cosmetically ugly. Same OD green alumahyde as above. I got 90% of it off by hand, but it needs a good soak and scrub to be 100% off. -MOE grip (black) -BCM grip (OD alumahyde again) Due to travels, there may be a delay in shipping though. https://i.imgur.com/1yR0V8L.jpg https://i.imgur.com/ntyiubr.jpg https://i.imgur.com/Kwu7SO1.jpg?1 |
| PM's returned to guys wanting the scope rings and grips. Stock temporarily pulled so I can try to figure out how to ship it cheaper than a medium flat rate. |
Atom bomb baby, little atom bomb, I want her in my wigwam.
She's just the way I want her to be, A million times hotter than TNT...
She's just the way I want her to be, A million times hotter than TNT...
|
Originally Posted By NorthPolar:
PM's returned to guys wanting the scope rings and grips. Stock temporarily pulled so I can try to figure out how to ship it cheaper than a medium flat rate. |
|
Originally Posted By stolenheron: I will take the scope mount. give me a few minutes to toss up some stuff. I will put up: -a used standard carbine buffer spring off of a Daniel Defense lower -one 10 pack of 1.25" "ranger bands" -these work well for skinny VFG and pressure pad combos (like KAC broomsticks and old M952 pressure pads as seen in photo). I recommend 2 bands per pressure pad/vfg combo, so this one pack will cover you for 5 rifles. (See photo) https://scontent.fmem1-1.fna.fbcdn.net/v/t1.15752-9/50524915_283919798959704_2738751325826187264_n.jpg?_nc_cat=105&_nc_eui2=AeGoYbtD_-QqW8uPSSHuiBefalhDbJus-AZx9k0xCUrkHe2ikK5SWF9-NA9w6dg2Bv9ZidprsUpkF1-ZoBeYS6q9_zMgtb3102MQjkj4Vy9Q1g&_nc_ht=scontent.fmem1-1.fna&oh=a19f86872352b73e0c0e73f6dd60f5ec&oe=5CC85E66 I will got through my parts bin tonight and put some stuff up. |
|
Originally Posted By PKT1106: I will take the buffer spring. Pm incoming. I will got through my parts bin tonight and put some stuff up. 10 pack of ranger bands (for VFGs) from my original post is still available. |
|
Originally Posted By Brushwag45:
https://imagizer.imageshack.com/v2/320xq90/r/922/zWncGf.jpg. Up for grabs Edit: I would like the grips too please! |
|
Originally Posted By PKT1106:
Everything in the image except 1 end plate. http://i.imgur.com/sdcI727.jpg Lots of spare parts, one of the FCGs needs a spring, a grip needs a washer. The gas block is .75". Trigger guards need pins. |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
Originally Posted By TheOTHERmaninblack:
I could use one of the endplates. Originally Posted By TheOTHERmaninblack:
Originally Posted By PKT1106:
Everything in the image except 1 end plate. http://i.imgur.com/sdcI727.jpg Lots of spare parts, one of the FCGs needs a spring, a grip needs a washer. The gas block is .75". Trigger guards need pins. |
AR Sponsor