AR Sponsor
|
Originally Posted By JoeBud:
Sorry to do this, but I am offering up my Team Member giveaway prize. I just won’t put it to use, so thought I would pass it to someone that will. I will only pass it along to a Team Member. Mission First Tactical Battlelink Minimalist Stock, black and Mil-Spec. |
|
Originally Posted By coloradocopper:
I’ve got one for you. It was installed on a rifle for a few months and then Taken off. Has a bit of wear but in great condition . PM me if you want it. Originally Posted By coloradocopper:
Originally Posted By Talons:
anyone have a flat back commercial buffer tube? PM me if you want it. |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
I know it ain't much but, I have the following:
1) Spring pins (some refer to as roll pins) for gas tube/gas block. Factory size is 5/64" x 5/16". These are 5/64" x 3/8". Minimal, if any is exposed when used full length or hit with a file for flush mount. 2) #2 taper pins for barrel/gas block. Factory size #2 x 3/4" long. Made is USA w/US steel. Will send you 2 of each or both to anyone who needs them. Have several sets to give away. Lower 48 only please. |
|
In need of simple A2 birdcage for .223.
If anyone has one laying around not being used, please get a hold of me via IM, Email. Thank-you for Your time, Doc @endofdays - If you've still got one, I'd most definitely take it off your hands. |
Si Vis Pacem Para Bellum!
|
Originally Posted By SenditDoc:
In need of simple A2 birdcage for .223. If anyone has one laying around not being used, please get a hold of me via IM, Email, or txt 517-5seven5-16seven5. Thank-you for Your time, Doc @endofdays - If you've still got one, I'd most definitely take it off your hands. |
|
At this moment, it looks like I'm still short a couple of parts on the first rifle I'm building to give away in the other thread, and a few more for the second.
If anybody else has any kind of muzzle device an washer, I could use a set. Also, a front forearm cap, as the one I have doesn't fit (triangle rifle cap) That ought to finish the first rifle. I also need a trigger. Not the entire FCG, just a trigger, which should finish the lower of the other. I won't be sure what I can pass along until after I get these two rifles together and into the hands of their new owners. After that, I'll see what I've got left in the closet. For sure, if anybody needs that triangle front cap, it's theirs, since I'm not planning (he says with a straight face) to build any rifle length uppers any time soon. |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
Hey guys,
In need of some small parts: - takedown springs and detents. - buffer spring and detent Trigger pins mag release bolt release and all major components I have maybe I'm forgetting something... Not looking at my build right now... I have these items to give away: 1. standard bolt releases with springs and detents 2. A bunch of random trigger springs |
|
Originally Posted By TheOTHERmaninblack:
At this moment, it looks like I'm still short a couple of parts on the first rifle I'm building to give away in the other thread, and a few more for the second. If anybody else has any kind of muzzle device an washer, I could use a set. Also, a front forearm cap, as the one I have doesn't fit (triangle rifle cap) That ought to finish the first rifle. I also need a trigger. Not the entire FCG, just a trigger, which should finish the lower of the other. I won't be sure what I can pass along until after I get these two rifles together and into the hands of their new owners. After that, I'll see what I've got left in the closet. For sure, if anybody needs that triangle front cap, it's theirs, since I'm not planning (he says with a straight face) to build any rifle length uppers any time soon. |
|
Originally Posted By SenditDoc:
Yes, please. Originally Posted By SenditDoc:
Originally Posted By ARS24-7: NP. Do you need a crush washer also? |
|
Originally Posted By kokopelli:
I'm looking for a couple things to finish a pistol build- a low-profile gas block, steel, and a pistol length gas tube and roll pin....I have a railed-top gas block I can trade or pass on to someone else who might need it. It was used but barely. |
|
http://www.combatarmory.com/gas-block-2/
Here's one that costs $8.49 delivered with the 'take15' code. That's almost cheaper than somebody can mail it to you. |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
Originally Posted By TheOTHERmaninblack:
http://www.combatarmory.com/gas-block-2/ Here's one that costs $8.49 delivered with the 'take15' code. That's almost cheaper than somebody can mail it to you. Is CC gtg or is my credit card gonna get raped? |
|
I thought I poster earlier, but I guess I didn't hit submit.
I'm new to arfcom so I figured what a better way to introduce myself, than to give away some stuff for free! Parts are used, But as follows: Midlength gas tube Milspec bolt catch Milspec(ish) A2 birdcage w/washer Magpul MOE pistol grip w/ screw and lock washer (rattle canned) Magpul MOE rail sections w/hardware GG&G castle nut clamp on sling mount I know im forgetting a few things. However, when I go check the parts bin, I will update the list. I know its not much but hey! its free! |
|
Originally Posted By FailureToFun:
I thought I poster earlier, but I guess I didn't hit submit. I'm new to arfcom so I figured what a better way to introduce myself, than to give away some stuff for free! Parts are used, But as follows: F marked front sight post w/delta ring ect. (rattle canned) Midlength gas tube Milspec bolt catch Milspec Charging handle Milspec(ish) A2 birdcage w/washer Magpul MOE pistol grip w/ screw and lock washer (rattle canned) Magpul MOE rail sections w/hardware GG&G castle nut clamp on sling mount I know im forgetting a few things. However, when I go check the parts bin, I will update the list. I know its not much but hey! its free! |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
Originally Posted By FailureToFun:
IM me your info and I will get it to you ASAP! Originally Posted By FailureToFun:
Originally Posted By TheOTHERmaninblack: As I said in the other thread, I could use the F marked front sight post w/delta ring ect. for a build I'm donating to a rifleless friend. |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
Originally Posted By FailureToFun:
I thought I poster earlier, but I guess I didn't hit submit. I'm new to arfcom so I figured what a better way to introduce myself, than to give away some stuff for free! Parts are used, But as follows: F marked front sight post w/delta ring ect. (rattle canned) Midlength gas tube Milspec bolt catch Milspec Charging handle Milspec(ish) A2 birdcage w/washer Magpul MOE pistol grip w/ screw and lock washer (rattle canned) Magpul MOE rail sections w/hardware GG&G castle nut clamp on sling mount I know im forgetting a few things. However, when I go check the parts bin, I will update the list. I know its not much but hey! its free! |
|
For those of you who have claimed any of these items so far, they will be arriving 2/13 or 2/14
Parts are used, But as follows: F marked front sight post w/delta ring ect. (rattle canned) TAKEN Midlength gas tube TAKEN Milspec bolt catch Milspec Charging handle TAKEN Milspec(ish) A2 birdcage w/washer TAKEN Magpul MOE pistol grip w/ screw and lock washer (rattle canned) TAKEN Magpul MOE rail sections w/hardware GG&G castle nut clamp on sling mount TAKEN |
|
If I haven't shipped them yet, the remainders will go out Saturday. And all are gone now. Originally Posted By blkbd:
I could use one or two, provided there is enough to go around. IM inbound Originally Posted By blkbd:
Originally Posted By -Shaggs-:
I've got a few mil spec safety selectors. Let me know if anyone needs one or two, ha. |
|
Originally Posted By -Shaggs-:
If I haven't shipped them yet, the remainders will go out Saturday. And all are gone now. Originally Posted By -Shaggs-:
If I haven't shipped them yet, the remainders will go out Saturday. And all are gone now. Originally Posted By blkbd:
Originally Posted By -Shaggs-:
I've got a few mil spec safety selectors. Let me know if anyone needs one or two, ha. |
|
Originally Posted By FailureToFun:
For those of you who have claimed any of these items so far, they will be arriving 2/13 or 2/14 Parts are used, But as follows: F marked front sight post w/delta ring ect. (rattle canned) TAKEN Midlength gas tube TAKEN Milspec bolt catch Milspec Charging handle TAKEN Milspec(ish) A2 birdcage w/washer TAKEN Magpul MOE pistol grip w/ screw and lock washer (rattle canned) TAKEN Magpul MOE rail sections w/hardware GG&G castle nut clamp on sling mount TAKEN |
History indicates that Conservative Americans only have three speeds: silence, peaceful protest rallies, and Total Industrialized Warfare. They excel at the latter.
---spartacus2002
---spartacus2002
|
Sent you an IM on the A1 sight post assy , LMK if your still looking for one ... Originally Posted By miwafr:
Anyone have an A1 sight post assy? A2 FH? 2 A2 PG's shipped to m10ken Can we not leave feedback here? |
" You Don't Always Need to Have Sex with Your Wife / X Wife, to Get a Good Fuckin !!!!
|
Originally Posted By ARS24-7:
I’ve got a set of old carbine handguards that I replaced with a better set I received from this thread. I have a set of spiral pins (I think it has all the pins for a full build) Edit-I'll see what else I can throw up here when I get a chance |
AR Sponsor