Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/29/2006 9:37:13 AM EST

the FCG is totally different than the G2's on my other ak's. The latch that holds the hammer down gets in the way of the selector lever and i cant rotate it up to take it out. any ideas? I guess Ill have to take the FCG out so I get get the selector lever off.
Link Posted: 1/29/2006 9:39:40 AM EST
how about moving the disconnector with your finger as you try to rotate the selector. or pull the trigger as you rotate it up
Link Posted: 1/29/2006 9:46:53 AM EST

tried it, ahhhhh! looks like no way in hell its gettin past!
Link Posted: 1/29/2006 9:50:01 AM EST
now is it catching the trigger itself or just the disconnector?
Link Posted: 1/29/2006 10:12:06 AM EST
You either have to pull the FCG or rotate the selector backwards and lift it over the selector stop and rivets ...
Link Posted: 1/29/2006 10:22:52 AM EST
I had the same problem with my Maadi, i had to pull the FCG to get the safety off.
Link Posted: 1/29/2006 11:39:07 AM EST
a G2 FCG would fix the whole problem.
Link Posted: 1/29/2006 11:58:16 AM EST

Originally Posted By paul_the_welder:
a G2 FCG would fix the whole problem.



I have a Maadi with a G2, I think you"ll still need to notch the flat on the selector ...
Link Posted: 1/29/2006 1:23:51 PM EST

yeah its like 1/4 inch wide on the maadi selector. I looked at my sar-1's and its like half that. Your right , time to do alittle grinding.
Top Top