Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/22/2003 5:10:20 PM EST
[Last Edit: 7/22/2003 5:13:35 PM EST by _DR]
OK, this is probably a newbie question, but how do I remove the wood buttstock from the receiver of my SAR-1? I unscrewed the two screws at the top, but don't see any others, and it truly will not budge. Am I missing something?
Link Posted: 7/22/2003 5:21:06 PM EST
It's probably wedged in there pretty tight. You can use a flat-head screwdriver to pry it out from the front end.
Link Posted: 7/22/2003 7:34:35 PM EST
thanks...i'll give that a try.
Link Posted: 7/23/2003 5:47:06 AM EST
I just changed mine out a couple weeks ago, I tried the whole prying thing as listed on this website:


to no success. I finally got it out by tapping on either side (the flatside that is) of the butstock with a hammer, wiggled right out easily. It also helped that I put the thing in a vice.

On that website above there are all sorts of helpful stuff for the Romainian Ak's.
Top Top