Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/7/2003 5:26:04 AM EST
Coming 2nd week January 2004, we will see....


They have a whole list of options available:

TYPE 1 - Receiver, basic blank shell with rails hardened and center support tube installed. No magazine well calibers machined or holes drilled in this shell. This shell be be machined for 7.62x39mm, 5.45x39mm or .223 cal. magazines. $49.99

TYPE 2 - Receiver, all holes, rails, and magazine well* machined to your specified caliber, center support tube installed. *You specify caliber: 7.62x39, 5.45x39 or .223 $69.99

TYPE 3 - Receiver, fully machined, with all holes, rails, and magazine well machined to your specified caliber (7.62x39mm 5.45x39mm or .223), center support tube installed. New selector stop, trigger guard and magazine catch installed. $100.00

TYPE 4 - Receiver, fully machined, contains all included in TYPE 3 plus new rear trunion installed $129.99

TYPE 5 - Receiver, fully machined, contains all included in TYPE 3 plus new front and rear trunion installed $174.99

TYPE 5a - Receiver, fully machined, contains all included in TYPE 3 and only new front trunion installed. No rear trunion installed $144.99

TYPE 6 - TYPE 2 Receiver with customer's parts (front & rear trunion, selector stop, trigger guard and magazine catch) installed. All original rivets must be removed by customer. Price does not include narrowing trunion.** for new 1.6mm receiver shells $140.00

**Narrow customers barrel trunion .6mm each side for 1.6mm receiver shell

**Narrow customers rear trunion .6mm each side for 1.6mm receiver shell
Link Posted: 12/7/2003 5:42:17 AM EST
Link Posted: 12/7/2003 5:58:44 AM EST
just got my SGN, and they have an ad, and the ad says it will be available in December.
Link Posted: 12/7/2003 7:33:42 AM EST
Please be fully and correctly hardened!
Link Posted: 12/8/2003 12:19:30 PM EST
If the Bulgarians & the Romanians can make an in spec AK receiver surely somebody here in America can. What we really need is somebody to make a quality milled receiver.
Link Posted: 12/8/2003 12:32:46 PM EST
Will you be able to use the RPK trunnions with this receiver due to the extra thickness without mods?
Link Posted: 12/8/2003 3:31:33 PM EST
Link Posted: 12/8/2003 11:36:28 PM EST
how do you think these will stack up against the OOW receivers?

Link Posted: 12/11/2003 2:56:15 PM EST
only time will tell if these are as good as they are supposed to be JTR8541
All indications are these will be well made, just have to wait and see.
Link Posted: 12/12/2003 4:00:23 AM EST
jt325i, you may want to check out the firing line for a quality US made milled AK receiver.
Link Posted: 12/12/2003 4:37:49 AM EST
from what I understand, the x-chief designer for Arsenal, Bulgaria supervised this project.

The dies were made in Bulgaria and true to Kalashnikovs design requierments and standards..

The steel is a special steel made in Russia and was bought in Germany (5 tons of it)

All holes are cnc machined to correct dimensions

The whole reciever is heat treated before and after welding in rails..

Most importaint thing mentioned above... The former Chief Designer of Arsenal headed up this project and covered everything from start to finnish... HIS STANDARDS for producing a high end AK reciever... EUROPEAN standards, COMBLOC standards in military weapons production.

I am saving for two of these... 7.62 and a 5.45

Link Posted: 12/12/2003 6:33:45 AM EST
[Last Edit: 12/12/2003 6:34:52 AM EST by SuperChicken]
Well then, Im just going to have to buy one! Uhh, which option would be best for a Bulgarian AK74 kit build?
Link Posted: 12/12/2003 6:45:01 AM EST
I would go with the completed version with trunnions installed ... Global has all the trunnions you need to make a 74 ... Just buy the completed one.. thats what I intend to do

I cant wait ;)

Top Top