Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 11/16/2003 6:21:40 PM EDT
[Last Edit: 11/16/2003 6:50:35 PM EDT by setlab]
Has anyone here checked these out? Is there a source for american made recievers and parts for compliance or is this kit really ment to be built on?


link- www.floridagunworks.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=FG&Product_Code=113&Category_Code=PK
Link Posted: 11/16/2003 9:34:47 PM EDT
This is not a project gun for the beginner or even the semi-skilled. This is a project which requires many hand made parts and the ability understand ATF guidelines for constructing a semi-auto rifle. I have seen some semi's built using FAL lower receivers and such. This was originally an open bolt machinegun. The firing pin is a fixed knob on the bolt face. Unless you are confident you can heat treat the bolt so it can be drilled and re-harden it, and are capable of building a firing pin (heat treating that as well) and are prepared to build a receiver from scratch of an acceptable design that you are sure will fly with the ATF, forget this rifle. There are no compliance parts avalble.
Link Posted: 11/16/2003 10:27:19 PM EDT
Ouch.. mabee in about 6 years when I get a degree in tool and die.......
Link Posted: 11/16/2003 10:46:27 PM EDT
[Last Edit: 11/16/2003 10:46:52 PM EDT by M4_Aiming_at_U]
I would like to see what OOW guys could do with one.

OOW prices are very high(too high for the AK's they are selling) IMHO, but I would pay a decent price for a working one of these.
Link Posted: 11/16/2003 10:51:45 PM EDT
[Last Edit: 11/16/2003 10:52:32 PM EDT by setlab]
Just saw a site were a guy was selling them for like 7500. I think I'll go full auto before I do that.....
Link Posted: 11/17/2003 8:06:55 AM EDT
If you have an M11-9 SOCOM is useing the RPD as an upper conversion and it has ATF aproval.
Link Posted: 11/17/2003 1:14:56 PM EDT
Semi Auto RPD for $3795.00....

http://www.gunbroker.com/auction/ViewItem.asp?Item=13628776
Link Posted: 11/17/2003 1:35:09 PM EDT
Link Posted: 11/17/2003 6:48:59 PM EDT
is that one on gunbroker the one made from a fal lower?
Link Posted: 11/17/2003 6:56:23 PM EDT
If I bought a kit to look at it and see what I think, would there be any market for it if I wouldn't want it?
Link Posted: 11/18/2003 3:34:18 AM EDT
Link Posted: 11/18/2003 5:04:59 AM EDT
Florida Gunworks SUCKS!! Their prices are sky high and their customer service and ship times are stink. I'd never buy anything from them again!!!
Link Posted: 11/18/2003 9:13:57 AM EDT
Well who else has the kits it stock? I smell a holiday wishlist comeing, lol.
Top Top