User Panel
User Panel
User Panel
TX, USA
|
Posted: 10/24/2022 6:43:51 PM EDT
[Last Edit: P35FAN]
I recently acquired a Winchester Model 70 from a family member and I`m looking for load advice.
Thanks Edit: I asked for 100 & 117 Gr loads because that`s what I currently have on hand. All advice will be appreciated regardless of bullet weight. |
|
|
|
Posted: 10/24/2022 7:09:05 PM EDT
[Last Edit: wingsnthings]
[#1]
My best load is a Ken Waters pet load also referenced in Modern Reloading (Lee manual) with a max loading of 46.0 with a 120gr bullet.
I found it very accurate with mild pressure signs. Best thing is it kills deer. .257 Roberts +P Winchester case 117gr Sierra Gameking BT 43gr H4831SC CCI 250 Magnum primer COL 2.8 inches 2746-2769fps from my Rem 700SA Eta: 0.65 inch 5 shot group |
|
|
|
|
Posted: 10/24/2022 7:18:43 PM EDT
[Last Edit: wingsnthings]
[#2]
For varmint load. Reference Lee Modern Reloading 44.0gr
.257 Roberts +P Winchester case Hornady 75gr V-Max 43-44gr H4895 WLR Primer COL 2.81 inch 3515-3549fps, 0.8-0.95 inch 100yd 5 shot groups. |
|
|
|
UT, USA
|
Posted: 10/24/2022 7:31:51 PM EDT
[#3]
I have had good luck with RL17 and IMR4831 using 100 and 110 grain bullets.
|
|
|
TX, USA
|
Posted: 10/24/2022 8:09:35 PM EDT
[#4]
Are these Plus P rounds or are you just using that case?
Gun dates from 1939 so I dont want to push it too hard. Thanks for the info! |
|
|
|
Posted: 10/24/2022 8:35:29 PM EDT
[Last Edit: wingsnthings]
[#5]
Are you sure it'sa model 70? Model 70 will handle them, converted 96 Mauser, maybe not. But I'll look up the pressures. Be back shortly.
Addendum: Yes both are ok. First reference load is 53,360psi and the varmint load reference is 54,868psi. 30-06 pressures run up to 60k psi. |
|
|
|
|
Posted: 10/24/2022 8:46:30 PM EDT
[#6]
If you are reloading, the Lee Modern Reloading manual is an incredible resource. And not expensive.
|
|
|
|
|
Posted: 10/24/2022 11:07:35 PM EDT
[#7]
I always used IMR 4064 for my Model 70 featherweight. Hodgdon's website has data.
|
|
|
|
TX, USA
|
Posted: 10/25/2022 4:37:23 PM EDT
[Last Edit: P35FAN]
[#8]
Quote HistoryOriginally Posted By wingsnthings: Are you sure it'sa model 70? Model 70 will handle them, converted 96 Mauser, maybe not. But I'll look up the pressures. Be back shortly. Addendum: Yes both are ok. First reference load is 53,360psi and the varmint load reference is 54,868psi. 30-06 pressures run up to 60k psi. Positive. Been in my wife`s family since the 40`s. Serial 23XXX. Came with a period correct Weaver 330 3X scope and mount. List I found said it was made in 39. |
|
|
|
Posted: 10/25/2022 4:41:09 PM EDT
[#9]
OST I have pair of .257's that I should shoot more.
|
|
|
|
TX, USA
|
Posted: 10/25/2022 4:42:33 PM EDT
[#10]
Quote HistoryOriginally Posted By wingsnthings: If you are reloading, the Lee Modern Reloading manual is an incredible resource. And not expensive. Thanks. I will check it out. I have loaded pistol rounds for years but I`m just getting started on loading for rifles. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
