User Panel
Originally Posted By ChaosHokie:
So I was all set on getting a 6.5 Grendel upper from a different vendor, then I had to read your review on the Larue rifle... UGH! Unfortunately, I don't have the cash for the complete rifle right now, but what do you think about the Larue upper on a decently built out lower? Is there more "magic" in the total rifle versus just the upper kit? Thanks! View Quote |
|
MAGA
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Originally Posted By LRRPF52:
http://i1085.photobucket.com/albums/j422/LRRPF52/20170816_132339_zpsonb4qvzt.jpg Did a color fill on the lower. View Quote |
|
MAGA
|
Originally Posted By LRRPF52:
http://i1085.photobucket.com/albums/j422/LRRPF52/20170816_132339_zpsonb4qvzt.jpg Did a color fill on the lower. View Quote Are you getting a tranquillo to go with that brake? |
|
"It's called 'interim' because 'Pants-On-Head Retarded Battle Rifle' was deemed to be bad for morale." - DeltaElite777
|
Originally Posted By APPARITION:
I'm sure I could google it but I'll just ask, how do you do that? View Quote View All Quotes View All Quotes Originally Posted By APPARITION:
Originally Posted By LRRPF52:
http://i1085.photobucket.com/albums/j422/LRRPF52/20170816_132339_zpsonb4qvzt.jpg Did a color fill on the lower. Let dry. Wipe off with fine fiber cloth with isopropyl alcohol until no paint smear on the surface is there anymore. I usually do the selector markings on my lowers after I FDE Cerakote them. Just a little touch to make them more mine. I'm thinking about making an American flag effect within the LaRue logo actually with some red and blue paint. Originally Posted By Grendelsbane:
Are you getting a tranquillo to go with that brake? I also am in the process of planning my Grendel SBR/pistol build, which will be suppressed of course. That will make a nice bedside gun, as well as utilitarian hunter/blaster with small overall profile for ease of carry and use. |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Well, after reading LRRP's review, and in a weak moment fueled by a couple brews, I ordered the 6.5 LaRue Ultimate Upper kit. I can assemble an upper but decided to let LaRue do that for me.
I think I'll be selling my PF barrel. |
|
|
Originally Posted By LRRPF52:
... I also am in the process of planning my Grendel SBR/pistol build, which will be suppressed of course. That will make a nice bedside gun, as well as utilitarian hunter/blaster with small overall profile for ease of carry and use. View Quote |
|
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
lve got the barrel left over from my upper kit. I was thinking of having it chopped, doing a form 1, building a supressor and welding it together for one stamp. The problem I have with this route is transportimg across state lines. So I guess I could do a pistol lower and a Griffin attachment for travel. Do the 12.5" BA barrels have a different length gas system, or is it the same as the Larue? General thoughts?
|
|
Just let them try.........
NRA Patron Member |
Originally Posted By Carlhwv:
lve got the barrel left over from my upper kit. I was thinking of having it chopped, doing a form 1, building a supressor and welding it together for one stamp. The problem I have with this route is transportimg across state lines. So I guess I could do a pistol lower and a Griffin attachment for travel. Do the 12.5" BA barrels have a different length gas system, or is it the same as the Larue? General thoughts? View Quote BA 12.5" has CLGS. I'm looking at the pistol route as well since UT doesn't allow you to ride around with a rifle locked-and-loaded in your vehicle, but no problem with a pistol. |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Originally Posted By Carlhwv:
lve got the barrel left over from my upper kit. I was thinking of having it chopped, doing a form 1, building a supressor and welding it together for one stamp. The problem I have with this route is transportimg across state lines. So I guess I could do a pistol lower and a Griffin attachment for travel. Do the 12.5" BA barrels have a different length gas system, or is it the same as the Larue? General thoughts? View Quote |
|
"It's called 'interim' because 'Pants-On-Head Retarded Battle Rifle' was deemed to be bad for morale." - DeltaElite777
|
|
Originally Posted By LRRPF52:
18" LaRue barrel has MLGS. BA 12.5" has CLGS. I'm looking at the pistol route as well since UT doesn't allow you to ride around with a rifle locked-and-loaded in your vehicle, but no problem with a pistol. View Quote |
|
Just let them try.........
NRA Patron Member |
Originally Posted By Carlhwv:
The BA barrels are out of stock. I just submitted my first and second Form 1. Anyone have a read on how long they are taking to process these days? I'm thinking that an adjustable gas block, with running it suppressed and non-suppressed, will give me flexibility on the gas side. If I were to cut the larue barrel down, are there any functional challenges the extra 2" of the MLGS wil create that the adjustable block won't account for? View Quote I know AA uses .076" for both at MLGS. Every .076" MLGS 16" Grendel I've built and test-fired has been a pussycat, whether AA or Lilja barrel. I know that if I up the charge weights to published max loads with an 18" MLGS .076" port, cyclic rate will increase noticeably, as will ejection angle. 18" MLGS is also one of the hardest to suppress with conventional cans. A LaRue 18" Stealth Grendel owner says his rifle runs the same with the LaRue Tranquillo suppressor, no changes to the gun at all. If I was going to suppress, I would consider 14.5" or 13.7" as well with MLGS. |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Originally Posted By LRRPF52:
If I was going to suppress, I would consider 14.5" or 13.7" as well with MLGS. View Quote I settled on a 7.5" multi caliber can I can use on my 762. The more compact the better, as I was thinking a SBR, suppressed when possible, for general purpose Whitetail hunter, running on a pistol lower as my traveling truck gun. All this could change if the HPA passes in the next year. I'd like to build the pistol out and run it while I wait. A few guys at the range have cans and I'm hoping to give it a try to see how it feels balance wise. It's a real pain in the butt to have to wait a year only to find out if what I'm planning runs correctly. |
|
Just let them try.........
NRA Patron Member |
Just an FYI since I had been looking for them, but Midway just got in Hornady 123gr SSTs on sale for $26.49 for 100, couldn't find them before, and Hornady brass on sale for 250 pieces for $116.
|
|
|
I've used a grease pencil to do color fill on rifles. Never had a problem with it although I wouldn't leave it out in the Arizona sun I don't think
|
|
|
I've got a 12" Faxon barrel on the way, and a TBAC Ultra 5 30 can in jail.
Should make a fun little, lightweight blaster. |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Just saw Whittaker guns has the Howa Mini on sale....
|
|
|
I've got a few questions about 6.5 Grendel and I will try to ask them without sounding overly critical of the round.
Is 6.5 Grendel competitive? I had rebarreled my precision AR to 6.5 Grendel a few years ago, but pulled it soon afterwards. Accuracy was horrible, but that was due to a bad barrel, no fault of the round. Velocity was unimpressive. I was only able to achieve 2450 with factory Hornady 123s. Had loads only got to 2400 or so before SDs went to shit. 20" barrel from custom barrel maker. Comparing 6.5 Grendel to .223 and more common PRS round at 700 yards (limit of my local series) and atmospheric conditions experienced yesterday at a "sniper" series finale: 6.5 Grendel: 123 amax or eld @ 2500 fps .223: 77 TMK @ 2800 fps 6mm Creedmoor: 105 Hybrid@ 3050 fps All these are hot but not smoking loads. Grendel: 6.2 mils drop, 1.6 drift .223: 5.3 mils drop, 1.7 drift 6mm Creedmoor: 3.6 mils drop, 1.1 drift While it does have a .1 mil drift advantage, I'm not sure if that's worth the disadvantages of cost, especially in regards to brass. I shot in 2 series this year and at the beginning of the season there were a few 6.5 Grendel shooters in each. They all got smoked early on, some switching to .223. I suspect the reason for switch wasn't the shooter or the round itself, but rather logistics. I lose 75% of my brass in a match when running a gas gun. With .223 it's not a big deal, but I can see that as a problem with 6.5 Grendel. The .223s were surprisingly competitive with 4 out of the top 10 in yesterday's match. So I guess what I'm trying to ask is: Is the slight wind advantage worth the squeeze for a high volume shooter? |
|
|
I don't have a Grendel so I can confirm any dope numbers but I don't see the Grendel being popular in the PRS Gas Gun matches because of the divisions.
I'm pretty sure you only have Open, Tac Lite(223/556), and Tac Heavy(308). The advantage of the Grendel is fitting in an Ar15. If a Grendel tries to compete with a 6.5CM or 6CM in the Open Division it'll get beat every time. If the divisions were by platform, Ar15 vs Ar10 the Grendel would be more popular. For the brass issue I would look at the brass catcher options or just plan to write it off as a loss. Whichever is the cheaper way. |
|
|
Originally Posted By Lennyo3034:
I've got a few questions about 6.5 Grendel and I will try to ask them without sounding overly critical of the round. Is 6.5 Grendel competitive? I had rebarreled my precision AR to 6.5 Grendel a few years ago, but pulled it soon afterwards. Accuracy was horrible, but that was due to a bad barrel, no fault of the round. Velocity was unimpressive. I was only able to achieve 2450 with factory Hornady 123s. Had loads only got to 2400 or so before SDs went to shit. 20" barrel from custom barrel maker. Comparing 6.5 Grendel to .223 and more common PRS round at 700 yards (limit of my local series) and atmospheric conditions experienced yesterday at a "sniper" series finale: 6.5 Grendel: 123 amax or eld @ 2500 fps .223: 77 TMK @ 2800 fps 6mm Creedmoor: 105 Hybrid@ 3050 fps All these are hot but not smoking loads. Grendel: 6.2 mils drop, 1.6 drift .223: 5.3 mils drop, 1.7 drift 6mm Creedmoor: 3.6 mils drop, 1.1 drift While it does have a .1 mil drift advantage, I'm not sure if that's worth the disadvantages of cost, especially in regards to brass. I shot in 2 series this year and at the beginning of the season there were a few 6.5 Grendel shooters in each. They all got smoked early on, some switching to .223. I suspect the reason for switch wasn't the shooter or the round itself, but rather logistics. I lose 75% of my brass in a match when running a gas gun. With .223 it's not a big deal, but I can see that as a problem with 6.5 Grendel. The .223s were surprisingly competitive with 4 out of the top 10 in yesterday's match. So I guess what I'm trying to ask is: Is the slight wind advantage worth the squeeze for a high volume shooter? View Quote Sea level 20" .223 Wylde 77gr TMK 2800fps: 5.6 drop 2.1 drift 18" 6.5 Grendel 123gr SMK 2500fps 700yds: -6.3 Mils drop/ 1.7 drift 20" 6.5 Grendel 130gr Berger OTM 2480fps 700yds: -6.2 / 1.6 Compare an SMK and the TMK, not a bullet with a lower BC for a 123gr. But yes, when I compare the 123gr SST or AMAX to the 77gr TMK, I see .1 mils of drift difference. That's 2.5" at 700yds, so yes, I personally would take 2.5" advantage of hit probability on a plate compared to not hitting it, but I would complete with a better bullet like the 123gr SMK, 123gr Scenar, or 130gr Gold Medal Match load from Federal (Berger OTM Hybrid with much higher BC .564/.290). What I see personally in my courses is a higher hit probability from the Grendel compared to both 77gr .223 and .308 168gr loads, as well as much more ease for spotters to see and hear the hit compared to .223 Rem especially. I don't know many shooters who go less than 24" with 6 Creedmoor in both gas and bolt guns, but you're not going to beat a 6mm going over 3,000fps with a G7 BC around .3 or higher unless you shoot 147gr from the 6.5 Creedmoor when looking at drift. If we compare a longer barreled Grendel with a good bullet, then we shave off some more wind drift. For the brass issue, are the 6mm Creedmoor competitors ok with losing that brass? |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Thanks for the response.
I did not realize the SMK and other had that much of an advantage over Amax/ELD. They list the same BC but as we all know some companies are more accurate than others. My figures were at 1100 feet since that was the DA yesterday and I didn't have time to mess around with it. Now that I'm home, I'm seeing similar figures to yours at 5.4 and 2.0 according to shooter. My notes have me most commonly using 5.2-5.5 at that range (at higher DA than 0) so I think yours may be more accurate. I threw the 6CM in there to show how close .223 and 6.5G are compared to other rounds. As mentioned above, PRS gas gun rules puts the 6.5 G in the open class, but in my series, its in the same class as .223. Obviously it would be unfair to compare 6.5G to 6CM. The brass loss issue was relative to .223. The hit probably is good to know. I just haven't been around known good 6.5 Grendel shooters enough to see how it performs. I ask this question because I'm considering the Larue 18" build kit as I already have a perfect competition oriented lower for it. Before yesterday I had not considered the Grendel, but a stage yesterday has me reconsidering. 6" plate at 636 yards from tripod. I took 4 shots at it and I swear my splashes were so close I couldn't have missed by more than an inch. I'm wondering if that little extra would have made the difference. I forgot to mention barrel life. My Krieger .223 barrel has around 3200 on it and has lost significant velocity. What was once 2800 is now 2690. I'd imagine 6.5 Grendel would be better in that regard. |
|
|
Originally Posted By Lennyo3034:
Thanks for the response. I did not realize the SMK and other had that much of an advantage over Amax/ELD. They list the same BC but as we all know some companies are more accurate than others. My figures were at 1100 feet since that was the DA yesterday and I didn't have time to mess around with it. Now that I'm home, I'm seeing similar figures to yours at 5.4 and 2.0 according to shooter. My notes have me most commonly using 5.2-5.5 at that range (at higher DA than 0) so I think yours may be more accurate. I threw the 6CM in there to show how close .223 and 6.5G are compared to other rounds. As mentioned above, PRS gas gun rules puts the 6.5 G in the open class, but in my series, its in the same class as .223. Obviously it would be unfair to compare 6.5G to 6CM. The brass loss issue was relative to .223. The hit probably is good to know. I just haven't been around known good 6.5 Grendel shooters enough to see how it performs. I ask this question because I'm considering the Larue 18" build kit as I already have a perfect competition oriented lower for it. Before yesterday I had not considered the Grendel, but a stage yesterday has me reconsidering. 6" plate at 636 yards from tripod. I took 4 shots at it and I swear my splashes were so close I couldn't have missed by more than an inch. I'm wondering if that little extra would have made the difference. I forgot to mention barrel life. My Krieger .223 barrel has around 3200 on it and has lost significant velocity. What was once 2800 is now 2690. I'd imagine 6.5 Grendel would be better in that regard. View Quote |
|
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
|
Originally Posted By sparkyD:
I'm showing 5.9 mils with Black Hills gold 123 smk bullets leaving my 20" at 2550fps. Now compared to my 24" .223wylde the trace is much easier to read. Especially when mirage starts factoring in. And the brass catcher's are Murphy waiting to happen. What was the temperature yesterday I plugged 82 degrees into shooter. The Black Hills gold is a little temperature sensitive compared to Hornady. But it's a little more accurate out of both my 20" and my 18" grendels. At 3200 rounds I think you need to swap barrels. I imagine you're getting some run out and inconsistencies from one round to the next. View Quote .223 barrel at 3200 rounds is still holding accuracy with some bullets. Will still hold .5 MOA with 77 scenar-L. TMKs are losing accuracy due to throat erosion increasing jump. I've found TMKs to be jump sensitive and I can't chase lands and still fit in a mag. I'm already using an ASC mag with 2.310" length. At this point my season is done and I doubt I'll compete with this barrel again. Next year I will either rebarrel, or shoot open with a 6mm CM AR I just built (if I can get it to shoot). |
|
|
Originally Posted By Lennyo3034:
I had 62 degrees plugged in to shooter, although I care more about wind drift than drop. .223 barrel at 3200 rounds is still holding accuracy with some bullets. Will still hold .5 MOA with 77 scenar-L. TMKs are losing accuracy due to throat erosion increasing jump. I've found TMKs to be jump sensitive and I can't chase lands and still fit in a mag. I'm already using an ASC mag with 2.310" length. At this point my season is done and I doubt I'll compete with this barrel again. Next year I will either rebarrel, or shoot open with a 6mm CM AR I just built (if I can get it to shoot). View Quote View All Quotes View All Quotes Originally Posted By Lennyo3034:
Originally Posted By sparkyD:
I'm showing 5.9 mils with Black Hills gold 123 smk bullets leaving my 20" at 2550fps. Now compared to my 24" .223wylde the trace is much easier to read. Especially when mirage starts factoring in. And the brass catcher's are Murphy waiting to happen. What was the temperature yesterday I plugged 82 degrees into shooter. The Black Hills gold is a little temperature sensitive compared to Hornady. But it's a little more accurate out of both my 20" and my 18" grendels. At 3200 rounds I think you need to swap barrels. I imagine you're getting some run out and inconsistencies from one round to the next. .223 barrel at 3200 rounds is still holding accuracy with some bullets. Will still hold .5 MOA with 77 scenar-L. TMKs are losing accuracy due to throat erosion increasing jump. I've found TMKs to be jump sensitive and I can't chase lands and still fit in a mag. I'm already using an ASC mag with 2.310" length. At this point my season is done and I doubt I'll compete with this barrel again. Next year I will either rebarrel, or shoot open with a 6mm CM AR I just built (if I can get it to shoot). |
|
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
|
Originally Posted By sparkyD:
I'm showing 5.9 mils with Black Hills gold 123 smk bullets leaving my 20" at 2550fps. Now compared to my 24" .223wylde the trace is much easier to read. Especially when mirage starts factoring in. And the brass catcher's are Murphy waiting to happen. What was the temperature yesterday I plugged 82 degrees into shooter. The Black Hills gold is a little temperature sensitive compared to Hornady. But it's a little more accurate out of both my 20" and my 18" grendels. At 3200 rounds I think you need to swap barrels. I imagine you're getting some run out and inconsistencies from one round to the next. View Quote View All Quotes View All Quotes Originally Posted By sparkyD:
Originally Posted By Lennyo3034:
Thanks for the response. I did not realize the SMK and other had that much of an advantage over Amax/ELD. They list the same BC but as we all know some companies are more accurate than others. My figures were at 1100 feet since that was the DA yesterday and I didn't have time to mess around with it. Now that I'm home, I'm seeing similar figures to yours at 5.4 and 2.0 according to shooter. My notes have me most commonly using 5.2-5.5 at that range (at higher DA than 0) so I think yours may be more accurate. I threw the 6CM in there to show how close .223 and 6.5G are compared to other rounds. As mentioned above, PRS gas gun rules puts the 6.5 G in the open class, but in my series, its in the same class as .223. Obviously it would be unfair to compare 6.5G to 6CM. The brass loss issue was relative to .223. The hit probably is good to know. I just haven't been around known good 6.5 Grendel shooters enough to see how it performs. I ask this question because I'm considering the Larue 18" build kit as I already have a perfect competition oriented lower for it. Before yesterday I had not considered the Grendel, but a stage yesterday has me reconsidering. 6" plate at 636 yards from tripod. I took 4 shots at it and I swear my splashes were so close I couldn't have missed by more than an inch. I'm wondering if that little extra would have made the difference. I forgot to mention barrel life. My Krieger .223 barrel has around 3200 on it and has lost significant velocity. What was once 2800 is now 2690. I'd imagine 6.5 Grendel would be better in that regard. http://www.brasscatchers.com/store/univbc.html Guy I was at the range with a year or so back had one mounted to his 6.5 Grendel rifle and I was suprised at how sturdy andreliable it was. Granted, you're only gonna get about 25-30 rounds in it before it's full, but that should be fine for a match. |
|
Chaos, confusion, despair....my work is done here. Murphy
Did you just realize the closest you'll ever be to becoming a hero is wearing your underwear outside your pants? Madcap72 |
Originally Posted By MaxxII:
How about something like this one? http://www.brasscatchers.com/store/univbc.html Guy I was at the range with a year or so back had one mounted to his 6.5 Grendel rifle and I was suprised at how sturdy andreliable it was. Granted, you're only gonna get about 25-30 rounds in it before it's full, but that should be fine for a match. View Quote View All Quotes View All Quotes Originally Posted By MaxxII:
Originally Posted By sparkyD:
Originally Posted By Lennyo3034:
Thanks for the response. I did not realize the SMK and other had that much of an advantage over Amax/ELD. They list the same BC but as we all know some companies are more accurate than others. My figures were at 1100 feet since that was the DA yesterday and I didn't have time to mess around with it. Now that I'm home, I'm seeing similar figures to yours at 5.4 and 2.0 according to shooter. My notes have me most commonly using 5.2-5.5 at that range (at higher DA than 0) so I think yours may be more accurate. I threw the 6CM in there to show how close .223 and 6.5G are compared to other rounds. As mentioned above, PRS gas gun rules puts the 6.5 G in the open class, but in my series, its in the same class as .223. Obviously it would be unfair to compare 6.5G to 6CM. The brass loss issue was relative to .223. The hit probably is good to know. I just haven't been around known good 6.5 Grendel shooters enough to see how it performs. I ask this question because I'm considering the Larue 18" build kit as I already have a perfect competition oriented lower for it. Before yesterday I had not considered the Grendel, but a stage yesterday has me reconsidering. 6" plate at 636 yards from tripod. I took 4 shots at it and I swear my splashes were so close I couldn't have missed by more than an inch. I'm wondering if that little extra would have made the difference. I forgot to mention barrel life. My Krieger .223 barrel has around 3200 on it and has lost significant velocity. What was once 2800 is now 2690. I'd imagine 6.5 Grendel would be better in that regard. http://www.brasscatchers.com/store/univbc.html Guy I was at the range with a year or so back had one mounted to his 6.5 Grendel rifle and I was suprised at how sturdy andreliable it was. Granted, you're only gonna get about 25-30 rounds in it before it's full, but that should be fine for a match. |
|
Chicken Farmer by choice hunter of shade tree's and hiding spots by nature.
|
Originally Posted By MaxxII:
How about something like this one? http://www.brasscatchers.com/store/univbc.html Guy I was at the range with a year or so back had one mounted to his 6.5 Grendel rifle and I was suprised at how sturdy andreliable it was. Granted, you're only gonna get about 25-30 rounds in it before it's full, but that should be fine for a match. View Quote |
|
|
Originally Posted By Lennyo3034:
Thanks for the response. I did not realize the SMK and other had that much of an advantage over Amax/ELD. They list the same BC but as we all know some companies are more accurate than others. My figures were at 1100 feet since that was the DA yesterday and I didn't have time to mess around with it. Now that I'm home, I'm seeing similar figures to yours at 5.4 and 2.0 according to shooter. My notes have me most commonly using 5.2-5.5 at that range (at higher DA than 0) so I think yours may be more accurate. I threw the 6CM in there to show how close .223 and 6.5G are compared to other rounds. As mentioned above, PRS gas gun rules puts the 6.5 G in the open class, but in my series, its in the same class as .223. Obviously it would be unfair to compare 6.5G to 6CM. The brass loss issue was relative to .223. The hit probably is good to know. I just haven't been around known good 6.5 Grendel shooters enough to see how it performs. I ask this question because I'm considering the Larue 18" build kit as I already have a perfect competition oriented lower for it. Before yesterday I had not considered the Grendel, but a stage yesterday has me reconsidering. 6" plate at 636 yards from tripod. I took 4 shots at it and I swear my splashes were so close I couldn't have missed by more than an inch. I'm wondering if that little extra would have made the difference. I forgot to mention barrel life. My Krieger .223 barrel has around 3200 on it and has lost significant velocity. What was once 2800 is now 2690. I'd imagine 6.5 Grendel would be better in that regard. View Quote Twist rate has an effect on BC as well, with tighter twist maximizing it generally. I don't know if Litz has tested the 77gr TMK, but he tested the 69grTMK and 3 of the .308 TMKs. The 69gr TMK had a higher BC than advertised, the 125gr .308 was higher, the 155gr TMK was lower, and the 175gr TMK was about dead-on. Sierra also makes a 130gr 6.5mm TMK. Throat life is much longer in 6.5 Grendel because we run with much lower working pressure at 50ksi max. With chambers being gas-checked with pressures higher than 55-58ksi regularly, you're going to see throat erosion. PRS guys that I know shooting 6mm re-barrel every 1k rounds and don't look back. Price of performance is worth it when you place higher in match after match, especially at some of the matches I go to where the prize tables have multiple chassis, NightForce ATACRs, USO scopes, Bartlein barrels, TBAC and SiCo suppressors, Stiller or Surgeon actions, complete rifles from JP, gear, Lapua brass, packs, bags, % off training courses, steel targets, bullets, etc. Litz BC for the 123gr SMK is .522 G1/.260 G7. That bullet looks really close to a 123gr Scenar, both of which buck the wind well. For those longer shots on smaller plates, I want all the BC I can get if the match places high value on those targets, as they should in the scoring. The cartridge really to beat for these competitions is a little 6mm Grendel, but nobody makes factory brass or ammo for it that I know of. Now you have the .590-.615 G1/.285 - .310 G7 bullets going pretty fast, with recoil like a .223 Rem, from the AR15 action. |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Anyone running the JP Silent Capture Spring setup on their Grendel? Thinking of trying one out, not sure if I should go with the standard or H2 equivalent.
|
|
|
Originally Posted By TSU45:
Anyone running the JP Silent Capture Spring setup on their Grendel? Thinking of trying one out, not sure if I should go with the standard or H2 equivalent. View Quote ETA: They're both mid-length gas systems. |
|
Originally Posted By kabal57:
Reading the same quote or sentence some random forum member said one time doesn't make much sense to me, but whatever. |
I figured this would be the best thread to post this question in. I've wanted to take the Grendel plunge for awhile but have held back until I figured out exactly what I wanted. I think I have settled on a 12.5" barrel from BA, so my question being is the 12.5 a good start into Grendel for MY needs? To give background on its purpose for me is I want a multi purpose rifle. Local range goes out to 600 yards so that is probably the farthest I'll be shooting from a bench resting aspect. I've even had some thoughts of using it in a couple carbine classes with the cheap steel wolf ammo. Hunting is at the bottom of my list but would still be a possibility to me. The allure of a light and handy rifle with a big leg up on 5.56 seems to point me in this direction. Not that it makes much of a difference but it will hopefully be wearing a Dead Air Sandman-S in the near future.
|
|
|
I just got my 12" Faxon barrel in for a lightweight, compact, suppressed do-all blaster.
Looking at PDW braces now. |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
|
Every cloud has a silver lining (except for the mushroom shaped ones… which have a lining of Iridium and Strontium 90)
|
Maybe the wrong place to post this, but Brownells has Nosler Accubond LR 6.5 129gr projectiles in stock.
Linky |
|
|
Any idea on how the Hornady 120 gr ELDs compare to the 123 gr ELDs as far as accuracy and performance? Is there even really a difference?
|
|
|
Originally Posted By bill3508:
I'm running the H2 and it's working great. View Quote View All Quotes View All Quotes |
|
|
Originally Posted By Ronnoc:
Any idea on how the Hornady 120 gr ELDs compare to the 123 gr ELDs as far as accuracy and performance? Is there even really a difference? View Quote The 120gr ELD-M, taken from the 120gr AMAX, is meant for longer throats like in the 6.5CM and .260 Rem, depending on how those are chambered. The 120gr Hornady bullets have to be seated deeper in the Grendel chamber due to the tangent ogive. |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Originally Posted By Tubashot:
I called and asked JP, they recommended the H2 for my LaRue Grendel. Not sure if I'm going to pony up or not. View Quote View All Quotes View All Quotes Originally Posted By Tubashot:
Originally Posted By bill3508:
Originally Posted By TSU45:
Anyone running the JP Silent Capture Spring setup on their Grendel? Thinking of trying one out, not sure if I should go with the standard or H2 equivalent. It runs like a race gun tuned JP that way. It feels better than any of my 5.56 guns even, the way it cycles so smoothly and like mechanical clockwork. It runs better than my MLGS 18" Lilja build with an SCS buffer/recoil system that I guess I need to tune some more with the right weights or spring. |
|
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
Originally Posted By LRRPF52:
My complete LaRue Stealth 2.0 Grendel uses a standard carbine buffer. It runs like a race gun tuned JP that way. It feels better than any of my 5.56 guns even, the way it cycles so smoothly and like mechanical clockwork. It runs better than my MLGS 18" Lilja build with an SCS buffer/recoil system that I guess I need to tune some more with the right weights or spring. View Quote Hopefully this weekend... |
|
|
So, I took my new 6.5 Grendel upper out today, it is a Bear Creek Arsenal upper 16" a govt profile contour and nitrided. I was shooting 123 AMAX factory loads. The trigger is a Geisele SS E. The FH is a YHM with a YHM Ti 762 Phantom.
My first target with the suppressor on looked like Ray Charles and Stevie Wonder were out at the range with a shotgun. That is a 10 round group. I decided to try it without the suppressor, the second target which shot high of the POA grouped vastly better (the flyers were me, not the most steady). Not sure why that is happening. I was thinking of trying my Recce 7 but wanted it lighter for hunting, plus I had the mount already. Might try buying a mount for my Recce and try it. I have used the YHM on a bolt gun, Ruger GSR in 308, and it worked great. Attached File Attached File Attached File |
|
The hammer of the gods
Will drive our ships to new lands, To fight the horde, singing and crying: Valhalla, I am coming! |
Originally Posted By Ronnoc:
So, I took my new 6.5 Grendel upper out today, it is a Bear Creek Arsenal upper 16" a govt profile contour and nitrided. I was shooting 123 AMAX factory loads. The trigger is a Geisele SS E. The FH is a YHM with a YHM Ti 762 Phantom. My first target with the suppressor on looked like Ray Charles and Stevie Wonder were out at the range with a shotgun. That is a 10 round group. I decided to try it without the suppressor, the second target which shot high of the POA grouped vastly better (the flyers were me, not the most steady). Not sure why that is happening. I was thinking of trying my Recce 7 but wanted it lighter for hunting, plus I had the mount already. Might try buying a mount for my Recce and try it. I have used the YHM on a bolt gun, Ruger GSR in 308, and it worked great. https://www.AR15.Com/media/mediaFiles/73248/IMG_20171009_164054316__2_-329428.JPG https://www.AR15.Com/media/mediaFiles/73248/IMG_20171009_163636278__2_-329430.JPG https://www.AR15.Com/media/mediaFiles/73248/IMG_20171009_163647760__2_-329431.JPG View Quote I wouldn't shoot anything else through it with a can attached until I got it checked out. Edit: or contact bear Creek to see if they'll look at it. |
|
|
I will pull the FH off and check, to get and see if I can get an idea.
|
|
The hammer of the gods
Will drive our ships to new lands, To fight the horde, singing and crying: Valhalla, I am coming! |
Some further checking:
Looks like the dimensions might be an issue. Barrel diameter at the shoulder is .700 and YHM states it should be .720 for indexing on the shoulder Thread diameter is .620 and YHM states the max is .625 The length of the threads from the shoulder to the muzzle is .620 and YHM says it should be .710 for indexing off of the muzzle. It is .620-.680 for indexing off of the shoulder. FYI for those who get and want to suppress it, check the threading requirements. |
|
The hammer of the gods
Will drive our ships to new lands, To fight the horde, singing and crying: Valhalla, I am coming! |
How does the 123g ELD compare to the 185g Berger FGMM? Factory loads and lets say 20inch barrels.
I got out of the long range game again when I got a new house but am looking at building a 6.5g or getting a .308 Tikka. |
|
|
18 of the top 20 places in the last local PRS match were 6mm and 6.5mm, with the 6.5mm Creedmoor placing 10 of the top 15 places. No one is shooting 6.5 Grendel in these matches, as it is out paced by the Creedmoors. If you are into LR shooting, you might want to look closer at the large frame kits. The Grendel is a great cartridge for a small frame AR.
|
|
Just let them try.........
NRA Patron Member |
AR15/AR10 student since 1980s
Co-author of 6.5 Grendel Reloading Handbooks Vol I & II NRA Certified Instructor: Basic, Pistol, Rifle, RSO, Shotgun |
My Grendel is getting a big brother soon. It’s going to be fun having both side by side to play with.
|
|
A bad day at the range is better than a good day at work
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.